Archive

Aircraft Structures Technician (Licensed)

|

7 November 2025

|
No comments

Aircraft Structures Technician Job in Melbourne, Florida STS Aviation Services

STS Technical Services is hiring an Aircraft Structures Technician (Licensed) in Waco, Texas.

This role is ideal for experienced sheet metal professionals who take pride in precision, craftsmanship, and safety. You’ll perform structural maintenance and repairs on a variety of fixed-wing aircraft, ensuring compliance with FAA regulations and maintaining the highest standards of airworthiness.

Key Responsibilities

  • Perform aircraft structural maintenance, repair, and modification on components such as skins, frames, floor beams, and fittings.
  • Fabricate, assemble, and install sheet metal parts and assemblies using proper materials, layout techniques, and equipment.
  • Read and interpret blueprints, sketches, and technical manuals to determine accurate repair methods and sequences.
  • Select appropriate materials, including aluminum, steel, stainless steel, plastics, and fiberglass, per manufacturer and FAA standards.
  • Use precision measuring tools such as calipers, dividers, and rulers to mark and develop patterns for repair or fabrication.
  • Document all work performed, including logbook entries, removal logs, and part routing tags, to ensure traceability and compliance.
  • Perform inspections to verify quality, functionality, and regulatory compliance.
  • Maintain a clean, safe, and organized work area while supporting facility maintenance as needed.
  • Participate in the FAA/DOT drug and alcohol testing program as required.

Qualifications & Experience

  • Valid Airframe & Powerplant (A&P) Certificate or Repairman Certificate under FAR Part 65 required.
  • 10–15 years of aircraft structural repair experience preferred.
  • Strong understanding of aircraft materials, structures, and repair procedures.
  • Skilled in the use of rivet guns, drills, and sheet metal forming tools.
  • Hands-on experience with Boeing (737, 747, 767) and/or Airbus (A330, A340) platforms preferred.
  • Strong knowledge of FAA regulations, repair manuals, and quality assurance standards.
  • Ability to read, write, and communicate effectively in English (Spanish a plus).
  • Must pass a pre-employment drug screen and background check.

Additional Information

  • Competitive pay based on experience.
  • Full-time position with comprehensive benefits.
  • Opportunities for overtime and career advancement.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with the biggest names in aerospace, manufacturing, defense, and industrial industries. We connect skilled professionals with rewarding career opportunities nationwide.

If you’re ready to bring your expertise to a team that values precision, safety, and integrity, apply today or call 1-800-359-4787 to speak with a recruiter.

STS Technical Services is an equal opportunity employer.

Sheet Metal Mechanic

|

4 November 2025

|
No comments

Aircraft Sheet Metal Mechanic Jobs

Location: Manchester Airport, Manchester, United Kingdom
Company: STS Aviation Services

STS Aviation Services are rapidly growing and we are looking for six experienced Sheet Metal Mechanics to be part of our journey as the leading UK MRO. If you want to be part of the next chapter of our journey playing a key role at our Manchester Hangar then we’d love to hear from you.

Want a change from the norm? Then why not get involved with the transformation of the largest, current passenger production airliner, and convert it into a world class, market leading Air Freighter! In the B777 `Passenger to Freighter` project at Manchester.

Responsibilities:

All aspects of major structural repair and modifications to include but not limited to:

  • Removal of major aircraft structural sections, whilst stress jacked.
  • Working to fine tolerances and high standards.
  • Upholding high standards of housekeeping.
  • Adhering to company and manufacturers procedures.
  • Implementing modifications from drawings and procedures.

Qualifications & Experience:

  • Completed aircraft engineering apprenticeship, production or Live aircraft.
  • Ideally 5 years live aircraft and structures experience.
  • Demonstratable experience in aircraft modification/production environment
  • Experience of implementing and carrying out aircraft component modifications.
  • Experienced and capable of reading manufacturers drawings and SRMs.
  • Excellent hand skills
  • Takes full ownership and responsibility for own tasks.
  • Good organisational skills.
  • Good communicator.
  • Knowledge of MS Office applications.
  • Eligible to work in the UK.

Why STS Aviation Services?

STS Aviation Services is committed to building a future-focused team that values craftsmanship, teamwork, and opportunity. Our Manchester hangar is at the heart of one of the most innovative aircraft conversions in the industry, offering a unique chance to work on high-profile projects that shape the future of aviation.

Ready to apply? Submit your CV today and join a team that’s redefining excellence in aircraft maintenance and modification.

About STS Aviation Services:

STS Aviation Services is the aircraft maintenance, repair and overhaul division of STS Aviation Group. With state-of-the-art facilities across the UK and Europe, we provide comprehensive MRO solutions to commercial and defence operators. From line and base maintenance to complex structural repairs and modifications, we are driven by safety, reliability and performance.

#IndeedUK

Aircraft Structures Technicians

|

3 November 2025

|
No comments

Aircraft Structures Technicians

STS Technical Services is hiring Aircraft Structures Technicians in Nashville, Tennessee. In this role, you’ll perform structural repairs and fabrication of aircraft parts, ensuring compliance with FAA standards and delivering safe, airworthy results.

Position Summary

Perform structural repairs and fabrication of parts with the ability to follow SRM instructions and/or engineering dispositions.

Duties & Responsibilities

  • Follow approved repair and modification procedures for components or aircraft, consulting FAA-approved procedures, OEM technical data, and work package instructions
  • Position and align subassemblies in jigs or fixtures using measuring instruments, blueprint lines, and index points
  • Inspect completed work to identify any needed rework before sign off; ensure all repairs meet prescribed standards and tolerances
  • Perform serviceability tests on repairs using test equipment outlined in technical manuals
  • Complete work package documentation by signing/stamping off after finishing all designated operations
  • Submit completed work to Quality Assurance for final inspection and re-certification of airworthiness
  • Fasten, support, or hang components and subassemblies using bolts, screws, or rivets
  • Cut, trim, and file parts; verify fitting tolerances before installation
  • Drill holes in structures and subassemblies; attach brackets, hinges, or clips to secure installation
  • Inspect and test installed units, parts, and equipment for compliance with performance and safety standards
  • Install units, parts, and components in structural assembly using hand and power tools
  • Locate and mark reference points for installation of parts using jigs, templates, and measuring instruments
  • Provide information and documentation for engineering requests
  • Comply with repair station procedures (RSM/QCM) and company policies (SOP) during all maintenance work

Qualifications

Education

  • High School Diploma / GED
  • A&P and/or structures experience preferred
  • Repairman’s certificate may substitute for A&P

Experience

  • Minimum of 5 years of experience preferred
  • Proven aircraft structures repair experience with the ability to use technical data and aircraft drawings to accomplish repairs

Knowledge, Skills & Abilities

  • Ability to fabricate parts and read work orders, blueprints, and specifications
  • Proficiency in the usage of air-powered hand tools and related equipment
  • Knowledge of machines, tools, raw materials, production processes, and quality control methods
  • Ability to work flexible hours and shifts as required
  • Strong understanding of FAA maintenance procedures and compliance requirements

Working Conditions / Special Requirements

  • Must adhere to OSHA, EPA, State, and Federal regulations at all times
  • Must be able to wear a respirator as per OSHA 29 CFR 1910.134 with no restrictions
  • Ability to work flexible hours and shifts
  • Subject to FAA-mandated random drug and alcohol testing
  • Must hold a valid driver’s license
  • Must be able to work indoors/outdoors in varying conditions
  • Physical requirements include:
  • Lift up to 50 lbs unassisted
  • Work above head level
  • Work at heights and in confined spaces
  • Climb as needed

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm partnered with some of the largest names in the aerospace, manufacturing, defense, and industrial industries.

Our recruitment teams connect skilled professionals with exciting career opportunities across the globe. If you’re ready to advance your career, apply today or call 1-800-359-4787 to speak directly with a Recruiting Professional.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Structures Technicians

|

3 November 2025

|
No comments

Aircraft Structures Technicians

STS Technical Services is hiring Aircraft Structures Technicians in Macon, Georgia.

Position Summary:

Performs structural repairs and fabrication of parts.  Ability to perform repairs per aircraft SRM and/or engineering dispositions.

Duties & Responsibilities:

  • Follows approved repair/modification procedures for component or aircraft, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
  • Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points
  • Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repairs using test equipment specified in technical manuals.
  • Completes work package documentation by signing/stamping off after finishing all designated operations.
  • Submits completed work to Quality Assurance for final/in progress inspection and recertification of airworthiness.
  • Bolts, screws, or rivets accessories to fasten, support, or hang components and subassemblies.
  • Cuts, trims, and files parts, and verifies fitting tolerances to prepare for installation.
  • Drills holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies.
  • Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
  • Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
  • Able to identify bolts, screws, rivets and various fasteners used to support or assemble components.
  • Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
  • Locates and marks reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
  • Provide information and documentation for engineering requests.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Qualifications:

Education:

  • High School/ GED
  • A&P license preferred

Experience:

  • Prefer at least 5 years experience.
  • Experience doing aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.

Knowledge, Skills & Abilities:

  • Must be able to fabricate parts.
  • Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
  • Repair body or structure of aircraft according to specifications.
  • Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
  • Be proficient in the usage of air powered hand tools and related equipment.
  • Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
  • Ability to work different shifts and flexible hours if required.
  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.

Working Conditions / Environment / Special Requirements:

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Ability to work flexible hours and different shifts if required.
  • Employees will be subject to the random drug and alcohol testing under FAA regulations.
  • Valid Drivers License.
  • Must be able to work in hot/Cold – Indoor/Outdoor.
  • Must be able to lift up to 50 lbs unassisted.
  • Must be able to do work above head.
  • Must be able to work at heights.
  • Must be able to work in confined spaces.
  • Must be able to climb.

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Sheet Metal Technicians (Backshop)

|

3 November 2025

|
No comments

Sheet Metal Technician Jobs in Nevada

STS Technical Services is hiring Sheet Metal Technicians (Backshop) in Cedar Hill, Texas. 

Position Overview:

Maintain, repair, modify, fabricate, and installation of parts, items, and assemblies of structural components using current technical data such as blue prints or manufacturers drawings/manuals.  Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft repair.  Performs repairs with varying sheet metal types, and thicknesses.  Remove and replace of various fastener types such as solid rivets, blind rivet, HI-Loc, etc.

Duties & Responsibilities:                            

  • Must have ability to read and follow all work instructions, as well as properly document work performed using documents such as process planning, adhesive log sheets, Material Review Board/Engineering Work Orders (MRB/EWO’s), Process Specifications, Original Equipment Manufacturer (OEM) Manuals, etc.
  • Must be able to read basic blueprints
  • Must be able to use close tolerance measuring tools (i.e., scales, micrometers, calipers, depth gages, etc.).
  • Must be able to use hand tools (i.e., drill motors, die grinders, rivet guns, fastener installation tools, etc.).
  • Must have ability to perform alignment/assembly using jig, templates and fixtures.
  • Must be able to perform trimming burring, countersinking, riveting, drilling and reaming to blueprint specified tolerance.

Minimum Qualifications:

  • Experience performing mechanical assembly in an aircraft, automotive, or similar environment is preferred.
  • High school diploma, GED equivalent
  • Able to stand, kneel, bend, and lift heavy objects (50 lbs.), for extended periods of time.

Statements included in this job description do not necessarily represent an exhaustive list of all responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed as circumstances change.

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Structures Technician

|

29 October 2025

|
No comments

Aircraft Structures Technicians

STS Technical Services is hiring experienced Aircraft Structures Technicians to join a respected aviation team in Moline, Illinois. This is a hands-on position focused on inspecting, servicing, repairing, and modifying aircraft airframes, structural systems, and composite components.

Position Summary:

As an Aircraft Structures Technician, you’ll play a critical role in maintaining the structural integrity of aircraft. You will support repair and modification projects, read and interpret aircraft blueprints, and ensure all work complies with FAA regulations and company quality standards.

Key Responsibilities:

  • Perform structural repairs and modifications on aircraft and components
  • Interpret technical drawings and blueprints for structural work
  • Take full ownership of assigned structural projects and deliver quality results
  • Ensure compliance with the Quality Control Manual and FAA regulations
  • Maintain detailed documentation of all work performed
  • Keep work areas clean, organized, and in compliance with safety regulations
  • Safeguard customer aircraft, components, and parts at all times
  • Comply with all Federal, OSHA, state, and local safety and environmental regulations
  • Perform additional duties as required

Required Qualifications:

  • High school diploma or equivalent required
  • Airframe & Powerplant Certificate preferred (Airframe-only also accepted)
  • 3–5 years of aircraft maintenance experience with a focus on structural repair and modification
  • King Air and/or Citation aircraft experience preferred.
  • Demonstrated experience with flight control surface repairs
  • Ability to obtain and maintain airport security clearance (AOA badge)
  • Strong working knowledge of FARs 43, 65, 91, 135, and 145

Why Join STS Technical Services?

STS Technical Services is a Top 100 Staffing Firm that partners with some of the largest names in aerospace, aviation maintenance, defense, and manufacturing. We connect skilled professionals with rewarding opportunities across the United States. Our dedicated recruitment team supports you from day one to ensure a smooth hiring experience and long-term success.

#IndeedAM

Sheet Metal Mechanic

|

28 October 2025

|
No comments

Junior Compliance Engineer

Location: Birmingham, United Kingdom
Company: STS Aviation Services

Note: All applicants must be authorised to work in the United Kingdom for any employer.

STS Aviation Services is hiring a B1 Structures Technician in Birmingham, United Kingdom.

In this role, you will carry out structural modifications and maintenance in line with approved documentation and quality standards. You’ll take full ownership of the work performed, ensuring accuracy and compliance throughout. Tasks will be assigned by a Lead Technician or B1 Engineer, and you’ll be expected to raise any issues, risks, or unsafe conditions that may impact programme execution.

Key Duties & Responsibilities:

  • Complete strip/removal of major structural aircraft equipment
  • Interpret technical manuals, technical drawings, and regulatory requirements
  • Installation of complex structural assemblies
  • Working to fine tolerances and high standards
  • Use sealants, various fasteners, bonding techniques as per technical standards
  • Maintain the highest standards of tool control within the work area
  • Maintain a safe and clean working environment

Skills and Abilities:

  • Completed an engineering apprenticeship—ideally in Aeronautical engineering or military equivalent
  • Ideally 2 years live aircraft sheet metal/structural experience
  • Previous aircraft production experience
  • Previous aircraft modification experience is advantageous
  • Excellent hand skills
  • Attention to detail
  • Eligible to work and live in the UK
  • Subject to UK security Vetting
  • Excellent knowledge of airframes
  • Reliability
  • Adaptability
  • Good interpersonal skills

Part-145 Training Requirements:

  • Initial Human Factors; Continuation Training Human Factors
  • Initial SFAR phase 1&2; Continuation Training SFAR phase 1&2
  • Initial EWIS group 1&2; Continuation Training EWIS group 1&2
  • ETOPS
  • RVSM

About STS Aviation Services:

STS Aviation Services is the UK’s leading independent MRO provider. With state-of-the-art facilities in Birmingham, Manchester, Newquay, and Belfast, we offer base maintenance, line maintenance, modification, and aircraft engineering support across the commercial and defence sectors. Our teams solve complex challenges every day — and we take pride in doing it right the first time.

When you join STS Aviation Services, you join a group of professionals dedicated to safety, service, and success. We’re growing fast and looking for people who want to grow with us.

#IndeedUK

Aircraft Sheetmetal Assembly Mechanic

|

10 October 2025

|
No comments

Aircraft Sheetmetal Assembly Mechanic Job in Stuart, Florida STS Technical Services

Location: Stuart, Florida
Industry: Aerospace / Aircraft Manufacturing
Employment Type: Full-Time
Company: STS Technical Services

STS Technical Services is hiring Aircraft Sheetmetal Assembly Mechanics in Stuart, Florida to join a premier aerospace manufacturing team assembling advanced aircraft such as the Boeing 767 and KC-46 tankers. If you’re an experienced structural assembler with a passion for precision and aircraft excellence, this is your opportunity to make a real impact.

Key Responsibilities:

  • Perform complex structural assembly, including drilling, fitting, and fastening of aircraft components using engineering drawings and specifications
  • Assemble, modify, and install aircraft sheet metal and composite structures with accuracy and structural integrity
  • Interpret blueprints, work instructions, and engineering documentation to complete precise assemblies
  • Inspect work for proper fastener installation, alignment, and overall quality
  • Document work performed and maintain production accountability
  • Ensure compliance with safety protocols, company standards, and FAA regulations

Required Qualifications:

  • Minimum of 3+ years of hands-on aircraft structural assembly or sheet metal mechanic experience
  • High school diploma or GED required
  • Must be able to read and interpret blueprints and technical documentation in English
  • Ability to use a variety of hand and power tools specific to aircraft sheet metal work
  • Open to working all shifts, including weekends and overtime as required
  • Must be willing to relocate to or commute within the Stuart, Florida area prior to start

Why You Should Apply:

  • Join a fast-growing aerospace manufacturer on high-profile aircraft programs
  • Work in a climate known for its beaches, beauty, and aviation excellence
  • Gain hands-on experience with advanced aircraft platforms in a highly supportive and skilled team environment

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that partners with the largest names in the aerospace, defense, manufacturing, and industrial sectors. We specialize in helping aviation professionals find rewarding careers across North America.

To learn more about this position or to apply online, visit www.ststechnicaljobs.com or call 1-800-359-4787.

#IndeedAM

Structures Technician

|

3 October 2025

|
No comments

Aircraft Structures Technician Job in Melbourne, Florida STS Aviation Services

STS Aviation Services is hiring Aircraft Structures Technicians in Melbourne, Florida. This role focuses on heavy sheet metal modifications and installations, including WiFi systems, winglets, interiors, and avionics.

Hiring Note: Applicants must be authorized to work in the United States.

Position Summary

As an Aircraft Structures Technician, you will perform complex structural work on commercial and large regional aircraft. Candidates must bring strong modification experience and be prepared to pass both written and hands-on assessments to demonstrate technical skills.

Responsibilities

  • Perform structural modifications including WiFi installations, winglet installations, interior modifications, and avionics system modifications and installations
  • Work on A220, A320, 737 and ERJ-175 aircraft
  • Ensure work is completed to the highest safety and quality standards
  • Follow all regulatory, company, and airport procedures while maintaining a clean and safe work environment

Qualifications

  • 3+ years of experience performing heavy structural modifications on commercial or large regional aircraft required
  • FAA Airframe & Powerplant (A&P) license strongly preferred but not required
  • Must provide a complete set of basic hand tools to perform job duties
  • Must successfully pass a written and hands-on assessment test
  • Valid and current driver’s license required
  • Ability to obtain and maintain airport security badge
  • Must be able to work any shift or schedule as required

Pay and Schedule

  • These positions offer highly competitive pay, structured as a piece rate per aircraft.
  • Compensation will vary by project, depending on the type of installation or modification performed.

About STS Aviation Services

STS Aviation Services is the aircraft maintenance, repair, and overhaul (MRO) division of STS Aviation Group. With facilities in the United States, United Kingdom, and Ireland, STS Aviation Services provides global MRO solutions to keep aircraft flying safely and reliably. Our teams deliver excellence across base maintenance, line maintenance, modifications, and engineering services.

STS Aviation Services is an equal opportunity employer.

#IndeedAM

Aircraft Structures Mechanic

|

29 September 2025

|
No comments

Aircraft Structures Mechanic Jobs in Rockford, Illinois

Location: Broomfield, Colorado
Employment Type: Long-term contract with direct-hire potential

STS Technical Services is hiring Aircraft Structures Technicians to join the team in Broomfield, Colorado.

This is hands-on, high-impact work. You’ll perform complex fabrication and mechanical installations on Pilatus aircraft platforms. You’ll follow strict FAA and SRM guidelines. And you’ll do it alongside a team that values precision, safety, and craftsmanship.

If you’re an experienced airframe technician who takes pride in the details, this is your next opportunity.

What You’ll Be Doing:

  • Fabricate, install, and repair sheet metal and structural assemblies using SRMs and engineering drawings
  • Interpret technical manuals and blueprints to plan and execute accurate structural modifications
  • Locate components using station, butt-line, and waterline references
  • Accurately complete work order entries and technical documentation
  • Ensure all work complies with FAA, FOCA, and internal quality standards
  • Maintain a clean and safe workspace
  • Perform other tasks as assigned by leadership

What We’re Looking For:

  • High school diploma or equivalent
  • 3 to 5 years of structural experience
  • Strong working knowledge of aluminum part painting and corrosion prevention
  • Ability to read and interpret complex drawings and wiring diagrams
  • Physically capable of lifting up to 40 lbs and working in tight spaces
  • Proficient in Microsoft Word, Excel, and Outlook
  • Must meet ITAR “U.S. person” requirements (22 CFR 120.62)

Why STS?

At STS Technical Services, we put people first because great work starts with great talent. You’ll have access to dedicated support, weekly pay, and a team that values your skills and career goals. Whether you’re on assignment for a month or a year, you’ll be treated like family.

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that partners with some of the largest names in aviation, aerospace, manufacturing, and defense. We put talented people to work at client locations all over the world. If you’re ready to make your next move, we’re ready to help.

#IndeedAM