Archive

Field Service Engineer

|

14 July 2026

|
No comments

Field Service Engineer Jobs

STS Technical Services is hiring Field Service Engineers to support on-site electrical distribution system evaluations, arc flash risk assessments, infrared thermography and electrical training. This home office-based role requires candidates to reside within 50 miles of a major metropolitan national airport and includes 50 to 70 percent U.S.-based overnight travel and on-site field work.

Position Overview

The Field Service Engineer will perform electrical power system studies, gather electrical system data, support arc flash service proposals and deliver technical recommendations to customers across multiple industries. This role works closely with sales teams, customers, maintenance personnel, safety teams, plant engineering groups and management to ensure electrical safety, code compliance and accurate project delivery.

What You’ll Be Doing

  • Perform electrical power system engineering studies and infrared thermography for clients across multiple industries
  • Assist the sales team and communicate with clients regarding arc flash services offered
  • Project manage assigned customer projects from job kickoff through job closeout
  • Evaluate documents and gather electrical data to create engineering study project proposals
  • Perform on-site electrical system assessments to document existing system configuration, equipment ratings, conductor lengths, ampacities and overcurrent protective device information
  • Perform power system studies including arc flash studies, short circuit coordination studies and fault current studies
  • Perform general and site-specific arc flash training for customers
  • Perform arc flash audits and gap analysis
  • Create customer reports and communicate findings to customers
  • Identify electrical code violations
  • Create arc flash reports, including arc flash labels, single-line diagrams and recommendations to reduce incident energy
  • Serve as Subject Matter Expert and trainer to internal personnel on arc flash safety, assessments, audits and calculations

What You Will Need to Be Successful

  • Bachelor’s degree from an accredited university or college
  • In lieu of education, 10 years of practical electrical engineering, engineering calculation or field experience in the electrical building construction industry is acceptable
  • Minimum of 5 years of electrical engineering, engineering calculation experience or related field experience
  • Ability to understand installed electrical distribution systems, electrical schematic diagrams and engineering documentation
  • Knowledge of NFPA 70, NFPA 70E and OSHA requirements related to arc flash and electrical distribution
  • Self-directed and able to solve problems in the field with no supervision
  • Proficiency with SKM PowerTools, AutoCAD and Microsoft Office products, including Word, Excel and PowerPoint
  • Ability to train customers on general arc flash principles and site-specific arc flash requirements
  • Ability to interface with customers, including maintenance, safety and plant engineering personnel, as well as upper levels of management
  • Proficiency in generating technical reports, including recommendations to clients
  • Ability to travel 50 to 70 percent for U.S.-based overnight travel and on-site field work
  • Must reside within 50 miles of a major metropolitan national airport.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with some of the largest names in aerospace, manufacturing, defense and industrial industries. Our professional recruitment teams connect skilled professionals with career opportunities at client locations throughout the United States and around the world.

If you want to speak with a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedSTS

Aerospace Electrical Engineer (Entry-Level to Experienced)

|

13 July 2026

|
No comments

Reliability Engineer Jobs in Monterrey, Mexico

STS Technical Services is hiring Aerospace Electrical Engineers in Lakehurst, New Jersey.

This is a contract-to-direct hire opportunity supporting advanced military aircraft integration programs for a leading aerospace and defense organization. Candidates may be considered for direct employment at or before the six-month mark based on performance and business needs.

We are seeking experienced aerospace electrical engineers with aircraft systems integration backgrounds. Strong consideration will also be given to motivated junior engineers who possess relevant electrical engineering education and a desire to build a career in aerospace and defense.

Hiring Note: Candidates must be authorized to work in the United States. An active Secret Security Clearance is preferred. Candidates without an active clearance must be eligible to obtain and maintain an Interim Secret Clearance.

Position Details

  • Job Title: Aerospace Electrical Engineer
  • Location: Lakehurst, New Jersey
  • Employment Type: Contract-to-Direct Hire

Position Summary

The Aerospace Electrical Engineer will design, integrate, test, and implement electrical and avionics systems installed on military aircraft. This role supports communications, navigation, GPS, SATCOM, RF systems, mission equipment, weapons integration, and other aircraft modification programs.

Working alongside multidisciplinary engineering teams, this individual will help ensure aircraft modifications are completed safely, efficiently, and in accordance with customer and regulatory requirements.

Essential Responsibilities

  • Lead aircraft electrical integration activities supporting avionics and mission systems
  • Develop and review electrical engineering designs, schematics, wiring diagrams, harness drawings, cable routing packages, and installation documentation
  • Perform electrical load analyses, power distribution studies, and system interface evaluations
  • Research and specify electrical components, including wiring, connectors, relays, circuit protection devices, and related hardware
  • Prepare engineering documentation and technical reports supporting airworthiness and certification requirements
  • Support system-level testing, troubleshooting, validation, and verification activities
  • Develop test procedures, qualification plans, and verification documentation
  • Participate in customer kickoff meetings, Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), and program status reviews
  • Provide technical guidance to technicians, manufacturing personnel, drafters, technical writers, inspectors, and support staff
  • Collaborate with customers and internal stakeholders to ensure technical requirements are achieved

Required Qualifications

  • Bachelor’s degree in Electrical Engineering or a related engineering discipline
  • Experience supporting electrical systems design, integration, or aircraft modification projects
  • Knowledge of aircraft electrical power distribution, wiring systems, avionics integration, and aircraft electrical interfaces
  • Strong technical writing and engineering documentation skills
  • Proficiency with engineering software and Microsoft Office applications
  • Ability to interpret engineering drawings, specifications, and customer requirements
  • Strong analytical, troubleshooting, and problem-solving skills

Preferred Qualifications

  • Eight or more years of aerospace or defense electrical engineering experience
  • Aircraft electrical systems integration experience
  • Military aircraft modification or sustainment experience
  • Knowledge of communications, navigation, RF systems, SATCOM, GPS, mission systems, or weapons integration
  • Familiarity with EMI/EMC compliance requirements
  • Experience using AutoCAD or similar CAD software
  • Active Secret Security Clearance

Security Requirements

  • Active Secret Security Clearance is highly preferred
  • Candidates without an active clearance will be considered if they are eligible to obtain and maintain an Interim Secret Security Clearance and ultimately satisfy all security clearance requirements

Work Environment

  • Fast-paced aerospace engineering environment supporting military aircraft programs
  • Collaborative work alongside engineering, production, quality, and program management teams
  • Occasional travel may be required
  • Overtime may be required to support program schedules and customer commitments

Why Join STS Technical Services?

This is an opportunity to contribute to advanced military aviation programs supporting critical national defense initiatives. You’ll work alongside experienced engineering professionals on complex aircraft integration projects while gaining exposure to cutting-edge aerospace technologies.

Whether you’re an experienced aerospace electrical engineer or an early-career professional looking to grow, this role offers the opportunity to develop your technical skills while supporting meaningful, mission-critical work.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, defense, manufacturing, and industrial organizations throughout the United States. We connect skilled professionals with high-impact opportunities that support some of the nation’s most advanced engineering and manufacturing programs.

Apply Today

If you’re ready to advance your aerospace engineering career while supporting military aircraft integration and national defense programs, apply today to join STS Technical Services in Lakehurst, New Jersey.

#IndeedAM

Test Site Parts Coordinator (Yuma)

|

13 July 2026

|
No comments

JLTV A2 Test Site Engineer (Travel Position)

STS Technical Services is hiring a Test Site Parts Coordinator in Yuma, Arizona.

This position supports Joint Light Tactical Vehicle (JLTV) Family of Vehicles testing activities at Yuma Test Center and plays a dual role supporting both Field Service Representative (FSR) operations and parts coordination logistics.

The Test Site Parts Coordinator provides hands on technical vehicle support during testing while managing parts tracking, logistics, and accountability for Government Furnished Equipment (GFE) and Contractor Furnished Equipment (CFE). This role is ideal for individuals with strong mechanical aptitude, military vehicle experience, and advanced inventory tracking skills.

The ideal candidate will have experience supporting tactical vehicle platforms such as JLTV or HMMWV, strong troubleshooting capability, and proficiency with digital inventory systems. SAP experience is highly preferred.

Position Responsibilities

Field Service Representative (FSR) Responsibilities

  • Serve as a subject matter expert on automotive systems supporting the JLTV Family of Vehicles, companion trailers, and related military vehicle platforms
  • Provide technical support during vehicle testing, troubleshooting, and maintenance activities at Yuma Test Center and other CONUS or OCONUS testing locations as required
  • Assist engineering teams during prototype and development testing by identifying mechanical or system issues and supporting corrective actions
  • Conduct operator and maintainer level training such as OPNET and FLMNET for U.S. and international customers when required
  • Create detailed field service reports documenting vehicle status, deficiencies, and repairs
  • Participate in testing reviews, status meetings, and provide daily updates regarding vehicle readiness and test progress
  • Serve as liaison between field operations, engineering teams, and program leadership regarding vehicle performance or product concerns

Parts Coordinator Responsibilities

  • Manage the Test Support Systems Support Package (SSP), Government Furnished Equipment (GFE), and Contractor Furnished Equipment (CFE) supporting JLTV testing programs
  • Record, log, and tag damaged parts and prepare shipping documentation for replacement or repair
  • Maintain detailed parts tracking logs including shipment dates, carriers, and tracking numbers
  • Coordinate shipments of damaged or replacement parts and follow up on delivery confirmations or discrepancies
  • Maintain accountability records for all GFE and CFE supporting JLTV vehicles and companion trailers
  • Deliver and retrieve parts from maintenance facilities using company vehicles while ensuring accurate inventory control
  • Package and ship parts and equipment to repair facilities or supply locations
  • Utilize Microsoft Office and internal tracking systems to manage inventory, generate reports, and maintain accurate documentation

Required Qualifications

  • Automotive vocational training or a minimum of five years of technical experience working on military or commercial vehicles
  • Minimum three years of experience supporting the JLTV platform preferred
  • Experience working with military vehicle platforms such as JLTV, HMMWV, or similar tactical vehicles
  • Strong troubleshooting skills related to vehicle systems and diagnostics
  • Strong computer proficiency including Microsoft Office and digital inventory tracking systems
  • SAP experience preferred
  • Excellent organizational skills and attention to detail
  • Ability to work independently and collaboratively in a vehicle testing environment
  • Valid driver’s license required
  • Ability to obtain and maintain a Common Access Card (CAC) and U.S. Government security clearance
  • Ability to obtain and maintain a U.S. Passport

Preferred Qualifications

  • ASE certifications
  • Prior military MOS related to vehicle maintenance such as 91B, 91H, or similar
  • Experience supporting government or OEM prototype vehicle testing programs
  • Familiarity with vehicle diagnostic tools and CAN BUS systems

Travel Requirements

  • Up to 90 percent travel may be required to support testing operations at various CONUS and OCONUS locations

Physical Requirements

  • Ability to stand, kneel, bend, and work around vehicles and mechanical equipment
  • Occasional lifting up to 25 pounds
  • Ability to work in both office environments and outdoor test facilities

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, defense, manufacturing, and industrial organizations across the United States. Our teams connect skilled professionals with long term career opportunities supporting some of the most advanced engineering, maintenance, and defense programs in the world.

#IndeedSTS

JLTV A2 Production Support

|

10 July 2026

|
No comments

JLTV A2 Test Site Engineer (Travel Position)

STS Technical Services is hiring JLTV A2 Production Support Technicians in South Bend, Indiana.

Hiring Note: All candidates must currently be authorized to work in the United States.

Position Summary

STS Technical Services is seeking experienced JLTV A2 Production Support Technicians to support production operations by diagnosing, repairing, modifying, and upgrading defense light wheeled vehicles within a manufacturing or retrofit facility. This role works closely with production, quality, and engineering teams to ensure vehicles are built, reworked, and delivered to specification while maintaining safety, efficiency, and quality standards.

What You’ll Do:

  • Diagnose, repair, modify, and retrofit defense light wheeled vehicles in a production plant environment
  • Perform installation, removal, and rework of mechanical, electrical, and structural vehicle components per engineering specifications
  • Support production line operations, including troubleshooting build issues and resolving defects to maintain workflow
  • Coordinate with internal teams (production, quality, engineering, and materials) to ensure timely completion of retrofit activities
  • Interpret technical drawings, work instructions, and service manuals to execute assigned tasks accurately
  • Identify and escalate recurring issues, contributing to process improvements and corrective actions
  • Ensure all work is completed in compliance with safety standards, quality requirements, and production schedules
  • Support validation, inspection, and testing of retrofitted vehicles prior to release
  • Maintain accurate documentation of work performed, including repairs, modifications, and parts usage

What You’ll Bring:

  • Prior experience working with JLTV A0/A1 platforms is required
  • Ability to diagnose and repair mechanical and electrical systems on defense vehicles
  • Experience working in a production, manufacturing, or heavy equipment environment preferred
  • Degree in vehicle service repair, heavy equipment, or diesel technology preferred; High School Diploma or equivalent required
  • Valid Driver’s License

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading organizations across aerospace, defense, manufacturing, and industrial sectors. We connect skilled professionals with opportunities that demand precision, accountability, and real-world expertise.

If you are ready to support mission-critical equipment and bring your JLTV experience to a high-impact role, apply today or call 1-800-359-4787 to speak with a recruiting professional.

STS Technical Services is an Equal Opportunity Employer.

#IndeedSTS

FMTV Field Service Representative (50% – 100% Travel)

|

10 July 2026

|
No comments

STS Technical Services is hiring Traveling Field Service Representatives near Joint Base Lewis-McChord in Tacoma, Washington to support military wheeled vehicle maintenance operations. This role is ideal for experienced technicians who are comfortable working independently while representing STS directly to military customers and service providers.

This position requires 50% to 100% travel. When not traveling, Field Service Representatives will report to the assigned local military installation.

Candidates must live within 50 miles of Joint Base Lewis-McChord, Tacoma, Washington.

Position Overview

The Traveling Field Service Representative is responsible for deprocessing military wheeled vehicles, troubleshooting mechanical systems, performing repairs, coordinating parts ordering, and documenting deficiencies. This is a stand-alone position requiring professionalism, accountability, and strong communication skills.

You will serve as the primary point of contact for customers at each supported site and represent the full STS team in the field.

Key Responsibilities

  • Deprocess military wheeled vehicles
  • Perform troubleshooting, diagnosis, and repair of vehicle systems
  • Order required parts to support maintenance operations
  • Submit a deficiency report for each inspected vehicle
  • Coordinate daily with the Warranty department
  • Utilize Microsoft Teams and One Warranty systems
  • Attend scheduled meetings and report on daily operational events
  • Maintain a professional appearance and customer-focused demeanor at all times
  • Communicate directly with customer points of contact at each location
  • Coordinate travel schedules with the STS travel team
  • Submit weekly status reports
  • Represent STS independently while working at supported installations

Position Requirements

  • Active Class A or Class B CDL
  • Ability to travel up to 100% as operationally required
  • Must reside within 50 miles of Joint Base Lewis-McChord, Tacoma, Washington
  • Strong mechanical troubleshooting and diagnostic skills
  • Ability to work independently with minimal supervision
  • Professional communication and customer service skills

Travel and Per Diem Information

Per diem is authorized only when traveling 50 miles or more from your Home of Record near the assigned local military installation.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm supporting aerospace, defense, manufacturing, and industrial operations across the United States. We provide skilled technical professionals who support mission-critical military and commercial operations nationwide.

#IndeedSTS

Automotive Offline Technician

|

9 July 2026

|
No comments

Automotive End of Line Technician Jobs in Spartanburg, South Carolina

STS Technical Services is hiring Automotive End of Line Technicians in Spartanburg, South Carolina. This role sits at the final stage of the build process where systems are tested, validated, and cleared for delivery. If you can diagnose issues, verify performance, and take ownership of quality before a vehicle leaves the line, this is where you step in.

Position Overview

The End of Line Automotive Technician is responsible for assembling, validating, and troubleshooting vehicle systems to ensure final product readiness. This role requires strong mechanical and electrical troubleshooting skills, along with the ability to identify defects and support corrective actions before vehicles move forward.

Essential Duties

  • Maintain awareness of risks associated with high voltage, hydraulic, and pneumatic systems
  • Perform first-time installation of detail parts onto vehicles
  • Reinstall all removed components
  • Conduct functional testing of all assembled systems
  • Apply strong mechanical aptitude to assembly and validation tasks
  • Troubleshoot electrical, hydraulic, and mechanical systems using diagrams and technical documentation
  • Support efficient operations across multiple workstations
  • Position and fasten subassemblies including wiring, hoses, panels, doors, and underbody components
  • Use manipulators and tools according to standard work instructions
  • Complete functional testing and validation checks
  • Serve as a first line of defense for quality through ongoing inspections
  • Assist in identifying root causes of defects and implementing corrective actions
  • Maintain workplace organization and follow 5S standards to ensure a safe and clean environment
  • Perform additional duties as assigned

Minimum Qualifications

  • Minimum of 3 years of experience in automotive manufacturing
  • Mechanical and electrical troubleshooting experience
  • Strong computer, math, and reading skills
  • Ability to multitask and adapt to changing processes
  • Ability to follow established procedures and complete work accurately
  • Strong communication skills with leadership and team members
  • Team-oriented mindset with the ability to support peers

Preferred Qualifications

  • High school diploma or GED or equivalent certification
  • Four years of experience as an assembler, preferably in the automotive industry

Competencies

  • Accountability and ownership of work
  • Strong attention to detail
  • Team-oriented approach to problem solving
  • Ability to collaborate effectively
  • Flexibility and adaptability in a fast-paced environment
  • Initiative and proactive thinking
  • Strong insight into processes and problem solving
  • Commitment to meeting standards and delivering quality work
  • Integrity and adherence to company values
  • Ability to manage stress and perform under pressure
  • Reliability and dependability
  • Leadership through guidance and influence

Working Conditions

  • Physical Demands: Frequent standing, walking, lifting, and repetitive motion; occasional climbing and bending
  • Non-Physical Demands: Problem solving, communication, and sustained focus
  • Environmental Conditions: Exposure to noise, dust, and changing temperatures
  • Work Schedule: Routine shift hours with occasional workload fluctuations

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense, and industrial organizations. We connect skilled professionals with high-impact career opportunities across the United States. If you are ready to get to work, we are ready to help.

#IndeedSTS

Automotive Electrical Technician

|

9 July 2026

|
No comments

Automotive Electrical Technician Jobs in Spartanburg, South Carolina

STS Technical Services is hiring an Automotive Electrical Technician in Spartanburg, South Carolina. This role focuses on diagnosing and repairing electrical systems in advanced vehicle assemblies, including wiring harnesses and electrical components. If you understand schematics, can troubleshoot defects, and take pride in precision work, this is where you get after it.

Job Summary

The Electrical Technician is responsible for diagnosing and repairing electrical defects while supporting the assembly and inspection of vehicle systems and components. This includes identifying discrepancies that impact equipment performance and product quality, as well as assembling and repairing wiring harnesses and electrical systems.

Essential Duties and Responsibilities

  • Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards; use best practices to follow all safe procedures in assembling and testing of all products in assigned job function
  • Ability to interpret and process information through interaction with the MES System, including performing required tasks and confirming results
  • Read and interpret wiring schematics
  • Follow written instructions and input data accurately to prevent assembly issues and quality defects
  • Inspect and repair supplier wiring harnesses
  • Diagnose and repair electrical defects throughout the NGDV
  • Utilize specialized equipment including DVM, torque tools, DC tools, and hand tools
  • Assist in identifying root causes of defects and implementing preventative actions

Minimum Qualifications

  • 3 years or more of relevant experience or high school diploma or equivalent education
  • Previous experience with basic hand tools
  • Previous experience with basic electrical tools
  • Vocational training, apprenticeship, or related experience in automotive electrical systems

Preferred Qualifications

  • Previous experience working in a manufacturing operations environment
  • ASE Certification
  • Previous battery electric vehicle experience
  • Zero safety or quality incidents within the last 12 months
  • Ability and willingness to learn how to operate a truck and transport within facility grounds

Core Competencies

  • Champion Change
  • Lead Courageously
  • Coach and Develop
  • Build Relationships
  • Provide Direction
  • Establish Plan
  • Drive for Results
  • Demonstrate Functional Knowledge

Basic Competencies

  • Internal and external communication and coordination
  • Ability to read, write, and interpret instructions, procedures, and safety rules
  • Decision-making within established procedures and operational guidelines
  • Problem solving requiring interpretation of standard practices and procedures

Working Conditions

  • Physical Demands: Frequent standing, walking, reaching, lifting, and tool use; occasional climbing, bending, and driving
  • Non-Physical Demands: Analysis, communication, problem solving, and sustained mental activity
  • Environmental Demands: Exposure to noise, dust, temperature changes, and task variability
  • Work Schedule: Routine shift hours with occasional overtime or schedule adjustments as needed

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense, and industrial organizations. We connect skilled professionals with high-impact career opportunities across the United States. If you are ready to get to work, we are ready to help.

#IndeedSTS

Traveling NGDV Field Service Representatives

|

6 July 2026

|
No comments

STS Technical Services is seeking Traveling Field Service Representatives to support troubleshooting, maintenance, and vehicle repair operations across the United States. This is an 80% travel role where technicians will support multiple field locations and work directly with end users.

The Field Service Technician is responsible for delivering in-service training, performing diagnostics, and completing repairs at customer sites. This role requires strong technical ability, independence, and the professionalism to represent the company in the field.

Job Responsibilities

  • Provide product orientation and operational training at customer locations
  • Diagnose and repair equipment issues onsite
  • Assist dealer service technicians with troubleshooting and repairs via onsite support, phone, or email
  • Follow up on completed repairs to ensure customer satisfaction
  • Troubleshoot customer concerns and determine effective resolutions

Qualifications

  • High school diploma or equivalent required
  • Minimum of 5 years of experience in automotive, heavy truck, or marine repair
  • Minimum of 2 years of experience working on electric vehicles
  • Previous experience as a mobile mechanic required
  • Ability to travel up to 80%

Preferred Qualifications

  • Strong electrical systems background
  • Strong written and verbal communication skills
  • ASE certifications

Physical Requirements

  • Frequent standing, walking, reaching, bending, and kneeling
  • Frequent lifting, carrying, pushing, and pulling up to 50 pounds
  • Occasional sitting, climbing, driving, and typing
  • Ability to perform repetitive upper extremity motion and fine motor tasks

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading organizations across aerospace, manufacturing, defense, and industrial sectors. We connect skilled professionals with opportunities that require technical expertise, independence, and real-world problem solving.

If you are ready to take your skills on the road and solve problems where they happen, apply today or call 1-800-359-4787 to speak with a recruiting professional.

STS Technical Services is an Equal Opportunity Employer.

#IndeedSTS

M88A2 Field Service Technician

|

6 July 2026

|
No comments

STS Technical Services is hiring an M88A2 Field Service Technician in Fort Cavazos, Texas.

This role is built for an experienced tracked vehicle mechanic who knows military maintenance environments, understands recovery vehicle platforms and can troubleshoot complex mechanical, electrical and hydraulic issues in the field.

You will support maintenance operations on the M88A1/A2 Recovery Vehicle platform by performing diagnostics, repairs, technical assistance and documentation while working closely with military personnel and field service teams.

Position Summary

The M88A2 Field Service Technician will provide field maintenance support on the M88A1/A2 Recovery Vehicle platform. This position supports military maintenance operations by performing field-level troubleshooting, diagnostics, repairs and technical assistance on tracked combat and recovery vehicles.

Travel may be required based on operational needs.

Responsibilities

  • Perform field-level maintenance, troubleshooting and repair on M88A1/A2 vehicles and similar tracked combat vehicles.
  • Assist military personnel with scheduled and unscheduled maintenance activities.
  • Diagnose mechanical, electrical, hydraulic and vehicle system issues using applicable technical manuals and procedures.
  • Read and interpret technical manuals, wiring diagrams and maintenance documentation.
  • Provide technical guidance and recommendations for repairs and corrective actions.
  • Complete maintenance documentation and reports using computer-based systems.
  • Support maintenance assistance teams while working closely with military personnel and field service representatives.
  • Maintain compliance with all safety, quality and operational requirements.

Required Qualifications

  • High School Diploma or GED.
  • 4 to 8+ years of experience performing maintenance and troubleshooting on M88 family vehicles or similar U.S. Army tracked combat vehicle platforms.
  • Strong understanding of tracked vehicle operation, troubleshooting, preventive maintenance and repair.
  • Ability to read and interpret technical manuals, wiring diagrams and schematics.
  • Proficiency with computer-based systems for data entry, reporting and documentation.
  • Ability to work independently and as part of a team, including mentoring other mechanics when required.
  • Ability to analyse complex technical problems and provide sound recommendations.
  • Prior military service candidates must have an Honorable Discharge.
  • Must be able to obtain and maintain a Secret Security Clearance and Common Access Card.
  • Must be willing to travel as required.
  • Demonstrated professionalism, integrity and commitment to safety.

Desired Qualifications

  • Recovery School graduate.
  • Associate degree from an accredited college or university.
  • Prior military experience in maintenance-related MOSs such as 91H, 91M, 91A or 91B.

Additional Information

  • Location: Fort Cavazos, Texas
  • Travel: Required
  • Security Clearance: Must be able to obtain and maintain a Secret Clearance and Common Access Card

This role is ideal for experienced military vehicle mechanics with a strong background supporting tracked combat and recovery vehicle platforms in field maintenance environments.

About STS Technical Services

STS Technical Services is a leading provider of workforce solutions across aviation, aerospace, defense, manufacturing and industrial markets. We connect skilled professionals with companies that need technical expertise, operational support and project-based talent to keep mission-critical work moving.

If you have hands-on M88A1/A2 experience and the ability to support field maintenance operations with discipline, accuracy and professionalism, we encourage you to apply today.

#IndeedSTS

Automotive Mechanical Technician

|

2 July 2026

|
No comments

Automotive Mechanical Technician

STS Technical Services is hiring Automotive Mechanical Technicians in Spartanburg, South Carolina. This role focuses on installing, troubleshooting, and validating mechanical systems within a manufacturing environment. If you can diagnose problems, work with precision, and keep builds moving without cutting corners, this is where you get to work.

Job Summary

The Mechanical Technician is responsible for installing, troubleshooting, and operating specialized systems within vehicle assemblies. This role also supports team development by training assembly personnel and ensuring proper system usage during build and final inspection processes. Strong communication and teamwork are critical to success in this position.

Essential Duties and Responsibilities

  • Maintain safety awareness when working with high voltage, high pressure hydraulic, and pneumatic systems
  • Troubleshoot, diagnose, and repair products
  • Perform first-time installation of detail parts onto vehicles
  • Reinstall all removed components
  • Clean parts before and after installation
  • Conduct functional testing of assembled systems
  • Apply strong mechanical aptitude to support build and repair processes
  • Work independently to meet production schedules
  • Fabricate and rework parts safely for component assembly
  • Diagnose and repair low voltage control systems

Minimum Qualifications

  • High school diploma or GED
  • 3 or more years of mechanical experience in an automotive manufacturing environment
  • Mechanical and electrical troubleshooting experience

Preferred Qualifications

  • Ten or more years of mechanical experience in automotive or machinery applications
  • Experience using basic hand tools
  • Understanding of JD Edwards system
  • Electrical system programming knowledge
  • Experience with Microsoft Office programs
  • Experience with general fabrication equipment
  • Ability to read and interpret engineering drawings

Core Competencies

  • Champion Change
  • Lead Courageously
  • Coach and Develop
  • Build Relationships
  • Provide Direction
  • Establish Plan
  • Drive for Results
  • Demonstrate Functional Knowledge

Basic Competencies

  • Internal and external communication and coordination
  • Ability to read, write, and interpret instructions and procedures
  • Decision-making within established processes
  • Problem solving requiring interpretation of standard practices and procedures

Working Conditions

  • Physical Demands: Frequent standing, walking, lifting, and tool use; occasional climbing and driving
  • Non-Physical Demands: Analysis, communication, and problem solving
  • Environmental Demands: Exposure to noise, dust, and changing work conditions
  • Work Schedule: Routine shift hours with occasional overtime or schedule adjustments

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense, and industrial organizations. We connect skilled professionals with high-impact career opportunities across the United States. If you are ready to get to work, we are ready to help.

#IndeedSTS