Archive

Structures Technician

|

8 October 2026

|
No comments

Aircraft Structures Technician Job in Melbourne, Florida STS Aviation Services

STS Aviation Services is hiring Structures Technicians in Melbourne, Florida. These positions support aircraft modification work on commercial and large regional aircraft in a fast-paced aviation maintenance environment.

If you have experience performing aircraft modifications, sheet metal work, structural installations or related production work, this is an opportunity to support high-profile aircraft programs with STS Aviation Services.

Position Overview

Structures Technicians will perform modification and installation work on A220, A320, Boeing 737 and ERJ-175 aircraft. Candidates should have previous experience working on commercial or large regional aircraft and must be able to pass both a written and hands-on assessment.

These positions offer highly competitive pay using a piece-rate structure per aircraft. Compensation will vary depending on the type of installation or modification performed.

Aircraft Platforms

  • A220
  • A320
  • Boeing 737
  • ERJ-175

Required Experience and Qualifications

  • 3+ years of previous experience on commercial or large regional aircraft
  • A&P license strongly preferred but not required
  • Must have a complete set of basic hand tools required to perform assigned duties
  • Must pass a written assessment
  • Must pass a hands-on assessment
  • Must be authorized to work in the United States
  • Must have a valid and current driver’s license
  • Must have the ability to obtain an airport badge
  • Must be able to work any shift or schedule required

Compensation

  • Highly competitive pay
  • Piece-rate pay structure per aircraft
  • Pay will vary by aircraft based on the type of installation or modification performed

Authorization

Candidates must be authorized to work in the United States.

About STS Aviation Services

STS Aviation Services is a global aircraft maintenance, repair and overhaul provider with facilities in the United States, United Kingdom and Ireland. Our teams support commercial and defense operators worldwide with comprehensive MRO, modification and engineering solutions.

If you are ready to apply your aircraft structures experience in Melbourne, Florida, apply today.

STS Aviation Services is an Equal Opportunity Employer.

#IndeedAM

Aircraft Maintenance Program Manager

|

8 October 2026

|
No comments

Aircraft Maintenance Program Manager Jobs - STS Aviation Services

STS Aviation Services is hiring Aircraft Maintenance Program Manager in Melbourne, Florida. 

Educational Background/Experience:

  • High School Diploma or GED
  • Airframe or Powerplant License
  • 5 years’ experience in aircraft heavy maintenance or modification
  • 5 years’ supervisory or lead experience in heavy maintenance or modifications
  • Working knowledge of FAA regulations pertaining to FAR Part 145 repair station operations

General Qualifications/Knowledge, Skills, Abilities (KSA):

  • Excellent verbal, written, computer, and presentation skills necessary to work effectively with a variety of individuals, departments and organizations.
  • Demonstrated proficiency in the operation of Microsoft Office Word and Excel, database software such as AvPro, or similar, email and other web-based applications

Preferred Skills:

  • Associates or Bachelor’s degree in business management or related technical field
  • Project Management certification
  • Two (2) years previous project management experience at a FAR 145 repair station
  • Working knowledge of process improvement methodology and application i.e. (Six Sigma. Lean Principles)

Nature of Work:

  • Office environment
  • Will work with the production team on aircraft to evaluate status of program to make sure all program goals are met, and to provide guidance if changes are required.
  • Possibility of travel to meet customers’ project needs, or to evaluate offsite project production.

Desired Characteristics:

  • Possess verbal, written presentation, problem solving and interpersonal skills necessary to effectively communicate, update, persuade and/or facilitate discussions with all levels of employees, management & customers
  • Proven planning and organizational skills to process, coordinate, prioritize and track workload requirements in a multi-project environment
  • Excellent working knowledge of all aspects of maintenance to include mechanical, structural and avionics systems
  • Be self-motivated and able to work independently or as part of a team

Classification:

  • Non-Exempt Hourly – Full Time Regular

General Responsibilities:

  • Provide planning, administrative, budgetary, and reporting of assigned Modification or Heavy Maintenance lines.
  • Also, provides support to avionics, fuel, composite and paint.
  • Ensure work is performed safely within budgeted time and while remaining in regulatory compliance and meeting customer and company guidelines.
  • Performs and recommends management actions related to hiring, scheduling, employee development, coaching, mentoring.
  • Being the liaison point of contact between STS and the customer.
  • Any other duties delegated by the DOM, or VP of Operations.

About STS Aviation Services:

STS Aviation Services operates three state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400 Ext 9176.

#IndeedAM

Aircraft Maintenance Production Supervisor

|

8 October 2026

|
No comments

Aircraft Maintenance Production Supervisor Jobs

STS Aviation Services is hiring Aircraft Maintenance Production Supervisors in Melbourne, Florida. In this leadership role, you’ll oversee a dedicated maintenance crew and ensure all assigned tasks meet FAA regulations, customer requirements, and internal quality standards. The ideal candidate brings strong organizational skills, technical expertise, and a hands-on leadership style to guide operations efficiently and effectively.

Key Responsibilities

  • Provide direct supervision over assigned maintenance personnel and tasks.
  • Ensure maintenance work and documentation comply with FAA regulations and customer maintenance programs.
  • Assign tasks, monitor progress, and manage shift schedules.
  • Evaluate and estimate labor and material costs for maintenance projects.
  • Coordinate with other departments to align maintenance flow plans.
  • Identify and address training needs, tooling requirements, and special equipment needs.
  • Co-sign for maintenance performed by uncertificated personnel when required.
  • Ensure proper execution and documentation of all work performed.
  • Supervise unfamiliar personnel in proper methods, techniques, tools, and procedures.
  • Maintain daily turnover reports to ensure shift-to-shift continuity.
  • Maintain a clean, organized hangar and work environment at all times.

Position Requirements

  • Prior leadership experience in an FAA Part 145 repair station or equivalent environment preferred.
  • Strong knowledge of FAA regulations, aircraft maintenance practices, and inspection procedures.
  • Excellent communication and team coordination skills.
  • Ability to evaluate labor, time, and resources for scheduled and unscheduled maintenance events.
  • Experience supervising uncertificated personnel under FAA regulations.
  • Commitment to safety, compliance, and quality.

About STS Aviation Services

STS Aviation Services is the aircraft maintenance, repair, and overhaul division of STS Aviation Group. With operations in the United States, United Kingdom, and Ireland, our team is widely recognized as one of the leading MRO providers in the industry. At our Melbourne facility, we offer a wide range of services supporting commercial and defense aircraft, and we’re proud to maintain a culture built on safety, integrity, and teamwork.

Apply Today

Ready to take the next step in your career? Join a team that values technical excellence, accountability, and leadership. Click the link below to apply now and learn more about opportunities with STS Aviation Services in Melbourne.

#IndeedAM

Lead Technician (Structures)

|

8 October 2026

|
No comments

Lead Aircraft Structures Technician Jobs in Melbourne

STS Aviation Services is hiring Lead Aircraft Structures Technicians in Melbourne, Florida.

The View From 10,000 Feet:

STS Aviation Services is seeking qualified Lead Aircraft Structure technicians, to join our overhaul and repair station in Melbourne, FL. These are direct full time positions, and are predominately working on the Airbus A320 and CRJ Aircraft.

Qualifications:

  • 4 years minimum experience working as an Aircraft Sheet Metal technician, maintaining and repairing Commercial and/or large regional aircraft.  Comparable military experience is acceptable.
  • 2 years minimum experience, working as a Lead Aircraft Structures Technician or Supervisor
  • Valid A&P license is required
  • Must be willing and able to work whatever shift and schedule is required.
  • Must have the ability to obtain an airport license

Additional Considerations:

  • Must hold a valid Driver License.
  • Must not be under a doctor’s care with limited work restrictions.
  • Must be able to pass a back ground check and obtain all necessary badging.
  • Must be able to ascend/descend ladders, stairs and work stands unassisted.
  • Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
  • Must be able to lift up to 50 pounds unassisted.
  • Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
  • Must have excellent communication and people skills.
  • Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
  • Must have problem solving and organizational skills.
  • Must be able to read and understand company and manufacturer manuals.

Authorization:

  • All candidates must currently be authorized to work in the United States.

Benefit Information:

  • Health Insurance
  • Paid Time Off
  • Holiday Pay
  • 401k program

About STS Aviation Services:

STS Aviation Services operates four state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400 Ext 9176.

#IndeedAM

Lead Airframe & Powerplant Technicians

|

8 October 2026

|
No comments

STS Aviation Services is hiring Lead Airframe & Powerplant Technicians to join its aircraft base maintenance team in Melbourne, Florida.

Position Summary:

STS Aviation Services is seeking qualified A&P Lead technicians, to join our overhaul and repair station in Melbourne, FL.    These are direct full time positions, and are predominately working on the Airbus Aircraft.

Qualifications:

  • 4 years minimum experience working as an A&P Technician, maintaining Commercial and/or large regional aircraft.  Comparable military experience is acceptable.
  • 2 years minimum experience, working as a Lead A&P Technician or Supervisor
  • Valid A&P license is required
  • Must be willing and able to work whatever shift and schedule is required.
  • Must have the ability to obtain an airport license

Additional Qualifications:

  • Must hold a valid Driver License.
  • Must not be under a doctor’s care with limited work restrictions.
  • Must be able to pass a back ground check and obtain all necessary badging.
  • Must be able to ascend/descend ladders, stairs and work stands unassisted.
  • Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
  • Must be able to lift up to 50 pounds unassisted.
  • Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
  • Must have excellent communication and people skills.
  • Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
  • Must have problem solving and organizational skills.
  • Must be able to read and understand company and manufacturer manuals.

Authorization:

  • All candidates must currently be authorized to work in the United States.

Benefit Information:

  • Health Insurance
  • Paid Time Off
  • Holiday Pay
  • 401k program

About STS Aviation Services:

STS Aviation Services operates four state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400.

#IndeedAM

Airframe & Powerplant Technician

|

8 October 2026

|
No comments

STS Aviation Services is hiring experienced A&P Technicians to join our growing aircraft overhaul and repair station in Melbourne, Florida. These are direct-hire, full-time positions supporting heavy maintenance on Airbus A320, Boeing 737, 767, and A220 aircraft.

We are proud to offer some of the highest pay rates in the country, with top-tier technicians earning up to $40/hour, based on experience.

Position Summary:

This role is ideal for aviation professionals seeking a long-term opportunity in a high-performing MRO facility. Candidates must be experienced, licensed, and ready to work flexible shifts to meet operational demands.

Qualifications:

  • Minimum of 3 years of experience as an A&P Technician in a MRO or line maintenance environment
  • Strong preference for candidates with Airbus A320 or A220 experience
  • Valid FAA Airframe & Powerplant License required
  • Must be authorized to work in the United States
  • Must have a complete set of hand tools applicable to the position
  • Valid driver’s license required
  • Must be able to obtain and maintain an airport security badge

Physical Requirements:

  • Ability to ascend/descend ladders, stairs, and stands
  • Ability to bend, kneel, crawl, and stoop in confined spaces
  • Must be able to lift up to 50 lbs unassisted
  • Must be able to work in varying climate conditions and moderate noise levels

Additional Skills:

  • Excellent communication and interpersonal skills
  • Strong judgment in maintenance and safety procedures
  • Ability to read and interpret technical manuals
  • Solid problem-solving and organizational skills
  • Team-oriented mindset with the ability to work independently

Pay & Benefits:

  • Competitive pay up to $40/hour, depending on experience
  • Full-time direct employment with STS Aviation Services
  • Health Insurance
  • Paid Time Off (PTO)
  • Holiday Pay
  • 401(k) retirement plan

About STS Aviation Services:

STS Aviation Services is a global leader in aircraft maintenance and modification, operating three state-of-the-art aircraft hangars, two interior modification facilities, and more than 40 line maintenance stations across the United States and Europe. Our team is committed to delivering high-quality MRO solutions and supporting aviation customers worldwide.

To learn more, visit www.stsaviationgroup.com or call 1-800-800-2400 ext. 9176.

STS Aviation Services is an Equal Opportunity Employer.

#IndeedAM

A&P Mechanics

|

8 October 2026

|
No comments

STS Line Maintenance is hiring A&P Mechanics in Fort Myers, Florida.

Position Summary:

STS Line Maintenance is looking for highly motivated Aircraft Maintenance Professionals to help us grow our line maintenance station in Ft Myers FL (RSW).  The A&P Aircraft Maintenance Technician supports the daily needs of the maintenance operations for our customers and ensures an outstanding experience by providing top-level service.

STS Line Maintenance is one of the largest line maintenance support providers in the United States, and we pride ourselves in providing high quality and reliable aircraft maintenance support  throughout our extensive, rapid-response, nation-wide network

Job Responsibilities & Duties:

  • This position reports directly to the Line Maintenance Station Manager and Station Leads. Candidate will work in close partnership with the field airlines, flight crew and other Aircraft Maintenance Controllers.
  • The candidate will ensure aircraft are maintained to airworthiness standards prescribed by applicable regulations, airworthiness directives, company policies and best practices.
  • Inspect, test, troubleshoot, adjust and repair different transport category aircraft airframes and engines using hand tools and test equipment.
  • Maintain the highest level of quality and integrity.
  • Adjust, repair or replace defective components based on analysis of test results while following maintenance manuals, schematics, handbooks and other technical documentation.
  • Use precision instruments and equipment to measure parts for wear and repair or replace as required.
  • Other duties as may be deemed necessary.
  • Able to work outdoors and in inclement weather as required.
  • Work will be performed on various Commercial and Large Regional aircraft, including but not limited to the Airbus A320, CRJ, and Embraer 170.

The Ideal Candidate Requirements & Qualification:

  • Must hold a current and valid FAA Airframe and Powerplant certifications  (A&P) with no history of infractions.
  • Recent A&P experience on turbine powered aircraft considered a plus.
  • Own set of standard line maintenance tools (calibrated & specialty tooling will be provided).
  • Self-motivated with a positive attitude while being able to perform your job with minimal supervision.
  • With or without accommodations, employees must be able to work standing, climb ladders and stairs and must be able to lift 50 lbs. unassisted.
  • Must be able to pass background check as well as drug & alcohol test. In addition, he / she must be able to obtain customs & border patrol clearance.
  • Must have basic-to-mid-level computer & organizational skills.
  • Experience working under a FAA approved Part 145 repair station or Part 135 experience is highly desired.
  • Inspection Authorization (IA) license is a plus.
  • Must be able to read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing, or replacing, malfunctioning and/or damaged components.
  • Ability to work with little supervision while being able to trouble shoot and repair systems on aircraft airframes and engine(s). This includes electrical, mechanical and hydraulic.
  • Versatility and flexibility will be important as the schedule could include days, nights, weekends and holidays.
  • Superior customer focus, communication skills, and work ethic with a commitment to excellence.

Rate Of Pay:

  • Starting Rate of pay is determined by previous experience and formal training, and will range between $32 to $40 per hour.
  • Yearly raises are available upon evaluation.

Benefits:

  • Full Time: PTO, Health Insurance, 401K. No Benefits for Part Time.

About STS Line Maintenance:

STS Line Maintenance operates 51 line maintenance stations throughout the United States, Bahamas, United Kingdom and France.

At each of these stations, our team(s) offer a full range of support services, FAA / DER engineering assistance, AOG response teams and enhanced reliability through rapid response times. Skilled mechanics stand ready to handle RON maintenance, turnaround checks, non-routine discrepancy reports and ground equipment maintenance via scheduled or on-call action.

To learn more about STS Line Maintenance and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-359-4787 ext. 9176.

#IndeedAM

A&P Mechanics

|

8 October 2026

|
No comments

STS Line Maintenance is hiring A&P Mechanics in Grand Rapids, Michigan. 

Hiring Note: All candidates must currently be authorized to work in the United States.

Position Summary:

Looking for highly motivated Aircraft Maintenance Professionals wanting to kick-start their careers and help us grow our GRR (Grand Rapids, MI) Line Maintenance station. The A&P Maintenance Technician supports the daily needs of the maintenance operations of our customers and ensures an outstanding experience by providing top level service.

STS Line Maintenance is one of the largest AOG (Aircraft on Ground) support providers for Part 125, 121, 135 and 91 operators  worldwide. We pride ourselves over excellence in immediate and reliable aircraft line maintenance and servicing throughout our extensive rapid response nation-wide network.

Job Duties:

  • This position reports directly to the Station Manager, and works in close partnership with the field Airlines, Flight Crew and other Aircraft Maintenance Controllers.
  • Ensures aircraft are maintained to airworthiness standards prescribed by applicable regulations, airworthiness directives, company policies, and best practices.
  •  Inspect, test, troubleshoot, adjust, and repair different transport category aircraft airframes and engines using hand tools and test equipment.
  • Maintain the highest level of quality and integrity.
  • Adjust, repair or replace defective components based on analysis of test results, following maintenance manuals,
    schematics, handbooks and other technical documentation.

  • Use precision instruments and equipment to measure parts for wear, and repair or replace as required.
  • Other duties as may be deemed necessary.
  • Able to work outdoors and in inclement weather as required.  Work will be performed on the Airbus 319/320/321, Boeing 717/737,  Embraer 145/175, CRJ200/700/900

Qualifications:

  • Must hold a current valid FAA Airframe and Powerplant License (A&P) with no history of infractions and recent A&P experience on turbine powered aircraft considered a plus.
  • Own Set Of Standard Line Maintenance Tool (Calibrated & Specialty Tooling Will Be Provided).
  • Self-Motivated with positive attitude and able to perform with minimal supervision.   Must be able to work standing, must be able to climb ladders and stairs,  and must be able to lift 50 lbs
  • Able to pass background check/drug & alcohol test and Customs & Border Patrol Clearance
  • Basic To Mid-Level Computer & Organizational Skills
  • Experience working under a FAA approved Part 145 repair station required and Part 135 experience preferred.
  • Inspection Authorization (IA) License a plus.
  • Must be able to read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
  • Ability to work with little supervision to troubleshoot and repair systems on aircraft airframe and engine(s), including electrical, mechanical and hydraulic.
  • Versatility, flexibility, will be important as the schedule could include days, nights, weekends and holidays.
  • Superior customer focus, communication skills, and work ethic with a commitment to excellence.
  • Full Time and Part Time positions are available

Additional Notes:

  • Rate Of Pay: Rate of pay is determined on previous experience.  Yearly raises available upon evaluation.  Starting pay rates will range from $30-$38 DOE.
  • Full Time: PTO, Medical, Dental and Vision with 401K. No Benefits for Part Time.

About STS Line Maintenance:

STS Line Maintenance operates 50 line maintenance stations throughout the United States, Bahamas, United Kingdom and France.

At each of these stations, our team(s) offer a full range of support services, FAA / DER engineering assistance, AOG response teams and enhanced reliability through rapid response times. Skilled mechanics stand ready to handle RON maintenance, turnaround checks, non-routine discrepancy reports and ground equipment maintenance via scheduled or on-call action.

To learn more about STS Line Maintenance and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-359-4787 ext. 9176.

#IndeedAM

A&P Mechanics

|

8 October 2026

|
No comments

STS Line Maintenance is hiring A&P Mechanics at Dallas/Fort Worth International Airport.

Hiring Note: All candidates must currently be authorized to work in the United States.

Position Summary:

STS Line Maintenance is looking for highly motivated Aircraft Maintenance Professionals to help us grow our line maintenance station in San Antonio, TX (DFW) !!. The A&P Aircraft Maintenance Technician supports the daily needs of the maintenance operations for our customers and ensures an outstanding experience by providing top-level service. STS Line Maintenance is one of the largest line maintenance support providers in the United States, and we pride ourselves in providing high quality and reliable aircraft maintenance support throughout our extensive, rapid-response, nation-wide network.

Position Responsibilities:

  • This position reports directly to the Line Maintenance Station Manager and Station Leads. Candidate will work in close partnership with the field airlines, flight crew and other Aircraft Maintenance Controllers.
  • The candidate will ensure aircraft are maintained to airworthiness standards prescribed by applicable regulations, airworthiness directives, company policies and best practices.
  • Inspect, test, troubleshoot, adjust and repair different transport category aircraft airframes and engines using hand tools and test equipment.
  • Maintain the highest level of quality and integrity.
  • Adjust, repair or replace defective components based on analysis of test results while following maintenance manuals, schematics, handbooks and other technical documentation.
  • Use precision instruments and equipment to measure parts for wear and repair or replace as required.
  • Other duties as may be deemed necessary.
  • Able to work outdoors and in inclement weather as required.
  • Work will be performed on various Commercial and Large Regional aircraft, including but not limited to the Airbus A320,737, A300, A330, CRJ, and Embraer 170.

Job Qualifications:

  • Must hold a current and valid FAA Airframe and Powerplant certifications (A&P) with no history of infractions.
  • Recent A&P experience on turbine powered aircraft considered a plus.
  • Previous Experience working on the Boeing 737 or Airbus A300, A320, A330 or A220 is desired, but is not required
  • Gen Fams on the 737, A300, A320, A330 or A220 will get you a HIGHER PAY RATE !!
  • Own set of standard line maintenance tools (calibrated & specialty tooling will be provided).
  • Self-motivated with a positive attitude while being able to perform your job with minimal supervision.
  • With or without accommodations, employees must be able to work standing, climb ladders and stairs and must be able to lift 50 lbs. unassisted.
  • Must be able to pass background check as well as drug & alcohol test. In addition, he / she must be able to obtain customs & border patrol clearance.
  • Must have basic-to-mid-level computer & organizational skills.
  • Experience working under a FAA approved Part 145 repair station or Part 135 experience is highly desired.
  • Inspection Authorization (IA) license is a plus.
  • Must be able to read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing, or replacing, malfunctioning and/or damaged components.
  • Ability to work with little supervision while being able to trouble shoot and repair systems on aircraft airframes and engine(s). This includes electrical, mechanical and hydraulic.
  • Versatility and flexibility will be important as the schedule could include days, nights, weekends and holidays.
  • Superior customer focus, communication skills, and work ethic with a commitment to excellence.

Rate of Pay:

  • Rate of pay is determined by previous experience, and will range from $34-$42 based on previous experience !

Benefits:

  • Full Time: PTO, Health Insurance, 401K. No Benefits for Part Time.

About STS Line Maintenance:

STS Line Maintenance operates 51 line maintenance stations throughout the United States, Bahamas, United Kingdom.

At each of these stations, our team(s) offer a full range of support services, FAA / DER engineering assistance, AOG response teams and enhanced reliability through rapid response times.

Skilled mechanics stand ready to handle RON maintenance, turnaround checks, non-routine discrepancy reports and ground equipment maintenance via scheduled or on-call action.

To learn more about STS Line Maintenance and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-359-4787 ext. 9176.

#IndeedAM

A&P Mechanics

|

8 October 2026

|
No comments

STS Line Maintenance is hiring A&P Mechanics in Boise, Idaho, to support commercial aircraft line maintenance operations.

We’re looking for experienced, highly motivated aircraft maintenance professionals who can troubleshoot, inspect and repair transport-category aircraft while maintaining strict standards for safety, quality and airworthiness.

Pay ranges from $32 to $40 per hour based on experience.

Position Overview

The A&P Mechanic supports the daily maintenance needs of airline customers at our Boise line maintenance station.

Working closely with the Station Manager, Lead Aircraft Maintenance Technicians, airline personnel, flight crews and Aircraft Maintenance Controllers, you will help ensure aircraft are maintained in accordance with applicable regulations, airworthiness directives, company policies and approved maintenance procedures.

Work will be performed on aircraft including the Boeing 737NG and MAX, Airbus A320 family and Embraer 145, 170 and 175.

Job Responsibilities

  • Inspect, test, troubleshoot, adjust and repair transport-category aircraft airframes and engines
  • Ensure aircraft are maintained to applicable airworthiness standards and regulatory requirements
  • Diagnose mechanical, electrical and hydraulic system discrepancies
  • Adjust, repair or replace defective components based on test results
  • Follow aircraft maintenance manuals, schematics, handbooks and other approved technical documentation
  • Use hand tools, test equipment and precision measuring instruments during maintenance activities
  • Inspect components for wear and determine appropriate repair or replacement requirements
  • Work closely with airline personnel, flight crews and Aircraft Maintenance Controllers
  • Maintain high standards for quality, safety and workmanship
  • Perform maintenance outdoors and in varying weather conditions as required
  • Complete additional duties as assigned

Qualifications

  • Current and valid FAA Airframe and Powerplant License
  • No history of FAA certificate infractions
  • Ability to read and interpret aircraft maintenance manuals and specifications
  • Ability to troubleshoot and repair aircraft airframe and engine systems
  • Working knowledge of electrical, mechanical and hydraulic aircraft systems
  • Ability to work effectively with minimal supervision
  • Basic to intermediate computer skills
  • Strong organizational skills
  • Positive attitude and strong customer focus
  • Strong communication skills and work ethic
  • Ability to work days, nights, weekends and holidays as required
  • Ability to stand for extended periods
  • Ability to climb ladders and stairs
  • Ability to lift up to 50 pounds
  • Must own a standard set of line maintenance tools
  • Must be able to successfully complete required background screening and drug and alcohol testing
  • Must be able to obtain required Customs and Border Protection clearance

Calibrated and specialty tooling will be provided.

Preferred Qualifications

  • Recent A&P experience on turbine-powered aircraft
  • Experience working under an FAA-approved Part 145 repair station
  • Part 135 maintenance experience
  • Inspection Authorization

Aircraft Experience

Maintenance may be performed on:

  • Boeing 737NG
  • Boeing 737 MAX
  • Airbus A320 family
  • Embraer 145
  • Embraer 170
  • Embraer 175

Pay

Pay ranges from $32 to $40 per hour based on previous experience.

Benefits

Full-time employees are eligible for:

  • Paid Time Off
  • Health Insurance
  • 401(k)

Part-time positions do not include benefits.

About STS Line Maintenance

STS Line Maintenance provides aircraft line maintenance support across an extensive rapid-response network in the United States and internationally.

Our technicians support commercial and regional operators with scheduled and unscheduled maintenance, troubleshooting, repairs and other critical line maintenance services designed to keep aircraft operating safely and efficiently.

Apply Today

If you’re an FAA-certified A&P Mechanic with strong troubleshooting skills and experience supporting commercial aircraft maintenance, apply today to join STS Line Maintenance in Boise, Idaho.

Equal Opportunity Employer

STS Line Maintenance is an equal opportunity employer.

#IndeedAM