Archive

Aircraft Structures Technicians

|

29 May 2026

|
No comments

Aircraft Structures Technicians

STS Technical Services is hiring Aircraft Structures Technicians in Macon, Georgia.

Position Summary:

Performs structural repairs and fabrication of parts.  Ability to perform repairs per aircraft SRM and/or engineering dispositions.

Duties & Responsibilities:

  • Follows approved repair/modification procedures for component or aircraft, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
  • Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points
  • Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repairs using test equipment specified in technical manuals.
  • Completes work package documentation by signing/stamping off after finishing all designated operations.
  • Submits completed work to Quality Assurance for final/in progress inspection and recertification of airworthiness.
  • Bolts, screws, or rivets accessories to fasten, support, or hang components and subassemblies.
  • Cuts, trims, and files parts, and verifies fitting tolerances to prepare for installation.
  • Drills holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies.
  • Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
  • Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
  • Able to identify bolts, screws, rivets and various fasteners used to support or assemble components.
  • Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
  • Locates and marks reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
  • Provide information and documentation for engineering requests.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Qualifications:

Education:

  • High School/ GED
  • A&P license preferred

Experience:

  • Prefer at least 5 years experience.
  • Experience doing aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.

Knowledge, Skills & Abilities:

  • Must be able to fabricate parts.
  • Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
  • Repair body or structure of aircraft according to specifications.
  • Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
  • Be proficient in the usage of air powered hand tools and related equipment.
  • Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
  • Ability to work different shifts and flexible hours if required.
  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.

Working Conditions / Environment / Special Requirements:

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Ability to work flexible hours and different shifts if required.
  • Employees will be subject to the random drug and alcohol testing under FAA regulations.
  • Valid Drivers License.
  • Must be able to work in hot/Cold – Indoor/Outdoor.
  • Must be able to lift up to 50 lbs unassisted.
  • Must be able to do work above head.
  • Must be able to work at heights.
  • Must be able to work in confined spaces.
  • Must be able to climb.

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

AOG Travel Mechanic

|

29 May 2026

|
No comments

AOG Travel Mechanic

STS Technical Services is hiring an AOG Travel Mechanic in Miami, Florida.

This role supports aircraft maintenance at base and remote locations, with regular travel required for AOG recovery and special projects. Candidates must be local to Chicago, Illinois, Miami, Florida or Cincinnati, Ohio, or willing to relocate. Relocation assistance may be provided.

This is a hands-on aircraft maintenance role built for an experienced mechanic who can troubleshoot, inspect, repair, coordinate and move quickly when aircraft need support. AOG work is not slow work. It takes judgment, technical depth, clear communication and the ability to make good decisions when the clock is not your friend.

Position Summary

The AOG Travel Mechanic inspects, modifies and repairs aircraft at the maintenance base and remote locations. This role troubleshoots technical discrepancies, executes repairs on company aircraft and provides guidance to entry-level mechanics and on-site contract mechanics on basic tasks and troubleshooting.

The successful candidate will be proficient in the use of electronic test equipment, voltage and amperage measuring devices, recording equipment and troubleshooting systems.

Responsibilities

  • Troubleshoot technical discrepancies and execute repair of company aircraft.
  • Accomplish aircraft inspections per company procedures.
  • Use electronic test equipment, voltage or amperage measuring devices, recording devices and troubleshooting equipment.
  • Read and interpret blueprints, drawings, schematics and technical orders.
  • Inspect and assist in maintenance of company equipment and tooling.
  • Work as a member of a team that interfaces with contract maintenance personnel.
  • Follow safety measures, good shop practices and cleanliness standards.
  • Communicate discrepancies found during inspections to the Maintenance Control department and follow directions to troubleshoot and repair faulty conditions.
  • Ensure all aircraft documentation is completed accurately per company and FAA procedures prior to aircraft departure.
  • Provide guidance to mechanics on advanced tasks.
  • Organize daily tasks and coordinate inspections and repair of aircraft.
  • Coordinate materials and tooling requirements for projected work across the entire shift.
  • Perform manual and aircraft parts inventories as required.
  • Assist other company departments to support on-time aircraft departures.
  • Perform additional duties as assigned.

Qualifications

  • High School Diploma or equivalent.
  • Minimum 7+ years of transport category aircraft maintenance experience.
  • Boeing series aircraft experience preferred, including 737, 777, 747-400 and 747-800 Gen Fam with RII authorization.
  • Unrestricted engine run qualifications on 737, 777 and 747 aircraft.
  • Formal training on advanced systems and avionics on 737, 777 and 747 aircraft.
  • Valid passport and ability to travel regularly for AOG recovery and special projects.
  • Borescope qualified on CFM, Pratt Whitney or GE-90 engines.
  • Valid Federal Aviation Administration Airframe and Powerplant Certificate.

Skills

  • Must be able to read, write, fluently speak and understand the English language.
  • Strong analytical, interpersonal, verbal and written communication skills.
  • Working knowledge of Microsoft software and digital manuals.
  • Strong work ethic and organizational skills.
  • Ability to work in variable weather conditions.
  • Ability to lift parts and equipment.
  • Ability to work rotating schedules, including weekends, nights and holidays.

About STS Technical Services

STS Technical Services is a leading provider of workforce solutions across aviation, aerospace, defense, manufacturing and industrial markets. We connect skilled professionals with companies that need technical expertise, operational support and project-based talent to keep critical operations moving.

If you are an experienced A&P Mechanic with strong transport category aircraft experience and the ability to support AOG recovery work wherever the job takes you, we encourage you to apply today.

#IndeedAM

A&P Mechanics

|

28 May 2026

|
No comments

Visa Sponsorship Program STS Technical Services

STS Technical Services is hiring A&P Mechanics in Oscoda, Michigan.

Job Duties & Requirements:

  • A&P’s to perform hangar maintenance on mostly Boeing Commercial Aircraft. Kalitta’s own fleet consists of 747s, 767s and 777s.
  • An A&P mechanic inspects, services and repairs airplanes to ensure they’re operating correctly and safely.
  • A mechanic is responsible for ensuring that airplanes get regular maintenance and that any problems are fixed correctly.
  • Mechanics may work on different parts of an aircraft, such as the engine, landing gear, brakes and pumps.
  • A mechanic may work with special instruments designed specifically for aircraft maintenance.
  • The job may also involve standing on ladders and working at various heights.
  • The job duties of an A&P mechanic vary from preventive maintenance to repairs.
  • A mechanic makes routine inspections, documents inspections and repairs, performs scheduled maintenance and runs tests after making repairs or performing maintenance.
  • Job duties may vary based on which part of the plane is being worked on.
  • A mechanic working on the exterior of a plane may be fixing a broken wing, repairing paint or securing a door so it seals properly.
  • A mechanic working on the engine may be changing the oil, replacing belts or repairing a broken part.
  • An A&P mechanic must know and follow all regulations set by the FAA.
  • FAA regulations govern the maintenance schedules, inspections and repairs made to airplanes.
  • The FAA conducts regular checks on equipment and ensures regulations are being met.

Additional Information:

  • You must be flexible about potential work schedule, and the shifts and schedule you are assigned to work
  • You must be able to clear a criminal background check.
  • You must have a full set of applicable hand tools to perform the duties associated with your position.

Benefits:

  • Excellent pay and the opportunity to grow your skillset while working with one of the top aircraft maintenance providers in the United States.
  • Learn directly from a seasoned Aircraft Engineer.

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Structures Technician (VC-25B Program)

|

28 May 2026

|
No comments

Aircraft Structures Technicians

STS Aviation Services is hiring experienced Aircraft Structures Technicians to support the prestigious VC-25B Program in San Antonio, Texas. This is a unique opportunity to work on one of the most specialized and secure aircraft platforms in the world.

If you have strong experience in structural repair, critical tolerance drilling, and modification of complex airframes, we invite you to join a team committed to excellence, safety, and mission readiness.

Position Overview

As an Aircraft Structures Technician, you will perform structural maintenance, repairs, and modifications on transport-category aircraft, with a specific focus on the VC-25B platform. This includes both scheduled and unscheduled work performed to the highest standards of quality and compliance.

Key Responsibilities

  • Perform close-tolerance drilling, reaming, removal, and installation on critical support structures (doublers, triplers, seat tracks, stringers, etc.)
  • Read and interpret engineering drawings, technical orders, blueprints, schematics, and OEM specifications
  • Conduct sealing, painting, shimming, and preserving of structural components
  • Work with aluminum, titanium, stainless steel, and other non-porous metals
  • Use professional hand tools and specialty tools including 45- and 90-degree drills, rivet guns, countersink cages, pancake adapters, and more
  • Guide and mentor junior technicians and collaborate on complex modification efforts
  • Operate forklifts, cranes, and powered elevating equipment
  • Use computer systems to access documentation, submit part requests, and complete maintenance records
  • Adhere to all safety procedures and wear required PPE
  • Perform quality inspections and make entries in aircraft logs and records as needed
  • Maintain flexibility in shift scheduling, including potential nights, weekends, and holidays

Basic Qualifications

  • 4+ years of heavy aircraft structures experience (transport-category aircraft)
  • Experience with non-porous metals: aluminum, titanium, stainless steel
  • Demonstrated ability with close-tolerance structural repairs and tooling
  • Skilled in reading and interpreting blueprints, engineering documents, and technical manuals
  • Familiarity with shop math and general aviation maintenance practices
  • Proficient in basic computer applications and aircraft-related software systems
  • Ability to work at heights, in confined spaces, and under physically demanding conditions
  • Must be a U.S. citizen able to obtain customer approval for aircraft access
  • Dual citizenship or prior foreign citizenship may preclude access

Preferred Qualifications

  • Experience working on VIP or specialty aircraft interiors within the past 10 years
  • Prior experience supporting military aircraft, special mission platforms, or government contracts
  • Knowledge of structural systems on wide-body aircraft or presidential support aircraft

Physical & Environmental Requirements

  • Ascend/descend ladders and stands, lift up to 35 lbs (occasionally more with assistance)
  • Work in noisy environments and elevated platforms
  • Frequent reaching, standing, crawling, kneeling, and exposure to hazardous materials
  • Pass visual acuity and color tests
  • Use of personal protective gear for face, eyes, ears, hands, and arms

Why STS Aviation Services?

STS Aviation Services operates one of the most advanced and respected MRO programs in the industry. As a key player in both commercial and defense aviation support, our team is trusted to work on mission-critical aircraft platforms that demand precision, discretion, and integrity.

We offer competitive compensation, growth opportunities, and the chance to work on a program unlike any other.

Apply Today

Join us in San Antonio and be part of aviation history. Apply now to help shape and support the VC-25B Program.

Visit www.stsaviationgroup.com or contact us at 1-800-359-4787 to learn more.

#IndeedAM

A&P Licensed Floor Inspector

|

28 May 2026

|
No comments

STS Technical Services is hiring an A&P Floor Inspector in Waterford, Michigan.

This is an afternoon shift contract opportunity with strong potential for direct hire. The role is built for an experienced aircraft maintenance professional who knows corporate aviation, understands inspection discipline and can support return-to-service work without needing someone to hold the flashlight.

Candidates must have recent corporate aircraft maintenance and inspection experience, along with a current FAA Airframe & Powerplant License.

Position Summary

The A&P Floor Inspector is responsible for overseeing corporate aircraft maintenance activities and ensuring all work is completed in accordance with FAA regulations, manufacturer specifications, repair station procedures and company quality standards.

This role provides technical guidance to maintenance personnel, performs in-process and final inspections, reviews maintenance documentation and supports aircraft return-to-service activities in a fast-paced corporate aviation environment.

This position is scheduled for afternoon shift coverage and requires a highly experienced maintenance professional capable of working independently with minimal supervision.

Responsibilities

  • Perform in-process and final inspections on corporate aircraft maintenance activities.
  • Ensure all maintenance work complies with FAA regulations, repair station procedures and manufacturer specifications.
  • Review maintenance documentation for accuracy and completeness.
  • Provide technical guidance and support to maintenance technicians on the hangar floor.
  • Inspect airframe, engine and aircraft systems for airworthiness and conformity.
  • Assist with troubleshooting and resolving maintenance discrepancies.
  • Verify proper completion of logbook entries, work orders and return-to-service documentation.
  • Coordinate with Quality, Production and Maintenance teams to ensure efficient workflow and compliance.
  • Maintain a safe and organized work environment.
  • Support aircraft on road trips or offsite maintenance events when required.

Requirements & Qualifications

  • Current and valid FAA Airframe & Powerplant License with no history of infractions.
  • Minimum of 10 years of aircraft maintenance experience required.
  • Previous aircraft inspection experience required.
  • Inspection Authorization strongly preferred.
  • Recent hands-on experience with turbine-powered aircraft required.
  • Proven corporate airframe maintenance experience required.
  • Experience working under FAA Part 145 repair station operations required.
  • Part 135 experience preferred.
  • Factory or equivalent training on Gulfstream, Falcon, Learjet, Challenger, Hawker or Citation aircraft preferred.
  • FCC License is a plus.
  • Strong troubleshooting and diagnostic abilities with minimal supervision.
  • Ability to read and interpret technical manuals, maintenance documents and engineering specifications.
  • Excellent communication skills, professionalism and attention to detail.
  • Flexibility to work afternoons, overtime, weekends and occasional offsite assignments as needed.

Why Join STS Technical Services?

  • Opportunity to work with leading corporate aviation maintenance teams.
  • Long-term contract opportunity with direct hire potential.
  • Competitive compensation.
  • Fast-paced and professional maintenance environment.
  • Work with some of the most recognized corporate aircraft platforms in the industry.

About STS Technical Services

STS Technical Services is a leading provider of workforce solutions across aviation, aerospace, defense, manufacturing and industrial markets. We connect skilled professionals with companies that need technical expertise, operational support and project-based talent to keep work moving.

If you are an experienced A&P Inspector with corporate aircraft maintenance experience and the ability to support high-quality maintenance execution on the hangar floor, we encourage you to apply today.

#IndeedAM

Lead A&P Mechanic

|

28 May 2026

|
No comments

Lead A&P Mechanic
Location: Waterford, Michigan
Company: STS Technical Services
Employment Type: Contract with potential for direct hire

STS Technical Services, a trusted aviation staffing leader for over 41 years, is hiring an experienced Lead A&P Mechanic to oversee and support corporate aircraft maintenance operations in Waterford, Michigan. This contract role offers the opportunity to transition to a direct hire position. Corporate airframe experience is required.

In this leadership position, you will guide, train, and equip a skilled team of maintenance professionals while ensuring the safe, efficient, and compliant upkeep of corporate aircraft. If you bring advanced technical expertise, strong leadership skills, and a hands-on approach to maintaining operational readiness, we want to hear from you.

Key Responsibilities

  • Supervise and coordinate Maintenance Technicians engaged in modifying, maintaining, and repairing aircraft systems.
  • Assign workforce tasks, balancing skill sets and operational needs.
  • Provide training, mentorship, and performance feedback to team members.
  • Foster a positive, safety-focused work environment.
  • Perform aircraft maintenance, including:
  • Adjusting, aligning, and calibrating aircraft systems.
  • Inspecting engines and components for wear or defects.
  • Disassembling and inspecting parts for damage.
  • Installing and repairing structural, hydraulic, mechanical, and electrical components.
  • Testing systems with specialized diagnostic equipment.
  • Interpret maintenance manuals, drawings, and technical publications.
  • Collaborate with project managers to meet deadlines and operational goals.
  • Document all maintenance activities accurately in aircraft forms and automated systems.
  • Ensure compliance with FAA, safety, and quality procedures.
  • Respond to technical, customer, and team inquiries in a timely manner.
  • Work cross-functionally to achieve production, quality, and logistics objectives.

Qualifications

  • Current FAA Airframe & Powerplant (A&P) License with no infractions.
  • Recent hands-on A&P experience with turbine-powered aircraft.
  • Proven corporate airframe maintenance experience is required.
  • Factory or equivalent training on Gulfstream, Falcon, Learjet, Challenger, Hawker, or Citation aircraft preferred.
  • Experience under FAA Part 145 repair station operations required; Part 135 experience preferred.
  • Inspection Authorization (IA) and/or FCC License a plus.
  • Ability to troubleshoot and repair airframe and engine systems with minimal supervision.
  • Strong technical reading and interpretation skills.
  • Flexibility to work days, nights, weekends, overtime, and occasional offsite maintenance.
  • Minimum 5 years of aircraft maintenance experience.
  • Excellent communication skills, customer focus, and attention to detail.

Why Join STS Technical Services?

STS Technical Services is a Top 100 Staffing Firm connecting skilled aviation professionals with world-class employers. When you join us, you gain access to competitive pay, industry-leading benefits, and a team that advocates for your success.

Apply Today

If you’re ready to lead in a high-performance maintenance environment, click the link below to apply and take your career to new heights with STS Technical Services in Waterford, Michigan.

#IndeedAM

Aircraft Sheet Metal Mechanics (Airframe Licensed)

|

28 May 2026

|
No comments

Aircraft Sheetmetal Assembly Mechanic Job in Stuart, Florida STS Technical Services

Location: Waterford, Michigan
Industry: Aviation Maintenance
Employment Type: Full-Time

STS Technical Services is hiring Sheet Metal Mechanics with Airframe License in Waterford, Michigan. Whether you’re just starting out or have a few years of hands-on experience, this is your chance to work on advanced business-class aircraft alongside a dedicated, professional team.

Position Summary:

As a Sheet Metal Mechanic, you’ll be responsible for inspecting, repairing, and fabricating structural components on turbine-powered, transport-category aircraft. This role blends technical expertise with precision craftsmanship in a fast-paced, safety-first environment. If you’re highly detail-oriented and passionate about aviation, we want to hear from you.

Responsibilities:

  • Perform structural maintenance and repairs on transport-category aircraft in compliance with FAA regulations
  • Use blueprints, maintenance manuals, and schematics to diagnose and complete structural repairs and modifications
  • Fabricate, install, and replace sheet metal components using specialized tools and precise measuring equipment
  • Maintain accurate documentation of all repairs and inspections
  • Collaborate with FAA representatives, pilots, OEMs, and internal teams to ensure high-quality outcomes
  • Support compliance with both Part 145 and Part 135 repair and operational standards
  • Adhere to safety protocols while keeping the work area clean and organized
  • Work flexible shifts, including evenings, weekends, and holidays as needed
  • Perform additional tasks as directed by supervisors

Qualifications:

  • Valid FAA Airframe License required; Powerplant License strongly preferred
  • 1–2 years of recent experience in aircraft structural maintenance (turbine-powered aircraft preferred)
  • Experience working in a Part 145 repair station and Part 135 operational environment (required)
  • Inspection Authorization (IA) is a plus
  • Strong ability to interpret maintenance documents and technical manuals
  • Capable of working independently on structural, hydraulic, and mechanical systems
  • Excellent attention to detail, communication skills, and safety awareness

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that partners with the biggest names in the aviation, defense, manufacturing, and industrial sectors.

We connect skilled aviation professionals with rewarding career opportunities across the United States. From entry-level roles to high-level technician work, we help you grow your career and gain valuable experience in the field.

Have questions? Call 1-800-359-4787 to speak directly with a recruiter.

STS Technical Services is an equal opportunity employer.

#IndeedAM

A&P Mechanics

|

28 May 2026

|
No comments

AP Mechanic Jobs

Location: Waterford, Michigan
Industry: Aviation Maintenance
Employment Type: Full-Time

STS Technical Services is hiring experienced A&P Aircraft Maintenance Mechanics in Waterford, Michigan. In this role, you’ll work directly on business-class, transport-category aircraft and ensure they meet the highest standards of airworthiness and safety. Whether you’re early in your aviation career or a seasoned pro, we want to hear from you.

Position Summary:

As an A&P Aircraft Maintenance Mechanic, you’ll play a hands-on role in the day-to-day maintenance operations for a premier aviation services provider. You’ll be part of a dynamic team that values precision, safety, and technical excellence. We’re looking for detail-oriented professionals ready to make an immediate impact.

Responsibilities:

  • Perform scheduled and unscheduled maintenance on turbine-powered aircraft in compliance with FAA regulations and company standards
  • Inspect, troubleshoot, test, and repair aircraft airframes and engines
  • Interpret technical manuals, service bulletins, and blueprints to diagnose and repair discrepancies
  • Use precision instruments to assess wear and execute component replacements as needed
  • Document all work performed using approved maintenance records and procedures
  • Collaborate with OEMs, pilots, inspectors, and fellow technicians to maintain aircraft compliance
  • Support flexible work shifts, including weekends, nights, and holidays as required
  • Perform additional duties as assigned by leadership

Qualifications:

  • FAA Airframe & Powerplant License (required)
  • Minimum of 1–2 years of recent A&P experience; turbine-powered aircraft strongly preferred
  • Experience working in an FAA-certified Part 145 repair station (required)
  • Familiarity with Part 135 operations (preferred)
  • Inspection Authorization (IA) and/or FCC License are a plus
  • Strong troubleshooting skills across electrical, hydraulic, and mechanical systems
  • Ability to work independently while ensuring strict adherence to safety procedures
  • Clear written and verbal communication skills
  • Customer-focused attitude and a commitment to service excellence

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that partners with some of the largest names in the aviation, manufacturing, defense, and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the country. With hundreds of career opportunities to explore, we help you get your foot in the door and keep it there.

If you have questions or want to speak directly with a recruiter, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Interiors Technicians (Open/Close)

|

28 May 2026

|
No comments

Aircraft Interiors Technician Jobs

STS Technical Services is hiring Aircraft Interiors Technicians in Nashville, Tennessee.

Position Summary:

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Duties & Responsibilities:

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer’s (OEM’s) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Qualifications:

Education:

  • High School/ GED
  • A or P License preferred

Experience:

  • Journeyman Technician Role requiring Intermediate Skills to perform most of the standard tasks within the technical area assigned to.
  • Minimum of 2 years’ experience in at least one aircraft type. Proficiency should be demonstrated in at least one aircraft discipline through prior work experience to include:
  • General Maintenance
  • Structures
  • Interiors
  • Avionics Systems

Knowledge, Skills & Abilities:

  • Assignments require Standard Knowledge of a Technical Area.
  • Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
  • Performs moderately complex Technical Assignments.
  • Assists Advanced Level Technicians on more complex technical assignments
  • Knowledge of machines and tools, including their uses, repairs and maintenance
  • Knowledge of principles and processes for providing customer service.
  • Skilled with repairing, troubleshooting, installing and equipment maintenance.
  • Knowledge of FAA requirements for aircraft maintenance procedures
  • Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.

Working Conditions / Environment / Special Requirements:

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Tools must satisfy minimum tool list.
  • Valid Driver’s License.
  • Must be able to work in hot/Cold – Indoor/Outdoor.
  • Must be able to lift up to 50 lbs unassisted.
  • Must be able to do work above head.
  • Must be able to work at heights.
  • Must be able to work in confined spaces.
  • Must be able to climb.

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

B2 Licensed Aircraft Engineer

|

28 May 2026

|
No comments

B2 Licensed Aircraft Engineer Jobs

STS Aviation Services is hiring B2 Licensed Aircraft Engineers in Manchester, United Kingdom for contract opportunities starting in September 2026.

This role supports our commercial winter programme at the Manchester base and is built for licensed engineers who know how to lead maintenance activity, certify work within company approvals and keep aircraft moving safely, efficiently and correctly.

We are looking for engineers with current UK CAA B2 licensing and type certification on the Boeing 737 MAX, Airbus A320 or both.

Position Summary

STS Aviation Services is rapidly growing, and we are looking for new team members to be part of our journey as a leading UK MRO.

This is an opportunity to join our Manchester facility and play a key role in supporting scheduled and unscheduled base maintenance activity across major commercial aircraft platforms.

This is a contract opportunity tied to our September 2026 winter programme. If you want to join a growing, dynamic organisation where your experience can make a real operational impact, we would like to hear from you.

Aircraft Type Ratings

We are looking for B2 UK CAA Licensed Engineers with current type certification on the following aircraft:

  • Boeing 737 MAX
  • Airbus A320

Key Duties & Responsibilities

  • Maintenance, repair and overhaul of customer aircraft to include all forms of scheduled and unscheduled maintenance and certification of maintenance within the scope of company approvals.
  • Provide leadership and supervision of aircraft mechanics and support staff, leading the standards of maintenance execution by example.
  • Ensure aircraft maintenance activity is performed in a timely and efficient manner to the customer’s full satisfaction for on-time performance and technical dispatch reliability.

Skills and Experience

  • Part 66 CAA Licence, B2.
  • Current CAA Type Certification on the Boeing 737 MAX or Airbus A320.
  • Previous base maintenance experience.
  • Must be able to work in a dynamic environment and be flexible to meet changing working requirements.
  • Excellent interpersonal skills.
  • Organisational skills.
  • Good communication skills.
  • Knowledge of MS Office applications.

About STS Aviation Services

STS Aviation Services is a leading UK MRO provider delivering aircraft maintenance, modification and engineering solutions for commercial and military operators. With facilities in Manchester, Birmingham and Newquay, our teams support aircraft operators with the technical skill, operational discipline and responsive support required to keep aircraft moving.

If you are an experienced B2 Licensed Aircraft Engineer ready to support a major commercial winter programme in Manchester, we encourage you to apply today.

#IndeedUK