Archive

A&P Mechanics

|

16 October 2026

|
No comments

STS Line Maintenance is hiring A&P Mechanics in Rochester, New York.

Hiring Note: All candidates must currently be authorized to work in the United States.

Position Summary:

STS Line Maintenance is looking for highly motivated Aircraft Maintenance Professionals to help us grow our line maintenance station in Rochester, NY. The A&P Aviation Maintenance Technician supports the daily needs of the maintenance operations for our customers and ensures an outstanding experience by providing top-level service.

STS Line Maintenance is one of the largest line maintenance support providers in the United States, and we pride ourselves in providing high quality and reliable aircraft maintenance support throughout our extensive, rapid-response, nation-wide network. We are offering pay rates between $32 and $42 per hour, as determined and based on previous experience.

Position Responsibilities:

  • This position reports directly to the Line Maintenance Station Manager and Station Leads. Candidate will work in close partnership with the field airlines, flight crew and other Aircraft Maintenance Controllers.
  • The candidate will ensure aircraft are maintained to airworthiness standards prescribed by applicable regulations, airworthiness directives, company policies and best practices.
  • Inspect, test, troubleshoot, adjust and repair different transport category aircraft airframes and engines using hand tools and test equipment.
  • Maintain the highest level of quality and integrity.
  • Adjust, repair or replace defective components based on analysis of test results while following maintenance manuals, schematics, handbooks and other technical documentation.
  • Use precision instruments and equipment to measure parts for wear and repair or replace as required.
  • Other duties as may be deemed necessary.
  • Able to work outdoors and in inclement weather as required.
  • Work will be performed on various Commercial and Large Regional aircraft

The Ideal Candidate Requirements & Qualification:

  • Must hold a current and valid FAA Airframe and Powerplant certifications (A&P) with no history of infractions.
  • Recent A&P experience on turbine powered aircraft considered a plus.
  • Previous experience on Commercial and Large Regional aircraft is strongly preferred, but not required
  • Own set of standard line maintenance tools (calibrated & specialty tooling will be provided).
  • Self-motivated with a positive attitude while being able to perform your job with minimal supervision.
  • With or without accommodations, employees must be able to work standing, climb ladders and stairs and must be able to lift 50 lbs. unassisted.
  • Must be able to pass background check as well as drug & alcohol test. In addition, he / she must be able to obtain customs & border patrol clearance.
  • Must have basic-to-mid-level computer & organizational skills.
  • Experience working under a FAA approved Part 145 repair station or Part 135 experience is highly desired.
  • Inspection Authorization (IA) license is a plus.
  • Must be able to read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing, or replacing, malfunctioning and/or damaged components.
  • Ability to work with little supervision while being able to trouble shoot and repair systems on aircraft airframes and engine(s). This includes electrical, mechanical and hydraulic.
  • Versatility and flexibility will be important as the schedule could include days, nights, weekends and holidays.
  • Superior customer focus, communication skills, and work ethic with a commitment to excellence.
  • We are looking for candidates of all experience levels from Entry Level to Seasoned veterans
  • Currently hiring to fill MULTIPLE positions

Rate of Pay:

  • Rate of pay is determined by previous experience, with pay rates between $32 and $42 DOE.
  • Bonuses are available on a case by case basis, and are determined based on previous experience.
  • Yearly raises are available upon evaluation.

Benefits:

  • Full Time: PTO, Health Insurance, 401K. No Benefits for Part Time.

About STS Line Maintenance:

STS Line Maintenance operates 51 line maintenance stations throughout the United States, Bahamas, United Kingdom and France.

At each of these stations, our team(s) offer a full range of support services, FAA / DER engineering assistance, AOG response teams and enhanced reliability through rapid response times. Skilled mechanics stand ready to handle RON maintenance, turnaround checks, non-routine discrepancy reports and ground equipment maintenance via scheduled or on-call action.

To learn more about STS Line Maintenance and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-359-4787 ext. 9176.

#IndeedAM

A&P Mechanics

|

16 October 2026

|
No comments

STS Line Maintenance is hiring A&P Mechanics in Syracuse, New York.

Hiring Note: All candidates must currently be authorized to work in the United States.

Position Overview:

STS Line Maintenance is looking for highly motivated Aircraft Maintenance Professionals to help us grow our line maintenance station in Syracuse, New York (SYR). This is a Part-Time opportunity. The Part-Time A&P Aircraft Maintenance Technician supports the daily needs of maintenance operations for our customers and ensures an outstanding experience by providing top-level service.

STS Line Maintenance is one of the largest line maintenance support providers in the United States, and we pride ourselves on providing high-quality and reliable aircraft maintenance support throughout our extensive, rapid-response, nationwide network.

Job Duties:

  • This Part-Time position reports directly to the Line Maintenance Station Manager and Station Leads. Candidate will work in close partnership with the field airlines, flight crew and other Aircraft Maintenance Controllers.
  • The candidate will ensure aircraft are maintained to airworthiness standards prescribed by applicable regulations, airworthiness directives, company policies and best practices.
  • Inspect, test, troubleshoot, adjust and repair different transport category aircraft airframes and engines using hand tools and test equipment.
  • Maintain the highest level of quality and integrity.
  • Adjust, repair or replace defective components based on analysis of test results while following maintenance manuals, schematics, handbooks and other technical documentation.
  • Use precision instruments and equipment to measure parts for wear and repair or replace as required.
  • Other duties as may be deemed necessary.
  • Able to work outdoors and in inclement weather as required.
  • Work will be performed on various Commercial and Large Regional aircraft, including but not limited to the Airbus A320, CRJ, and Embraer 170.

Qualifications:

  • Must hold a current and valid FAA Airframe and Powerplant certifications  (A&P) with no history of infractions.
  • Recent A&P experience on turbine powered aircraft considered a plus.
  • Own set of standard line maintenance tools (calibrated & specialty tooling will be provided).
  • Self-motivated with a positive attitude while being able to perform your job with minimal supervision.
  • With or without accommodations, employees must be able to work standing, climb ladders and stairs and must be able to lift 50 lbs. unassisted.
  • Must be able to pass background check as well as drug & alcohol test. In addition, he / she must be able to obtain customs & border patrol clearance.
  • Must have basic-to-mid-level computer & organizational skills.
  • Experience working under a FAA approved Part 145 repair station or Part 135 experience is highly desired.
  • Inspection Authorization (IA) license is a plus.
  • Must be able to read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing, or replacing, malfunctioning and/or damaged components.
  • Ability to work with little supervision while being able to trouble shoot and repair systems on aircraft airframes and engine(s). This includes electrical, mechanical and hydraulic.
  • Versatility and flexibility will be important as the Part-Time schedule could include days, nights, weekends and holidays.
  • Superior customer focus, communication skills, and work ethic with a commitment to excellence.

Rate of Pay:

  • Rate of pay is determined by previous experience, and will range between $32 and $42 Depending on previous Experience and Training

Benefits:

  • Full Time: PTO, Health Insurance, 401K. No Benefits for Part Time.

About STS Line Maintenance:

STS Line Maintenance operates 51 line maintenance stations throughout the United States, Bahamas, United Kingdom and France.

At each of these stations, our team(s) offer a full range of support services, FAA / DER engineering assistance, AOG response teams and enhanced reliability through rapid response times. Skilled mechanics stand ready to handle RON maintenance, turnaround checks, non-routine discrepancy reports and ground equipment maintenance via scheduled or on-call action.

To learn more about STS Line Maintenance and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-359-4787 ext. 9176.

#IndeedAM

Aircraft Support Mechanics II

|

15 October 2026

|
No comments

Aircraft Support Mechanic Jobs

STS Technical Services is hiring Aircraft Support Mechanics in Atlanta, Georgia.

This role supports aircraft component repair, receiving inspection, supplier coordination and MRO operations. The Aircraft Support Mechanic will work across maintenance, engineering, planning and supplier teams to help ensure repaired components meet applicable airworthiness, configuration and contractual requirements.

The ideal candidate holds a current FAA Airframe and Powerplant certification, has relevant aviation maintenance or component repair experience and is comfortable supporting technical, operational and supplier-facing activities.

Position Overview

The Aircraft Support Mechanic will develop component repair work scopes, coordinate repairs with OEMs and third-party suppliers, inspect repaired and overhauled components and support parts moving through external repair channels.

This position also supports repair orders, purchase order activity, supplier communication, continuous improvement initiatives and MRO insourcing efforts.

Responsibilities

  • Develop work scopes for expendable components
  • Develop work scopes for recoverable, rotable and key repairable components
  • Coordinate component repairs with OEMs
  • Coordinate repairs with third-party repair suppliers
  • Collaborate with engineers, supervisors, Lead AMTs, AMTs, planners, CDMG, CCC personnel and repair vendors
  • Ensure work scopes meet applicable compliance requirements
  • Support airworthiness and configuration requirements
  • Perform receiving inspections on repaired and overhauled components
  • Determine component serviceability before returning parts to stock
  • Coordinate components sent to external repair agencies
  • Initiate repair orders
  • Process non-stock items
  • Resolve issues involving existing purchase orders
  • Update purchase orders as required
  • Communicate with repair suppliers
  • Verify repair quotations and invoice details
  • Perform general visual inspections of serviceable components
  • Sign off on applicable work documents and records as authorized
  • Support documentation involving FAA Form 8130-3 tags
  • Comply with applicable drug-testing requirements for safety-sensitive work
  • Support High Performance Work initiatives
  • Participate in LEAN improvement activities
  • Support Six Sigma initiatives
  • Maintain 5S standards
  • Support MRO insourcing efforts
  • Assist with the development and execution of repair supplier contracts
  • Identify cost-saving opportunities within sourcing and repair processes
  • Monitor performance metrics
  • Support Technical Operations goals and objectives
  • Maintain high customer service standards
  • Follow established safety and operational procedures

Qualifications

  • Current FAA Airframe and Powerplant certification
  • Must qualify at the AMT level or higher
  • Relevant experience in aircraft maintenance, component repair or a related aviation field
  • Valid driver’s license
  • Ability to work effectively with cross-functional teams
  • Ability to support compliance with customer and repair supplier contractual obligations
  • Ability to identify and implement cost-saving opportunities
  • Ability to monitor customer satisfaction and maintain service standards
  • Strong commitment to safety and operational compliance

Preferred Qualifications

  • Bachelor’s degree in Engineering
  • Bachelor’s degree in Aeronautics
  • Bachelor’s degree in Business Administration
  • Equivalent relevant work experience

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you are an FAA-certified A&P professional with experience in aircraft maintenance, component repair or aviation support operations, apply today to join STS Technical Services as an Aircraft Support Mechanic in Atlanta, Georgia.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedAM

A&P Mechanics

|

15 October 2026

|
No comments

STS Line Maintenance is hiring A&P Mechanics at Dallas/Fort Worth International Airport.

Hiring Note: All candidates must currently be authorized to work in the United States.

Position Summary:

STS Line Maintenance is looking for highly motivated Aircraft Maintenance Professionals to help us grow our line maintenance station in San Antonio, TX (DFW) !!. The A&P Aircraft Maintenance Technician supports the daily needs of the maintenance operations for our customers and ensures an outstanding experience by providing top-level service. STS Line Maintenance is one of the largest line maintenance support providers in the United States, and we pride ourselves in providing high quality and reliable aircraft maintenance support throughout our extensive, rapid-response, nation-wide network.

Position Responsibilities:

  • This position reports directly to the Line Maintenance Station Manager and Station Leads. Candidate will work in close partnership with the field airlines, flight crew and other Aircraft Maintenance Controllers.
  • The candidate will ensure aircraft are maintained to airworthiness standards prescribed by applicable regulations, airworthiness directives, company policies and best practices.
  • Inspect, test, troubleshoot, adjust and repair different transport category aircraft airframes and engines using hand tools and test equipment.
  • Maintain the highest level of quality and integrity.
  • Adjust, repair or replace defective components based on analysis of test results while following maintenance manuals, schematics, handbooks and other technical documentation.
  • Use precision instruments and equipment to measure parts for wear and repair or replace as required.
  • Other duties as may be deemed necessary.
  • Able to work outdoors and in inclement weather as required.
  • Work will be performed on various Commercial and Large Regional aircraft, including but not limited to the Airbus A320,737, A300, A330, CRJ, and Embraer 170.

Job Qualifications:

  • Must hold a current and valid FAA Airframe and Powerplant certifications (A&P) with no history of infractions.
  • Recent A&P experience on turbine powered aircraft considered a plus.
  • Previous Experience working on the Boeing 737 or Airbus A300, A320, A330 or A220 is desired, but is not required
  • Gen Fams on the 737, A300, A320, A330 or A220 will get you a HIGHER PAY RATE !!
  • Own set of standard line maintenance tools (calibrated & specialty tooling will be provided).
  • Self-motivated with a positive attitude while being able to perform your job with minimal supervision.
  • With or without accommodations, employees must be able to work standing, climb ladders and stairs and must be able to lift 50 lbs. unassisted.
  • Must be able to pass background check as well as drug & alcohol test. In addition, he / she must be able to obtain customs & border patrol clearance.
  • Must have basic-to-mid-level computer & organizational skills.
  • Experience working under a FAA approved Part 145 repair station or Part 135 experience is highly desired.
  • Inspection Authorization (IA) license is a plus.
  • Must be able to read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing, or replacing, malfunctioning and/or damaged components.
  • Ability to work with little supervision while being able to trouble shoot and repair systems on aircraft airframes and engine(s). This includes electrical, mechanical and hydraulic.
  • Versatility and flexibility will be important as the schedule could include days, nights, weekends and holidays.
  • Superior customer focus, communication skills, and work ethic with a commitment to excellence.

Rate of Pay:

  • Rate of pay is determined by previous experience, and will range from $34-$42 based on previous experience !

Benefits:

  • Full Time: PTO, Health Insurance, 401K. No Benefits for Part Time.

About STS Line Maintenance:

STS Line Maintenance operates 51 line maintenance stations throughout the United States, Bahamas, United Kingdom.

At each of these stations, our team(s) offer a full range of support services, FAA / DER engineering assistance, AOG response teams and enhanced reliability through rapid response times.

Skilled mechanics stand ready to handle RON maintenance, turnaround checks, non-routine discrepancy reports and ground equipment maintenance via scheduled or on-call action.

To learn more about STS Line Maintenance and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-359-4787 ext. 9176.

#IndeedAM

Lead Airframe & Powerplant Technicians

|

14 October 2026

|
No comments

STS Aviation Services is hiring Lead Airframe & Powerplant Technicians to join its aircraft base maintenance team in Melbourne, Florida.

Position Summary:

STS Aviation Services is seeking qualified A&P Lead technicians, to join our overhaul and repair station in Melbourne, FL.    These are direct full time positions, and are predominately working on the Airbus Aircraft.

Qualifications:

  • 4 years minimum experience working as an A&P Technician, maintaining Commercial and/or large regional aircraft.  Comparable military experience is acceptable.
  • 2 years minimum experience, working as a Lead A&P Technician or Supervisor
  • Valid A&P license is required
  • Must be willing and able to work whatever shift and schedule is required.
  • Must have the ability to obtain an airport license

Additional Qualifications:

  • Must hold a valid Driver License.
  • Must not be under a doctor’s care with limited work restrictions.
  • Must be able to pass a back ground check and obtain all necessary badging.
  • Must be able to ascend/descend ladders, stairs and work stands unassisted.
  • Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
  • Must be able to lift up to 50 pounds unassisted.
  • Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
  • Must have excellent communication and people skills.
  • Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
  • Must have problem solving and organizational skills.
  • Must be able to read and understand company and manufacturer manuals.

Authorization:

  • All candidates must currently be authorized to work in the United States.

Benefit Information:

  • Health Insurance
  • Paid Time Off
  • Holiday Pay
  • 401k program

About STS Aviation Services:

STS Aviation Services operates four state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry.

To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-800-2400.

#IndeedAM

Accessory Technician

|

14 October 2026

|
No comments

Technical Illustrator

STS Technical Services is hiring an Accessory Technician in Nashville, Tennessee, to support the testing, troubleshooting, repair and overhaul of aircraft components and accessories.

This position performs advanced electrical, hydraulic, avionic and electromechanical maintenance in accordance with FAA, FCC, OEM and company requirements. The Accessory Technician will work with navigation, radar, communication, instrumentation, hydraulic and landing gear systems while maintaining high standards for safety, quality and efficiency.

Position Overview

The Accessory Technician performs component maintenance, testing, troubleshooting, repair and overhaul work using approved procedures, technical documentation and test equipment.

The role includes hands-on work with avionics components and LRUs, electrical systems, wiring, circuit boards, wheels, brakes, landing gear and related aircraft accessories.

Responsibilities

  • Repair and overhaul aircraft components and accessories in accordance with FAA and OEM procedures
  • Ensure completed work meets prescribed standards and tolerances
  • Perform diagnostic, repair and overhaul tasks using approved procedures
  • Assist technicians and specialists with technically complex repairs
  • Follow applicable manual references and use the proper tools for each repair
  • Perform work involving wheels, landing gear and brake repairs
  • Follow established production schedules
  • Work with the Shop Lead and Production Maintenance Supervisor to address schedule delays
  • Follow work orders and repair orders
  • Ensure required documentation is completed accurately
  • Assist with maintenance records and technical data required by the FAA
  • Monitor and track parts shortages
  • Support material ordering to address parts shortages
  • Provide repair information to the Lead or Production Maintenance Supervisor for quotations
  • Create purchase requisitions for required parts and tooling
  • Communicate tooling requirements to the Lead or Production Maintenance Supervisor
  • Communicate by email, telephone and in person as required
  • Work with the Lead to coordinate third-party vendor tasks and services

Education and Experience

  • High school diploma or GED
  • At least two years of aircraft avionics maintenance experience
  • FAA A&P certification preferred
  • Experience troubleshooting avionics components and LRUs
  • Experience bench testing avionics components
  • Experience with communication, navigation and transponder systems preferred
  • Experience using avionics test benches or automated test equipment
  • Experience performing functional testing after repair or overhaul

Knowledge, Skills and Abilities

  • Ability to troubleshoot avionics systems
  • Ability to diagnose faults using test equipment and established troubleshooting procedures
  • Ability to read and interpret wiring diagrams and electronic schematics
  • Soldering and circuit board repair skills
  • Wire harness inspection and repair experience
  • Connector pin replacement experience
  • Electrical continuity and insulation testing experience
  • Experience using multimeters
  • Experience using oscilloscopes
  • Experience using avionics test equipment and test sets
  • Familiarity with CMM and repair station documentation
  • Experience using wire crimping tools and connector tooling

Working Conditions and Requirements

  • Ability to work safely and professionally while following applicable OSHA, EPA, state and federal regulations
  • Ability to wear a respirator when required in accordance with OSHA 29 CFR 1910.134 without restrictions that would prevent proper use or seal
  • Ability to obtain a SIDA badge may be a requirement for this position

General Expectations

  • Follow company values, department policies, directives and procedures
  • Incorporate Lean and P3E processes and concepts into daily work
  • Support continuous improvement of processes and procedures
  • Protect confidential and proprietary information
  • Meet established work schedule requirements
  • Perform additional duties as assigned

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have aircraft avionics maintenance experience and hands-on skills in component troubleshooting, bench testing and repair, apply today to join STS Technical Services as an Accessory Technician in Nashville, Tennessee.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedAM

A&P Mechanics

|

13 October 2026

|
No comments

AP Mechanic Jobs

STS Technical Services is hiring an A&P Mechanic in Fort Lauderdale, Florida.

This role supports depot-level aircraft maintenance, repair, inspection and testing across mechanical systems, components and aircraft structures. The position is designed for an experienced aviation maintenance professional with strong troubleshooting skills and hands-on experience working with hydraulic, pneumatic, plumbing, rigging and mechanical systems.

Position Overview

The A&P Mechanic will inspect, repair, assemble and test aircraft components and systems using approved maintenance procedures, OEM technical data, work package instructions, hand tools and testing equipment.

Work may involve engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage structures, wings, oil tanks, fuel tanks and related aircraft systems.

Responsibilities

  • Perform routine inspections and special maintenance to help prevent aircraft mechanical system and component failures
  • Perform operational checks on hydraulic systems
  • Inspect and troubleshoot pneumatic systems
  • Support aircraft plumbing, precision assemblies, rigging and control systems
  • Determine whether components should be repaired or replaced
  • Identify required repair methods and necessary replacement parts
  • Obtain required parts from Stores or departmental supplies
  • Repair, rework and modify worn or defective assemblies
  • Make component alterations or changes when required
  • Follow FAA-approved maintenance procedures
  • Use OEM technical data and work package instructions
  • Consult the Maintenance Lead when technical assistance is required
  • Inspect completed work before signoff
  • Perform rework when necessary
  • Verify repaired components meet prescribed standards and tolerances
  • Perform serviceability testing using OEM-specified test equipment
  • Complete required work package documentation
  • Sign or stamp completed operations as required
  • Submit completed and in-progress work to the Maintenance Lead for review
  • Submit work to Quality Assurance for required inspections and airworthiness recertification
  • Provide requested performance statistics and operational data
  • Accurately account for time and materials used during inspection and maintenance activities

Qualifications

  • High school diploma or GED
  • Generally five to seven years or more of relevant aircraft maintenance experience
  • Recent depot-level aircraft maintenance and repair experience
  • Experience repairing mechanical aircraft systems and components
  • Experience working with hydraulic systems
  • Experience with pneumatic systems and aircraft plumbing
  • Experience with aircraft rigging
  • Ability to interpret OEM technical data
  • Ability to follow FAA-approved work package instructions
  • Experience using power and pneumatic hand tools
  • Strong aircraft troubleshooting and repair skills
  • Knowledge of machines and tools including their use, repair and maintenance
  • Knowledge of FAA aircraft maintenance requirements
  • Ability to inspect and install aircraft parts and components
  • Ability to work across multiple technical areas
  • Strong customer service skills

Preferred Qualifications

  • FAA Airframe and Powerplant License
  • Aircraft structures experience
  • Training and demonstrated proficiency on an aircraft type

Working Conditions and Requirements

  • Ability to work safely while following OSHA, EPA, state and federal regulatory requirements
  • Ability to wear a respirator in accordance with OSHA 29 CFR 1910.134 when required
  • Ability to work flexible hours and different shifts when required
  • Subject to random drug and alcohol testing under applicable FAA regulations

General Expectations

  • Follow company values, policies, procedures and departmental requirements
  • Incorporate Lean and P3E processes into daily activities
  • Support continuous improvement of processes and procedures
  • Protect confidential and proprietary information
  • Meet assigned work schedule requirements
  • Perform additional duties as assigned

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have extensive aircraft maintenance experience and are comfortable troubleshooting, repairing, inspecting and testing mechanical aircraft systems and components, apply today to join STS Technical Services as an A&P Mechanic in Fort Lauderdale, Florida.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedAM

Avionics Technicians

|

13 October 2026

|
No comments

Avionics Technician Jobs

STS Technical Services is hiring Avionics Technicians in Fort Lauderdale, Florida.

This role supports depot-level aircraft avionics and electrical maintenance, including troubleshooting, testing, repair, installation and modification of aircraft communication, navigation, radar, instrumentation and flight control systems.

The ideal candidate brings extensive hands-on avionics experience, strong electrical troubleshooting skills and the ability to work from FAA-approved procedures, OEM technical data, wiring diagrams and detailed work package instructions.

Position Overview

The Avionics Technician will inspect, troubleshoot, repair, install and test aircraft avionics and electrical systems in accordance with FAA requirements, applicable regulations and approved maintenance procedures.

This position requires experience with wiring, harness fabrication, electronic components, test equipment and aircraft electrical systems, along with the ability to diagnose complex avionics problems and verify system functionality after repair or installation.

Responsibilities

  • Perform routine and special inspections of aircraft avionics and electrical systems
  • Complete operational and functional checks on navigation systems
  • Inspect and test aircraft communication systems
  • Support flight control system maintenance
  • Inspect instrumentation and pitot-static installations
  • Fabricate aircraft wiring harnesses
  • Install and modify avionics systems
  • Install and modify aircraft electrical systems
  • Determine whether components should be repaired or replaced
  • Identify required repair methods and replacement parts
  • Obtain required parts from Stores or departmental supplies
  • Follow FAA-approved maintenance procedures
  • Use OEM technical data and work package instructions
  • Inspect completed work before signoff
  • Perform required rework
  • Verify repaired components meet established standards and tolerances
  • Perform serviceability testing using OEM-specified test equipment
  • Complete and sign required work package documentation
  • Install digital avionics equipment
  • Interpret avionics and electrical wiring diagrams
  • Perform wire identification and harness fabrication
  • Inspect wiring and cable integrity
  • Work with coaxial cables and fittings
  • Install and repair connector assemblies
  • Adjust, repair or replace malfunctioning components and assemblies
  • Use hand tools, power tools and soldering equipment
  • Install electrical and electronic components, assemblies and aircraft systems
  • Interpret flight test data to diagnose system malfunctions
  • Diagnose systemic performance problems
  • Set up and operate ground support and test equipment
  • Perform functional testing of aircraft electrical and electronic systems
  • Test components and assemblies using circuit testers
  • Use oscilloscopes and voltmeters for troubleshooting
  • Repair, rework and modify worn or defective assemblies, components and systems

Qualifications

  • High school diploma or GED
  • Current FAA Airframe and Powerplant License or FAA Repairman Certificate for Avionics
  • Minimum of five years of recent depot-level aircraft avionics experience
  • Experience repairing aircraft electrical systems
  • Experience with flight control systems
  • Experience with aircraft instrumentation
  • Strong aircraft wiring experience
  • Ability to interpret avionics and electrical wiring diagrams
  • Experience with wire identification
  • Experience fabricating wiring harnesses
  • Experience working with cables, fittings, circuits and connectors
  • Strong troubleshooting and diagnostic skills
  • Experience installing avionics and electrical equipment
  • Ability to select and use appropriate tools and test equipment
  • Knowledge of aircraft equipment maintenance requirements
  • Knowledge of FAA aircraft maintenance procedures
  • Ability to interpret manufacturer and FAA-approved work package instructions
  • Ability to inspect and install aircraft parts and components

Preferred Qualifications

  • FCC License
  • Previous experience working in an executive jet repair facility

Working Conditions and Requirements

  • Ability to work safely while following OSHA, EPA, state and federal regulatory requirements
  • Ability to wear a respirator in accordance with OSHA 29 CFR 1910.134 when required
  • Ability to work flexible hours and different shifts when required
  • Subject to random drug and alcohol testing under applicable FAA regulations

General Expectations

  • Follow company values, policies, procedures and departmental requirements
  • Incorporate Lean and P3E processes into daily activities
  • Support continuous improvement initiatives
  • Protect confidential and proprietary information
  • Meet assigned work schedule requirements
  • Perform additional duties as assigned

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have extensive aircraft avionics experience and are comfortable troubleshooting, repairing, installing and testing aircraft electrical and electronic systems, apply today to join STS Technical Services as an Avionics Technician in Fort Lauderdale, Florida.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedAM

King Air Aircraft Mechanic

|

13 October 2026

|
No comments

Aircraft Mechanic Jobs

STS Technical Services is hiring an experienced King Air Aircraft Mechanic in Moline, Illinois.

This role is designed for seasoned A&P Mechanics with extensive turboprop maintenance experience and a strong background in King Air aircraft. The position combines advanced troubleshooting, inspections, repairs, project leadership and technical mentorship within an FAA-regulated aircraft maintenance environment.

Position Overview

The King Air Aircraft Mechanic will perform advanced maintenance, troubleshooting, servicing and repair of aircraft systems and components, with an emphasis on King Air and other turboprop aircraft.

This position requires at least eight years of aircraft maintenance experience, a current FAA Airframe and Powerplant certificate and the ability to lead maintenance projects while maintaining strict standards for safety, documentation, regulatory compliance and workmanship.

Responsibilities

  • Perform advanced inspections on King Air and other turboprop aircraft
  • Complete aircraft maintenance, servicing and repairs
  • Troubleshoot airframe, engine and component systems
  • Perform functional testing using applicable manufacturer technical data
  • Follow approved aircraft maintenance procedures
  • Lead assigned aircraft maintenance projects
  • Ensure maintenance work scopes are completed safely and efficiently
  • Support established project schedules and quality requirements
  • Interpret technical publications and maintenance data
  • Review and apply service bulletins
  • Follow applicable airworthiness directives
  • Apply relevant FAA regulatory requirements
  • Complete accurate aircraft maintenance records
  • Review maintenance documentation for accuracy and compliance
  • Document discrepancies in the work order system
  • Record troubleshooting results and corrective actions
  • Provide technical guidance to junior technicians
  • Mentor technicians on proper maintenance practices
  • Support accurate maintenance documentation and quality workmanship
  • Follow applicable safety and environmental requirements
  • Maintain regulatory compliance throughout maintenance activities
  • Properly use and maintain tools and equipment
  • Maintain clean and safe work areas
  • Perform other duties as assigned

Qualifications

  • High school diploma or equivalent
  • Minimum of eight years of aircraft maintenance experience
  • Demonstrated experience maintaining and repairing turboprop aircraft
  • Strong working knowledge of FAR Parts 43, 65, 91, 135 and 145
  • Current FAA Airframe and Powerplant certificate
  • Advanced aircraft troubleshooting and diagnostic skills
  • Ability to interpret complex technical data
  • Ability to apply aircraft maintenance procedures and regulatory requirements
  • Strong leadership and decision-making skills
  • Ability to mentor junior technicians
  • Effective communication skills
  • Strong attention to detail
  • Commitment to quality workmanship
  • Strong organizational and project management skills
  • Ability to prioritize work and meet established deadlines

Preferred Qualifications

  • King Air maintenance experience
  • FAA Inspection Authorization

Licenses and Certifications

  • Current FAA Airframe and Powerplant certificate required
  • Ability to obtain and maintain an Airport Operations Area badge
  • Ability to obtain and maintain required Production Inspector designation

Physical Requirements and Work Environment

  • Ability to regularly lift up to 50 pounds
  • Ability to occasionally lift up to 100 pounds
  • Ability to stand for extended periods
  • Ability to bend and kneel frequently
  • Ability to work in confined spaces
  • Ability to work around elevated noise levels
  • Ability to work in varying temperatures
  • Ability to work at heights as required

Additional Requirements

  • Maintain the tools and equipment necessary to perform assigned duties
  • Ability to work various shifts as operational needs require
  • Ability to work overtime when required
  • Ability to travel occasionally
  • Ability to support overnight and short-notice assignments when required

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you’re an experienced A&P Mechanic with strong turboprop maintenance skills and hands-on King Air experience, apply today to join STS Technical Services as a King Air Aircraft Mechanic in Moline, Illinois.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Mechanic

|

13 October 2026

|
No comments

Aircraft Mechanic Jobs - STS Aviation Services

STS Technical Services is hiring experienced Aircraft Mechanics in Moline, Illinois. This is a hands-on role where you’ll be responsible for inspecting, testing, adjusting, repairing, and maintaining airframe and engine systems to keep aircraft safe and airworthy.

Key Responsibilities

  • Perform inspections, servicing, and repairs of a complex nature on various aircraft systems and components
  • Troubleshoot and function test using manufacturer’s technical documents across multiple airframe, engine, and component systems
  • Lead aircraft projects as directed by the Crew Chief and Supervisor
  • Prepare and complete required maintenance and modification documentation in accordance with FAA Airworthiness Regulations, Elliott Aviation Policies and Processes, FAA Approved Repair Station and Quality Control Manuals, and OJT logs
  • Locate and use appropriate technical data to accomplish tasks efficiently and correctly
  • Support, maintain, and comply with all Federal, OSHA, State, and local regulations as well as Elliott Aviation’s Environmental, Health, and Safety Policies and Processes
  • Perform related duties as assigned

Qualifications

  • Ability to attain and retain AOA badge or Airport requirements
  • FAA Inspection Authorization (IA) preferred
  • Must obtain and retain designation as an Elliott Aviation Production Inspector (Blue stamp)
  • High school diploma or equivalent required
  • Thorough knowledge of FARs 43, 65, 91, 135, and 145
  • Aircraft maintenance experience preferred

Licenses

  • Airframe & Powerplant License required

Skills and Competencies

  • Ability to work on a team with both experienced technicians and mentor junior technicians
  • Willingness to learn and take guidance from others
  • Strong communication skills
  • Organizational skills and attention to detail
  • Ability to maintain a safe and clean work environment
  • Mechanical aptitude and a strong desire to work

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with some of the largest names in the aerospace, manufacturing, defense, and industrial industries. Our professional recruitment teams put talented individuals to work at client locations all over the United States.

If you’re looking for work, we’re here to help.

#IndeedAM