Archive

A&P Technicians

|

2 October 2026

|
No comments

STS Technical Services is hiring A&P Technicians in Nashville, Tennessee.

Job Description:

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Duties & Responsibilities:

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer’s (OEM’s) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.

Qualifications:

Education:

  • High School/ GED
  • A&P

Experience:

  • Required: A & P License; minimum 2 to 5 years’ experience with small aircraft/ general aviation trained in one aircraft type; proficient and demonstrated skill with the aircraft.
  • Several years or actual and recent depot level aircraft maintenance and repair experience is required, (repair of mechanical systems, components, hydraulics, pneumatics, plumbing, rigging etc.); proficiency with interpretation of original equipment manufacturer’s technical data or work package instructions; experience using power or pneumatic hand tools.

Knowledge, Skills & Abilities:

  • Assignments require Standard Knowledge of a Technical Area.
  • Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
  • Performs moderately complex Technical Assignments.
  • Assists Advanced Level Technicians on more complex technical assignments.
  • Knowledge of machines and tools, including their uses, repairs and maintenance.
  • Knowledge of principles and processes for providing customer service.
  • Skilled with repairing, troubleshooting, installing and equipment maintenance.
  • Knowledge of FAA requirements for aircraft maintenance procedures
  • Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.

Working Conditions / Environment / Special Requirements:

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations
  • Ability to obtain a SIDA badge may be a requirement for this position

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Mechanic

|

1 October 2026

|
No comments

Aircraft Sheetmetal Assembly Mechanic Job in Stuart, Florida STS Technical Services

STS Technical Services is hiring Aircraft Mechanics in East Alton, Illinois to perform high-level inspections, troubleshooting, repairs, and system adjustments on corporate aircraft. This is a hands-on position for experienced A&P licensed professionals who take pride in precision maintenance and quality workmanship. If you bring a background in military or corporate aviation and are ready to take on advanced projects, we encourage you to apply.

Key Responsibilities:

  • Perform general to complex maintenance tasks on aircraft and related systems
  • Install, remove, and repair components, panels, and sheet metal structures
  • Disassemble and inspect engines, parts, and systems for non-conformities
  • Rebuild or replace aircraft structures, including wings, fuselage, and hydraulic systems
  • Assemble electrical, mechanical, plumbing, and structural accessories
  • Conduct system servicing including crankcase flushing, brake checks, and greasing
  • Test engine and system operations using specialized equipment and sound detection
  • Interpret technical manuals, engineering drawings, and repair specifications
  • Align, calibrate, and adjust systems with hand tools and gauges
  • Support maintenance of shop tools, facility, and equipment
  • Work independently and provide support to less experienced technicians as needed

Qualifications:

  • High school diploma or GED required
  • Associate degree in Aviation Technology preferred
  • FAA A&P License required
  • Minimum of 1 year of current experience in corporate or military aircraft maintenance
  • Proficiency in basic computer applications
  • Familiarity with aviation software platforms (Corridor preferred)
  • Valid driver’s license required; passport preferred
  • Must pass pre-employment drug screening and comply with FAA-mandated drug and alcohol program
  • Strong attention to quality, safety, and detail
  • Must be reliable, self-motivated, and comfortable working in fast-paced settings
  • Willingness to work overtime and flexible shifts based on aircraft schedules

Physical Requirements:

  • Ability to lift up to 50 lbs
  • Routine walking, standing, bending, squatting, sitting, and stooping
  • Repetitive arm and hand movements required for manual tasks
  • Work in hangar environments with wide temperature variation

Benefits:

STS Technical Services offers a comprehensive benefits package that includes:

  • Medical, dental, vision, and life insurance
  • 401(k) with company match
  • Paid holidays and vacation time
  • Opportunities for long-term career advancement in aviation

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that partners with top aerospace and defense companies across the United States. We offer contract, direct hire, and project-based positions to skilled technicians and engineers. To learn more and apply, visit www.ststechnicaljobs.com.

#IndeedAM

Aircraft Structures Mechanics

|

30 September 2026

|
No comments

Aircraft Structures Mechanic Jobs in Rockford, Illinois

STS Technical Services is hiring Aircraft Structures Mechanics to support aircraft maintenance and modification operations in Oscoda, Michigan. This role is ideal for experienced sheet metal professionals who take pride in precision workmanship, structural integrity, and compliance with FAA standards.

If you have hands-on experience performing aircraft structural repairs and enjoy working in a fast-paced aviation environment, this is an opportunity to build long-term stability while working on complex aircraft structures.

Position Summary

The Aircraft Structures Mechanic is responsible for repairing, fabricating, modifying, and installing sheet metal parts, components, and assemblies on aircraft. This position requires a strong understanding of sheet metal materials, aviation repair techniques, shop mathematics, and the proper use of tools and equipment common to aircraft structures work.

Key Responsibilities

  • Shoot and buck rivets to specification in accordance with FAA guidelines
  • Identify and work with different aircraft metals based on structural strength and thickness
  • Perform sheet metal bends in accordance with standard aviation practices and specifications
  • Remove and replace existing rivets from aircraft structures
  • Fabricate aircraft components using various sheet metal materials
  • Make repair decisions and understand which repairs are allowable under FAA standards
  • Read and interpret blueprints, drawings, and technical documentation
  • Follow written and verbal work instructions accurately
  • Work with and around chemicals while adhering to OSHA requirements and PPE standards
  • Complete and maintain accurate job completion and maintenance documentation
  • Perform additional duties as assigned

Required Qualifications

  • Previous experience performing aircraft structural repairs
  • Wide-body aircraft experience preferred
  • Must provide own tools
  • Ability to use ERP systems, timekeeping software, and company intranet platforms
  • Strong time management skills with the ability to meet company priorities

Physical and Work Environment Requirements

  • Ability to crawl in and out of confined spaces
  • Ability to work in a prone position for extended periods exceeding four hours
  • Comfortable working at elevated heights of up to 40 feet
  • Ability to lift, balance, and carry up to 50 pounds
  • Ability to work in enclosed hangars and outdoor weather conditions
  • Comfortable working in close proximity to other personnel

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm partnered with leading organizations across aviation, aerospace, manufacturing, defense, and industrial industries. We connect skilled professionals with career opportunities at client sites throughout the United States.

To speak directly with a recruiting professional, call 1-800-359-4787.

STS Technical Services is an Equal Opportunity Employer.

#IndeedAM

Accessory Technician

|

28 September 2026

|
No comments

Technical Illustrator

STS Technical Services is hiring an Accessory Technician in Nashville, Tennessee, to support the testing, troubleshooting, repair and overhaul of aircraft components and accessories.

This position performs advanced electrical, hydraulic, avionic and electromechanical maintenance in accordance with FAA, FCC, OEM and company requirements. The Accessory Technician will work with navigation, radar, communication, instrumentation, hydraulic and landing gear systems while maintaining high standards for safety, quality and efficiency.

Position Overview

The Accessory Technician performs component maintenance, testing, troubleshooting, repair and overhaul work using approved procedures, technical documentation and test equipment.

The role includes hands-on work with avionics components and LRUs, electrical systems, wiring, circuit boards, wheels, brakes, landing gear and related aircraft accessories.

Responsibilities

  • Repair and overhaul aircraft components and accessories in accordance with FAA and OEM procedures
  • Ensure completed work meets prescribed standards and tolerances
  • Perform diagnostic, repair and overhaul tasks using approved procedures
  • Assist technicians and specialists with technically complex repairs
  • Follow applicable manual references and use the proper tools for each repair
  • Perform work involving wheels, landing gear and brake repairs
  • Follow established production schedules
  • Work with the Shop Lead and Production Maintenance Supervisor to address schedule delays
  • Follow work orders and repair orders
  • Ensure required documentation is completed accurately
  • Assist with maintenance records and technical data required by the FAA
  • Monitor and track parts shortages
  • Support material ordering to address parts shortages
  • Provide repair information to the Lead or Production Maintenance Supervisor for quotations
  • Create purchase requisitions for required parts and tooling
  • Communicate tooling requirements to the Lead or Production Maintenance Supervisor
  • Communicate by email, telephone and in person as required
  • Work with the Lead to coordinate third-party vendor tasks and services

Education and Experience

  • High school diploma or GED
  • At least two years of aircraft avionics maintenance experience
  • FAA A&P certification preferred
  • Experience troubleshooting avionics components and LRUs
  • Experience bench testing avionics components
  • Experience with communication, navigation and transponder systems preferred
  • Experience using avionics test benches or automated test equipment
  • Experience performing functional testing after repair or overhaul

Knowledge, Skills and Abilities

  • Ability to troubleshoot avionics systems
  • Ability to diagnose faults using test equipment and established troubleshooting procedures
  • Ability to read and interpret wiring diagrams and electronic schematics
  • Soldering and circuit board repair skills
  • Wire harness inspection and repair experience
  • Connector pin replacement experience
  • Electrical continuity and insulation testing experience
  • Experience using multimeters
  • Experience using oscilloscopes
  • Experience using avionics test equipment and test sets
  • Familiarity with CMM and repair station documentation
  • Experience using wire crimping tools and connector tooling

Working Conditions and Requirements

  • Ability to work safely and professionally while following applicable OSHA, EPA, state and federal regulations
  • Ability to wear a respirator when required in accordance with OSHA 29 CFR 1910.134 without restrictions that would prevent proper use or seal
  • Ability to obtain a SIDA badge may be a requirement for this position

General Expectations

  • Follow company values, department policies, directives and procedures
  • Incorporate Lean and P3E processes and concepts into daily work
  • Support continuous improvement of processes and procedures
  • Protect confidential and proprietary information
  • Meet established work schedule requirements
  • Perform additional duties as assigned

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have aircraft avionics maintenance experience and hands-on skills in component troubleshooting, bench testing and repair, apply today to join STS Technical Services as an Accessory Technician in Nashville, Tennessee.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Interiors Technicians

|

28 September 2026

|
No comments

Aircraft Interiors Technician Jobs

STS Technical Services is hiring Aircraft Interiors Technicians (Back Shop) in La Vergne, Tennessee.

Hiring Note: This position is will be working in our client’s Back Shop in La Vergne, TN.  First day of reporting and training will still be in Nashville and then you will go to La Vergne after that to work. 

Essential Duties & Responsibilities:

  • Perform Interior repair using fiberglass, bondo, two-part bonding, tedlar, interior composites, in a shop environment.
  • Repair or replace Galleys, Seats, Carpet, Lavatories, Overhead Bins, Windows, Trim, Moon Mats, Accessories.
  • Perform lay-ups
  • Fabricate parts as required and repair parts as needed using hand tools and power tools in a safe and efficient manner.
  • Test the performance and quality of installed items.
  • Keep records and ensure documentation is signed.

Qualifications:

  • Personal tools required.
  • US Drivers license.
  • Able to pass a background check and drug test.
  • Ability to obtain a SIDA badge may be a requirement for this position.

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Structures Technicians

|

28 September 2026

|
No comments

Aircraft Structures Technicians

STS Technical Services is hiring Aircraft Structures Technicians in Nashville, Tennessee. In this role, you’ll perform structural repairs and fabrication of aircraft parts, ensuring compliance with FAA standards and delivering safe, airworthy results.

Position Summary

Perform structural repairs and fabrication of parts with the ability to follow SRM instructions and/or engineering dispositions.

Duties & Responsibilities

  • Follow approved repair and modification procedures for components or aircraft, consulting FAA-approved procedures, OEM technical data, and work package instructions
  • Position and align subassemblies in jigs or fixtures using measuring instruments, blueprint lines, and index points
  • Inspect completed work to identify any needed rework before sign off; ensure all repairs meet prescribed standards and tolerances
  • Perform serviceability tests on repairs using test equipment outlined in technical manuals
  • Complete work package documentation by signing/stamping off after finishing all designated operations
  • Submit completed work to Quality Assurance for final inspection and re-certification of airworthiness
  • Fasten, support, or hang components and subassemblies using bolts, screws, or rivets
  • Cut, trim, and file parts; verify fitting tolerances before installation
  • Drill holes in structures and subassemblies; attach brackets, hinges, or clips to secure installation
  • Inspect and test installed units, parts, and equipment for compliance with performance and safety standards
  • Install units, parts, and components in structural assembly using hand and power tools
  • Locate and mark reference points for installation of parts using jigs, templates, and measuring instruments
  • Provide information and documentation for engineering requests
  • Comply with repair station procedures (RSM/QCM) and company policies (SOP) during all maintenance work

Qualifications

Education

  • High School Diploma / GED
  • A&P and/or structures experience preferred
  • Repairman’s certificate may substitute for A&P

Experience

  • Minimum of 5 years of experience preferred
  • Proven aircraft structures repair experience with the ability to use technical data and aircraft drawings to accomplish repairs

Knowledge, Skills & Abilities

  • Ability to fabricate parts and read work orders, blueprints, and specifications
  • Proficiency in the usage of air-powered hand tools and related equipment
  • Knowledge of machines, tools, raw materials, production processes, and quality control methods
  • Ability to work flexible hours and shifts as required
  • Strong understanding of FAA maintenance procedures and compliance requirements

Working Conditions / Special Requirements

  • Must adhere to OSHA, EPA, State, and Federal regulations at all times
  • Must be able to wear a respirator as per OSHA 29 CFR 1910.134 with no restrictions
  • Ability to work flexible hours and shifts
  • Subject to FAA-mandated random drug and alcohol testing
  • Ability to obtain a SIDA badge may be a requirement for this position
  • Must hold a valid driver’s license
  • Must be able to work indoors/outdoors in varying conditions
  • Physical requirements include:
  • Lift up to 50 lbs unassisted
  • Work above head level
  • Work at heights and in confined spaces
  • Climb as needed

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm partnered with some of the largest names in the aerospace, manufacturing, defense, and industrial industries.

Our recruitment teams connect skilled professionals with exciting career opportunities across the globe. If you’re ready to advance your career, apply today or call 1-800-359-4787 to speak directly with a Recruiting Professional.

STS Technical Services is an equal opportunity employer.

#IndeedAM

A&P Aircraft Mechanic

|

28 September 2026

|
No comments

STS Technical Services is hiring A&P Aircraft Mechanics in Peru, Indiana. This is an excellent opportunity to apply your skills and training while supporting aircraft maintenance operations in a professional and safety-focused environment.

Responsibilities of an Aircraft Mechanic

  • Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
  • Adhere to all applicable FARs and company policies and procedures outlined in the General Procedures Manual (GPM) and the FAA Approved Continuous Airworthiness Maintenance Program
  • Interpret aircraft technical manuals and electrical drawings
  • Responsible for movement of aircraft in hangar and on ramp, including operation of tow tractor
  • Maintain work area in a neat, clean, and safe condition at all times
  • Perform only those tasks for which proper training and qualification has been obtained
  • Document on-the-job training (OJT) on form (T#004) for training received on tasks not previously performed
  • Perform other duties as assigned

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with some of the largest names in the aerospace, manufacturing, defense, and industrial industries. Our professional recruitment teams put talented individuals to work at client locations all over the United States.

If you’re looking for work, we’re here to help.

#IndeedAM

Avionics Technicians

|

25 September 2026

|
No comments

Aircraft Avionics Technician Jobs in Melbourne, Florida

STS Technical Services is hiring Avionics Technicians in Nashville, Tennessee.

Job Description:

Performs avionics and electrical systems maintenance according to FCC, FAA and Company Policies and Regulations. Troubleshoots, tests, repairs and installs avionics components such as aircraft communication, navigation, radar and electronic instrument systems. Operates and maintains test equipment and trade associated tools.

Duties & Responsibilities:

  • Performs routine or special maintenance inspections to prevent failure of aircraft electrical and avionic systems and components; performs complete operational and functional checks on navigation, communication and flight control systems, including instrumentation and pilot static installations, etc.
  • Fabricates wiring harnesses, installs/modifies avionic and electrical systems.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme and quantity and type of parts needed to accomplish proper repair; secures same from Stores or departmental supplies.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer’s (OEM’s) technical data, and work package instructions.
  • Inspects completed work before sign off to identify any needed rework and performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping off after finishing all designated operations.
  • Performs installation of digital avionic equipment.
  • Interprets avionic/electrical wiring diagrams, wire identification, harness fabrication, wiring and cable integrity, coax cables and fittings and connector assemblies.
  • Adjusts, repairs, or replaces malfunctioning components or assemblies, using hand tools and soldering iron.
  • Installs electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, and soldering iron.
  • Interprets flight test data to diagnose malfunctions and systemic performance problems.
  • Sets up and operates ground support and test equipment to perform functional flight test of electrical and electronic systems.
  • Tests components or assemblies, using circuit tester, oscilloscope, and voltmeter.
  • Troubleshoots, repairs, reworks, and modifies worn or defective assemblies, components or systems.

Qualifications:

Education:

  • High School/ GED

Experience:

  • 2 years actual and recent depot level aircraft avionics experience is required, (repair of electrical systems, flight control systems, instrumentation and wiring); proficiency with: interpretation of avionic/electrical wiring diagrams, wire identification, harness fabrication, cables, fittings, circuits and connectors
  • Desired:Prior experience in executive jet repair facility.

Knowledge, Skills & Abilities:

  • Assignments require Comprehensive Knowledge of all possible tasks and responsibilities within their Technical Area.
  • Troubleshooting — determining causes of operating errors and deciding what to do about it.
  • Installation — Installing equipment, machines, wiring, or programs to meet specifications.
  • Repairing — Repairing machines or systems using the needed tools.
  • Equipment Selection — determining the kind of tools and equipment needed to do a job.
  • Equipment Maintenance — performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
  • Knowledge of machines and tools, including their uses, repairs and maintenance.
  • Knowledge of FAA requirements for aircraft maintenance procedures
  • Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.

Working Conditions / Environment / Special Requirements:

Ability to obtain a SIDA badge may be a requirement for this position

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Director of Aircraft Maintenance Operations

|

24 September 2026

|
No comments

Production Assistant Jobs in Manchester, United Kingdom

STS Technical Services is hiring a Director of Aircraft Maintenance Operations in Oscoda, Michigan. This is a direct-hire, full-time leadership opportunity overseeing aircraft engine maintenance, production and materials operations.

The Director of Aircraft Maintenance Operations will be responsible for ensuring safe, efficient and high-quality operations while meeting customer requirements, FAA regulations and company standards. This role requires extensive aircraft engine maintenance experience, strong operational leadership and a proven ability to manage production, staffing, quality and delivery performance.

Position Details

  • Job Title: Director of Aircraft Maintenance Operations
  • Location: Oscoda, Michigan
  • Employment Type: Direct Hire
  • Schedule: Full-Time
  • Compensation: Competitive salaried compensation based on experience and qualifications

Position Overview

The Director of Aircraft Maintenance Operations will oversee daily engine maintenance, production, stockroom and materials operations while providing leadership across multiple functional teams.

This position is responsible for coordinating maintenance and production planning, monitoring engine and component repair progress, supporting workforce development and driving continuous improvement across quality, safety, cost, productivity and on-time delivery.

Responsibilities

  • Oversee daily operations for engine maintenance, production, stockroom and materials departments
  • Lead and support department personnel through training, development, performance management and staffing activities
  • Coordinate maintenance and production planning activities to maintain productivity and meet delivery goals
  • Ensure appropriate staffing, training, equipment and materials are available to support operational requirements
  • Drive continuous improvement in quality, safety, cost, productivity and on-time delivery
  • Ensure maintenance documentation and required entries are completed accurately and in accordance with applicable regulations
  • Monitor engine and component repair progress
  • Track work-in-process status and cycle times
  • Monitor financial performance related to operations
  • Communicate with customers regarding repair status, labor hours, progress and discrepancies
  • Conduct production and materials meetings
  • Provide operational leadership and guidance to department teams
  • Ensure facilities, tools and equipment are properly maintained
  • Ensure established safety standards are consistently followed
  • Work closely with Shift Leads and provide operational support during off-shift hours as needed
  • Participate in hiring, employee evaluations, training and disciplinary actions in accordance with company policies
  • Perform additional duties as assigned by the Accountable Manager

Qualifications

  • High school diploma or GED
  • At least 10 years of aircraft engine maintenance experience
  • At least five years of supervisory experience or demonstrated experience managing inspection and/or production operations
  • Valid FAA A&P or Powerplant certification
  • Strong knowledge of aircraft engine production
  • Strong understanding of applicable FAA regulations
  • Ability to read and interpret technical documents
  • Ability to read and interpret maintenance, safety and procedural documentation
  • Strong leadership and communication skills
  • Strong organizational and problem-solving abilities
  • Ability to work effectively independently and as part of a team
  • Ability to remain calm and respond quickly in time-sensitive situations
  • Proficiency with Microsoft Outlook
  • Proficiency with Microsoft Word
  • Proficiency with Microsoft Excel
  • Ability to read, write and speak English fluently

Additional Requirements

  • Ability to travel on short notice for line maintenance, aircraft recovery or repair assignments
  • Ability to support overnight and potentially extended travel assignments
  • Valid driver’s license required
  • Valid passport required within 90 days of hire
  • Ability to operate company vehicles and equipment
  • Ability to maintain required tools for the position
  • Successful completion of required TSA Security Training
  • Successful completion of FAA Drug & Alcohol screening
  • Ability to meet applicable TSA and FAA security requirements
  • Ability to complete CHRC and/or STA requirements as applicable

Compensation & Benefits

Competitive salaried compensation is offered based on experience and qualifications.

Benefits include:

  • 401(k) with employer match
  • Health insurance
  • Dental insurance
  • Vision insurance
  • Paid time off
  • Paid holidays
  • Paid parental leave
  • Life insurance
  • Short-term disability
  • Long-term disability
  • HSA and FSA options
  • Employee Assistance and Wellness Programs
  • Tuition reimbursement
  • Employee recognition programs
  • Additional bonus, differential, trip and overtime opportunities as applicable

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have extensive aircraft engine maintenance experience, a strong background in operational leadership and the ability to manage complex maintenance and production environments, apply today for this direct-hire Director of Aircraft Maintenance Operations position in Oscoda, Michigan.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Sheetmetal Assembly Mechanic

|

22 September 2026

|
No comments

Aircraft Sheetmetal Assembly Mechanic Job in Stuart, Florida STS Technical Services

STS Technical Services is hiring Aircraft Sheetmetal Assembly Mechanics in Stuart, Florida to join a premier aerospace manufacturing team assembling advanced aircraft such as the Boeing 767 and KC-46 tankers. If you’re an experienced structural assembler with a passion for precision and aircraft excellence, this is your opportunity to make a real impact.

Key Responsibilities:

  • Perform complex structural assembly, including drilling, fitting, and fastening of aircraft components using engineering drawings and specifications
  • Assemble, modify, and install aircraft sheet metal and composite structures with accuracy and structural integrity
  • Interpret blueprints, work instructions, and engineering documentation to complete precise assemblies
  • Inspect work for proper fastener installation, alignment, and overall quality
  • Document work performed and maintain production accountability
  • Ensure compliance with safety protocols, company standards, and FAA regulations

Required Qualifications:

  • Minimum of 5+ years of hands-on aircraft structural assembly or sheet metal mechanic experience
  • High school diploma or GED required
  • Must be able to read and interpret blueprints and technical documentation in English
  • Ability to use a variety of hand and power tools specific to aircraft sheet metal work
  • Open to working all shifts, including weekends and overtime as required
  • Must be willing to relocate to or commute within the Stuart, Florida area prior to start

Why You Should Apply:

  • Join a fast-growing aerospace manufacturer on high-profile aircraft programs
  • Work in a climate known for its beaches, beauty, and aviation excellence
  • Gain hands-on experience with advanced aircraft platforms in a highly supportive and skilled team environment

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that partners with the largest names in the aerospace, defense, manufacturing, and industrial sectors. We specialize in helping aviation professionals find rewarding careers across North America.

To learn more about this position or to apply online, visit www.ststechnicaljobs.com or call 1-800-359-4787.

#IndeedAM