Archive

CNC Operator

|

17 August 2026

|
No comments

CNC Operator Jobs

STS Technical Services is hiring a CNC Operator in West Point, Mississippi, to support precision metal cutting and fabrication operations in a manufacturing environment.

This role is responsible for setting up and operating CNC equipment, loading programs, verifying cut quality, inspecting finished parts and maintaining production accuracy in accordance with engineering drawings, work orders and Quality Management System requirements.

Position Overview

The CNC Operator supports daily production by safely operating computer-numerically controlled cutting equipment used to produce precision metal components.

This position requires hands-on CNC experience, the ability to read engineering drawings and GD&T callouts, familiarity with G-code and a strong understanding of material handling, inspection, preventive maintenance and shop safety.

Machine Setup and Operation

  • Set up and operate CNC equipment according to daily work orders and router packages
  • Load and interpret CNC programs using G-code or machine-native formats
  • Make minor program edits as authorized
  • Select and install the correct consumables based on material type and thickness
  • Install tips, electrodes, shields and swirl rings as required
  • Set plasma cutting parameters, including amperage, cut speed, pierce delay and gas pressure
  • Nest parts using CAM or nesting software to maximize material utilization and reduce scrap
  • Perform test cuts before beginning full production runs
  • Verify dimensional accuracy before releasing parts for production

Quality and Inspection

  • Perform in-process inspections using calipers, squares and tape measures
  • Verify part dimensions against engineering requirements
  • Read and interpret engineering drawings
  • Interpret GD&T callouts and cut-to-size specifications
  • Identify, tag and segregate nonconforming material
  • Initiate nonconformance documentation when required
  • Maintain first-article documentation
  • Complete traveler sign-offs according to QMS procedures
  • Monitor cut quality, including dross, bevel angle, kerf width and surface condition

Material Handling

  • Stage plate, sheet and structural material at the machine
  • Use overhead cranes, forklifts or manual handling methods as required
  • Verify material certifications before cutting
  • Confirm heat and lot traceability
  • Label, handle and store completed parts to protect them from damage
  • Maintain part identification throughout production
  • Return and properly store remnant material
  • Update material inventory when required

Preventive Maintenance and Housekeeping

  • Perform daily pre-shift machine inspections
  • Check water table levels
  • Maintain clean machine rails
  • Verify Z-axis calibration
  • Inspect consumable condition
  • Remove slag, spatter and water table debris according to preventive maintenance schedules
  • Lubricate drive components as required
  • Check drive system alignment according to OEM maintenance schedules
  • Record machine downtime
  • Track consumable usage
  • Document maintenance activities
  • Maintain a clean and organized work area in accordance with 5S standards

Safety Responsibilities

  • Follow all Lockout/Tagout procedures before maintenance or consumable changes
  • Wear required personal protective equipment
  • Maintain proper ventilation and fume extraction during cutting operations
  • Report unsafe conditions immediately
  • Report near misses and workplace incidents to supervision
  • Follow all established shop safety requirements

Minimum Qualifications

  • High school diploma or GED
  • At least two years of hands-on CNC experience in a manufacturing environment
  • Ability to read and interpret engineering drawings
  • Ability to read material certifications
  • Basic math skills involving fractions, decimals and measurement conversions
  • Proficiency using calipers, tape measures and combination squares
  • Ability to safely operate an overhead crane and/or forklift
  • Ability to obtain required equipment certification if not already certified

Preferred Qualifications

  • Technical or vocational training in welding, machining or fabrication
  • Experience using nesting software such as Hypertherm ProNest, SigmaNEST or equivalent
  • Familiarity with Hypertherm plasma cutting systems
  • Familiarity with Lincoln Electric plasma cutting systems
  • Familiarity with ESAB plasma cutting systems
  • Experience working in defense, aerospace or ISO 9001-certified manufacturing environments
  • Knowledge of mild steel, stainless steel, aluminum and high-strength steel alloys
  • Familiarity with basic G-code editing
  • Familiarity with CNC controller interfaces such as Burny, Hypertherm Phoenix or similar systems
  • Overhead crane or forklift certification

Physical Requirements

  • Ability to frequently lift and carry up to 50 pounds
  • Ability to occasionally lift or move 51 to 100 pounds with assistance or equipment
  • Ability to stand and walk on concrete flooring throughout the shift
  • Ability to frequently bend, stoop and reach
  • Ability to work around heat, noise and fumes
  • Manual dexterity required for precise machine adjustments

Work Environment

This position operates in a manufacturing shop environment with exposure to metal fumes, UV and IR arc light, elevated noise levels and hot work surfaces.

Temperatures may vary seasonally. Required personal protective equipment must be worn while working on the shop floor.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have CNC cutting experience and are ready to support precision metal fabrication operations, apply today to join STS Technical Services as a CNC Operator in West Point, Mississippi.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedSTS

Armored Multi-Purpose Vehicle Field Services Technician

|

17 August 2026

|
No comments

Armored Multi-Purpose Vehicle Field Services Technician Job in Anniston, AL STS Technical Services

STS Technical Services is seeking a highly skilled Armored Multi-Purpose Vehicle (AMPV) Field Services Technician for our client’s Anniston, Alabama location. This role requires an expert with extensive knowledge of the AMPV, including mechanical systems, air conditioning systems, hydraulic systems, electrical power management, automotive systems, fire control, weapons systems, remote weapons firing systems, and other subsystems. The ideal candidate will possess the ability to identify and troubleshoot faults, provide leadership and direction to field service teams, and train maintenance and administrative support personnel.

Key Responsibilities:

  • Travel to Military Bases: Conduct vehicle upgrades, modifications, inspections, repairs, services, and maintenance.
  • Technical Guidance: Provide expert technical guidance to internal and external customers.
  • Training: Train soldiers and support personnel on AMPV systems and maintenance.
  • Data Management: Record and communicate complex field data to management.
  • Communication: Ensure effective communication with government and military personnel at all ranks.
  • Judgment: Exercise discretion and independent judgment in all tasks.
  • Relationship Building: Develop and maintain professional relationships with customers and colleagues.
  • Decision Making: Use sound judgment to make decisions while adhering to policies, procedures, and applicable laws and regulations.

Required Skills:

  • US Army Maintenance System Proficiency: Familiarity with US Army Maintenance system or Dealer Management Systems.
  • Technical Interpretation: Ability to interpret and use engineering drawings, schematics, diagrams, and specification sheets.
  • Work Instructions: Competence in reading, understanding, and following technical work instructions and modification work orders (MWOs).
  • Computer Skills: Proficiency with computers for report writing, data management, and word processing.
  • Tools and Equipment: Skilled in using hand and power tools, oscilloscopes, digital volt and ohm meters, diagnostic computers/software, lifting devices, and support equipment.
  • Diagnostic Equipment: Familiarity with Test Measurement and Diagnostic Equipment (TMDE) for automotive, electrical, electronic, and fire control systems.
  • Self-Motivation: Ability to work with minimal supervision.
  • Troubleshooting Expertise: Expertise in troubleshooting and repairing military track vehicles and power plants.
  • Organizational Skills: Strong planning, time management, and organization skills.
  • Interpersonal Skills: Excellent interpersonal skills for interfacing, coordinating, and negotiating with personnel, customers, and suppliers.
  • Analytical Skills: Analytical skills to analyze and perform repairs.
  • Communication Skills: Strong communication skills to serve as a point of contact, resolve conflicts, and effectively communicate both orally and in writing.

Preferred Skills:

  • Military Occupational Specialty (MOS): Feeder MOS: 91M, 63T, 45T, 63M, 91A, 63E, 45E, 91P, 63D, 45D, 91B, 63B, 63S.
  • Security Clearance: Existing Secret Clearance.
  • Armored Vehicle Experience: Experience with armored tracked vehicles.
  • Heavy Equipment Experience: Experience in diagnosing, repairing, and servicing heavy equipment in the private sector.

Experience Required:

  • Field Service Experience: 3 to 5 years in a field service role, mobile mechanic, or heavy equipment mechanic/automotive technician.

Experience Preferred:

  • Extended Field Service Experience: 8 years in a field service role or as a mobile diesel mechanic.
  • Dealership Experience: Dealership experience as a mechanic/technician.
  • Quality Assurance: Quality assurance and vehicle inspection experience.

Education Required:

  • High School Diploma: High School Diploma or Equivalent.

Education Preferred:

  • OEM Training/ASE Certifications: Private sector OEM training or ASE certifications.
  • Automotive Degree: Degree in Automotive Technology.

About STS Technical Services

STS Technical Services is a leading provider of engineering and staffing solutions, dedicated to connecting highly skilled professionals with top companies in the industry. We pride ourselves on delivering exceptional service and support to our clients and employees.

Equal Opportunity Employer

STS Technical Services is committed to providing equal employment opportunities for all job applicants and employees. Employment decisions are based on job-related reasons regardless of an applicant’s race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

#IndeedSTS

Prototype Technician

|

17 August 2026

|
No comments

Technical Illustrator

STS Technical Services is hiring Prototype Technicians in Madison Heights, Michigan to support the assembly, maintenance, and testing of tactical wheeled vehicles and battlefield systems. This hands-on role is ideal for experienced mechanical technicians who enjoy building complex equipment, troubleshooting mechanical systems, and working alongside engineering teams to develop and validate prototype vehicles.

If you have experience working on medium-duty trucks, military vehicles, or heavy equipment and are looking for an opportunity to contribute to cutting-edge defense programs, we encourage you to apply.

Position Overview

As a Prototype Technician, you will build, disassemble, repair, and maintain prototype tactical vehicles while supporting engineering, testing, and customer demonstration activities. You’ll work with mechanical, hydraulic, drivetrain, and powertrain systems while helping ensure projects remain on schedule and meet quality standards.

Responsibilities

  • Tear down and assemble tactical military vehicles according to engineering work instructions
  • Report build challenges and mechanical issues to supervisors during prototype development
  • Assist engineering teams in resolving technical and mechanical issues throughout vehicle builds
  • Support customer demonstrations, testing activities, and marketing events showcasing defense products
  • Repair and maintain heavy equipment, including engines, hydraulic systems, and transmissions
  • Remove, disassemble, clean, inspect, and reassemble vehicle components
  • Read and interpret service manuals, blueprints, and work instructions
  • Diagnose mechanical issues and perform failure analysis when problems occur
  • Operate forklifts, cranes, and other equipment required for assembly operations
  • Report safety concerns and maintain a safe work environment
  • Assist Quality Assurance personnel with vehicle verification and functional testing
  • Perform daily housekeeping and maintain organized work areas
  • Follow all safety procedures, properly use PPE, and operate tools safely
  • Assist with shipping and receiving activities as needed
  • Perform other duties as assigned

Qualifications

  • High school diploma or equivalent
  • Two to four years of verified mechanical experience working in a medium-duty truck or heavy equipment shop environment
  • Equivalent combinations of additional experience or advanced education may be considered
  • Ability to read and interpret service manuals, blueprints, and work instructions
  • ASE certification strongly preferred
  • Mechanical experience with International LLC trucks strongly preferred
  • Ability to travel up to 10 to 20 percent as required
  • Willingness to work mandatory overtime when needed
  • Ability to lift up to 50 pounds regularly and perform frequent standing, walking, squatting, kneeling, pushing, and pulling
  • Must qualify as a U.S. Person

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense, and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you’re an experienced mechanical technician who enjoys solving complex problems, building advanced vehicles, and supporting innovative defense programs, apply today to join STS Technical Services as a Prototype Technician in Madison Heights, Michigan.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, or any other protected characteristic under applicable law.

#IndeedSTS

Automotive Offline Technician

|

10 August 2026

|
No comments

Automotive End of Line Technician Jobs in Spartanburg, South Carolina

STS Technical Services is hiring Automotive End of Line Technicians in Spartanburg, South Carolina. This role sits at the final stage of the build process where systems are tested, validated, and cleared for delivery. If you can diagnose issues, verify performance, and take ownership of quality before a vehicle leaves the line, this is where you step in.

Position Overview

The End of Line Automotive Technician is responsible for assembling, validating, and troubleshooting vehicle systems to ensure final product readiness. This role requires strong mechanical and electrical troubleshooting skills, along with the ability to identify defects and support corrective actions before vehicles move forward.

Essential Duties

  • Maintain awareness of risks associated with high voltage, hydraulic, and pneumatic systems
  • Perform first-time installation of detail parts onto vehicles
  • Reinstall all removed components
  • Conduct functional testing of all assembled systems
  • Apply strong mechanical aptitude to assembly and validation tasks
  • Troubleshoot electrical, hydraulic, and mechanical systems using diagrams and technical documentation
  • Support efficient operations across multiple workstations
  • Position and fasten subassemblies including wiring, hoses, panels, doors, and underbody components
  • Use manipulators and tools according to standard work instructions
  • Complete functional testing and validation checks
  • Serve as a first line of defense for quality through ongoing inspections
  • Assist in identifying root causes of defects and implementing corrective actions
  • Maintain workplace organization and follow 5S standards to ensure a safe and clean environment
  • Perform additional duties as assigned

Minimum Qualifications

  • Minimum of 3 years of experience in automotive manufacturing
  • Mechanical and electrical troubleshooting experience
  • Strong computer, math, and reading skills
  • Ability to multitask and adapt to changing processes
  • Ability to follow established procedures and complete work accurately
  • Strong communication skills with leadership and team members
  • Team-oriented mindset with the ability to support peers

Preferred Qualifications

  • High school diploma or GED or equivalent certification
  • Four years of experience as an assembler, preferably in the automotive industry

Competencies

  • Accountability and ownership of work
  • Strong attention to detail
  • Team-oriented approach to problem solving
  • Ability to collaborate effectively
  • Flexibility and adaptability in a fast-paced environment
  • Initiative and proactive thinking
  • Strong insight into processes and problem solving
  • Commitment to meeting standards and delivering quality work
  • Integrity and adherence to company values
  • Ability to manage stress and perform under pressure
  • Reliability and dependability
  • Leadership through guidance and influence

Working Conditions

  • Physical Demands: Frequent standing, walking, lifting, and repetitive motion; occasional climbing and bending
  • Non-Physical Demands: Problem solving, communication, and sustained focus
  • Environmental Conditions: Exposure to noise, dust, and changing temperatures
  • Work Schedule: Routine shift hours with occasional workload fluctuations

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense, and industrial organizations. We connect skilled professionals with high-impact career opportunities across the United States. If you are ready to get to work, we are ready to help.

#IndeedSTS

Automotive Electrical Technician

|

9 July 2026

|
No comments

Automotive Electrical Technician Jobs in Spartanburg, South Carolina

STS Technical Services is hiring an Automotive Electrical Technician in Spartanburg, South Carolina. This role focuses on diagnosing and repairing electrical systems in advanced vehicle assemblies, including wiring harnesses and electrical components. If you understand schematics, can troubleshoot defects, and take pride in precision work, this is where you get after it.

Job Summary

The Electrical Technician is responsible for diagnosing and repairing electrical defects while supporting the assembly and inspection of vehicle systems and components. This includes identifying discrepancies that impact equipment performance and product quality, as well as assembling and repairing wiring harnesses and electrical systems.

Essential Duties and Responsibilities

  • Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards; use best practices to follow all safe procedures in assembling and testing of all products in assigned job function
  • Ability to interpret and process information through interaction with the MES System, including performing required tasks and confirming results
  • Read and interpret wiring schematics
  • Follow written instructions and input data accurately to prevent assembly issues and quality defects
  • Inspect and repair supplier wiring harnesses
  • Diagnose and repair electrical defects throughout the NGDV
  • Utilize specialized equipment including DVM, torque tools, DC tools, and hand tools
  • Assist in identifying root causes of defects and implementing preventative actions

Minimum Qualifications

  • 3 years or more of relevant experience or high school diploma or equivalent education
  • Previous experience with basic hand tools
  • Previous experience with basic electrical tools
  • Vocational training, apprenticeship, or related experience in automotive electrical systems

Preferred Qualifications

  • Previous experience working in a manufacturing operations environment
  • ASE Certification
  • Previous battery electric vehicle experience
  • Zero safety or quality incidents within the last 12 months
  • Ability and willingness to learn how to operate a truck and transport within facility grounds

Core Competencies

  • Champion Change
  • Lead Courageously
  • Coach and Develop
  • Build Relationships
  • Provide Direction
  • Establish Plan
  • Drive for Results
  • Demonstrate Functional Knowledge

Basic Competencies

  • Internal and external communication and coordination
  • Ability to read, write, and interpret instructions, procedures, and safety rules
  • Decision-making within established procedures and operational guidelines
  • Problem solving requiring interpretation of standard practices and procedures

Working Conditions

  • Physical Demands: Frequent standing, walking, reaching, lifting, and tool use; occasional climbing, bending, and driving
  • Non-Physical Demands: Analysis, communication, problem solving, and sustained mental activity
  • Environmental Demands: Exposure to noise, dust, temperature changes, and task variability
  • Work Schedule: Routine shift hours with occasional overtime or schedule adjustments as needed

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense, and industrial organizations. We connect skilled professionals with high-impact career opportunities across the United States. If you are ready to get to work, we are ready to help.

#IndeedSTS

Automotive Mechanical Technician

|

2 July 2026

|
No comments

Automotive Mechanical Technician

STS Technical Services is hiring Automotive Mechanical Technicians in Spartanburg, South Carolina. This role focuses on installing, troubleshooting, and validating mechanical systems within a manufacturing environment. If you can diagnose problems, work with precision, and keep builds moving without cutting corners, this is where you get to work.

Job Summary

The Mechanical Technician is responsible for installing, troubleshooting, and operating specialized systems within vehicle assemblies. This role also supports team development by training assembly personnel and ensuring proper system usage during build and final inspection processes. Strong communication and teamwork are critical to success in this position.

Essential Duties and Responsibilities

  • Maintain safety awareness when working with high voltage, high pressure hydraulic, and pneumatic systems
  • Troubleshoot, diagnose, and repair products
  • Perform first-time installation of detail parts onto vehicles
  • Reinstall all removed components
  • Clean parts before and after installation
  • Conduct functional testing of assembled systems
  • Apply strong mechanical aptitude to support build and repair processes
  • Work independently to meet production schedules
  • Fabricate and rework parts safely for component assembly
  • Diagnose and repair low voltage control systems

Minimum Qualifications

  • High school diploma or GED
  • 3 or more years of mechanical experience in an automotive manufacturing environment
  • Mechanical and electrical troubleshooting experience

Preferred Qualifications

  • Ten or more years of mechanical experience in automotive or machinery applications
  • Experience using basic hand tools
  • Understanding of JD Edwards system
  • Electrical system programming knowledge
  • Experience with Microsoft Office programs
  • Experience with general fabrication equipment
  • Ability to read and interpret engineering drawings

Core Competencies

  • Champion Change
  • Lead Courageously
  • Coach and Develop
  • Build Relationships
  • Provide Direction
  • Establish Plan
  • Drive for Results
  • Demonstrate Functional Knowledge

Basic Competencies

  • Internal and external communication and coordination
  • Ability to read, write, and interpret instructions and procedures
  • Decision-making within established processes
  • Problem solving requiring interpretation of standard practices and procedures

Working Conditions

  • Physical Demands: Frequent standing, walking, lifting, and tool use; occasional climbing and driving
  • Non-Physical Demands: Analysis, communication, and problem solving
  • Environmental Demands: Exposure to noise, dust, and changing work conditions
  • Work Schedule: Routine shift hours with occasional overtime or schedule adjustments

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense, and industrial organizations. We connect skilled professionals with high-impact career opportunities across the United States. If you are ready to get to work, we are ready to help.

#IndeedSTS