Aircraft Structures Technicians

|

26 November 2025

|
No comments

Aircraft Structures Technicians

STS Technical Services is hiring Aircraft Structures Technicians in Macon, Georgia.

Position Summary:

Performs structural repairs and fabrication of parts.  Ability to perform repairs per aircraft SRM and/or engineering dispositions.

Duties & Responsibilities:

  • Follows approved repair/modification procedures for component or aircraft, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
  • Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points
  • Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repairs using test equipment specified in technical manuals.
  • Completes work package documentation by signing/stamping off after finishing all designated operations.
  • Submits completed work to Quality Assurance for final/in progress inspection and recertification of airworthiness.
  • Bolts, screws, or rivets accessories to fasten, support, or hang components and subassemblies.
  • Cuts, trims, and files parts, and verifies fitting tolerances to prepare for installation.
  • Drills holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies.
  • Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
  • Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
  • Able to identify bolts, screws, rivets and various fasteners used to support or assemble components.
  • Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
  • Locates and marks reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
  • Provide information and documentation for engineering requests.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Qualifications:

Education:

  • High School/ GED
  • A&P license preferred

Experience:

  • Prefer at least 5 years experience.
  • Experience doing aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.

Knowledge, Skills & Abilities:

  • Must be able to fabricate parts.
  • Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
  • Repair body or structure of aircraft according to specifications.
  • Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
  • Be proficient in the usage of air powered hand tools and related equipment.
  • Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
  • Ability to work different shifts and flexible hours if required.
  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.

Working Conditions / Environment / Special Requirements:

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Ability to work flexible hours and different shifts if required.
  • Employees will be subject to the random drug and alcohol testing under FAA regulations.
  • Valid Drivers License.
  • Must be able to work in hot/Cold – Indoor/Outdoor.
  • Must be able to lift up to 50 lbs unassisted.
  • Must be able to do work above head.
  • Must be able to work at heights.
  • Must be able to work in confined spaces.
  • Must be able to climb.

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

A&P Technicians

|

26 November 2025

|
No comments

STS Technical Services is hiring A&P Technicians in Nashville, Tennessee.

Job Description:

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Duties & Responsibilities:

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer’s (OEM’s) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.

Qualifications:

Education:

  • High School/ GED
  • A&P

Experience:

  • Required: A & P License; minimum 2 to 5 years’ experience with small aircraft/ general aviation trained in one aircraft type; proficient and demonstrated skill with the aircraft.
  • Several years or actual and recent depot level aircraft maintenance and repair experience is required, (repair of mechanical systems, components, hydraulics, pneumatics, plumbing, rigging etc.); proficiency with interpretation of original equipment manufacturer’s technical data or work package instructions; experience using power or pneumatic hand tools.

Knowledge, Skills & Abilities:

  • Assignments require Standard Knowledge of a Technical Area.
  • Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
  • Performs moderately complex Technical Assignments.
  • Assists Advanced Level Technicians on more complex technical assignments.
  • Knowledge of machines and tools, including their uses, repairs and maintenance.
  • Knowledge of principles and processes for providing customer service.
  • Skilled with repairing, troubleshooting, installing and equipment maintenance.
  • Knowledge of FAA requirements for aircraft maintenance procedures
  • Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.

Working Conditions / Environment / Special Requirements:

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

A&P Hangar-Based Fixed Wing / Helicopter Aviation Maintenance Technician

|

26 November 2025

|
No comments

Location: Show Low, Arizona
Schedule: Full-Time, On-Site

STS Technical Services is hiring an A&P Hangar-Based Fixed Wing / Helicopter Aviation Maintenance Technician to support an industry-leading air medical transport program in Show Low, Arizona. This position offers long-term stability, excellent benefits, and performance-based bonuses while maintaining aircraft that directly support life-saving missions.

Bonus Information

  • $2,000 Sign-On Bonus
  • $5,000 Retention Bonus
  • Competitive pay for qualified candidates (based on experience and offer terms)

Key Responsibilities

  • Perform maintenance, inspection, modification, and repair on airframes, rotors, propellers, engines, and appliances
  • Coordinate with the Lead Maintenance Technician to plan and schedule work
  • Communicate with flight crews to ensure aircraft readiness and operational safety
  • Maintain accurate records of all maintenance activities and parts usage
  • Manage calibrated tools, equipment inspections, and documentation
  • Maintain base facilities and equipment in compliance with company standards
  • Ensure adherence to FAA regulations, maintenance manuals, and safety procedures
  • Perform additional duties as assigned

Required Qualifications

  • High school diploma or equivalent
  • Valid FAA Airframe & Powerplant (A&P) Certificate
  • Minimum of 3 years of turbine rotorcraft or fixed-wing maintenance experience
  • Strong understanding of FARs and maintenance documentation procedures
  • Excellent troubleshooting and communication skills
  • Inspection Authorization (IA) and/or Part 135 experience preferred
  • Experience with Pilatus PC-12 or Bell-407 aircraft a major advantage

Physical Requirements

  • Lift up to 50 pounds unassisted
  • Stand, walk, kneel, climb, and bend for extended periods
  • Work safely in both indoor and outdoor environments with varying temperatures and noise levels

Schedule & Work Conditions

  • Full-time, on-site position
  • Variable schedule based on program requirements
  • On-call availability and overtime may be required

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading organizations across aviation, defense, manufacturing, and industrial sectors. We connect skilled professionals with career opportunities that help shape the future of aviation.

If you’re an experienced A&P Mechanic ready to advance your career and support a vital air medical operation, apply today or call 1-800-359-4787 to speak directly with a recruiter.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Interiors Technicians (Open/Close)

|

26 November 2025

|
No comments

Aircraft Interiors Technician Jobs

STS Technical Services is hiring Aircraft Interiors Technicians in Nashville, Tennessee.

Position Summary:

Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Duties & Responsibilities:

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer’s (OEM’s) technical data, and work package instructions.
  • Consults the Maintenance Lead if technical assistance is needed during the repair process.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
  • Provides supervisor with performance statistics and other operational data, as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.
  • Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Qualifications:

Education:

  • High School/ GED
  • A or P License preferred

Experience:

  • Journeyman Technician Role requiring Intermediate Skills to perform most of the standard tasks within the technical area assigned to.
  • Minimum of 2 years’ experience in at least one aircraft type. Proficiency should be demonstrated in at least one aircraft discipline through prior work experience to include:
  • General Maintenance
  • Structures
  • Interiors
  • Avionics Systems

Knowledge, Skills & Abilities:

  • Assignments require Standard Knowledge of a Technical Area.
  • Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
  • Performs moderately complex Technical Assignments.
  • Assists Advanced Level Technicians on more complex technical assignments
  • Knowledge of machines and tools, including their uses, repairs and maintenance
  • Knowledge of principles and processes for providing customer service.
  • Skilled with repairing, troubleshooting, installing and equipment maintenance.
  • Knowledge of FAA requirements for aircraft maintenance procedures
  • Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.

Working Conditions / Environment / Special Requirements:

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations
  • As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Tools must satisfy minimum tool list.
  • Valid Driver’s License.
  • Must be able to work in hot/Cold – Indoor/Outdoor.
  • Must be able to lift up to 50 lbs unassisted.
  • Must be able to do work above head.
  • Must be able to work at heights.
  • Must be able to work in confined spaces.
  • Must be able to climb.

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Aircraft Painters

|

26 November 2025

|
No comments

Aircraft Painter Jobs

STS Technical Services is hiring Aircraft Painters in Melbourne, Florida.

Position Overview:

The Aircraft Painter is in charge of aircraft and its sub assemblies painting and sealing process including surface preparation, masking, and chemicals handling.  May include limited duties of paint and sealant application.

Job Duties:

  • Prepare surfaces to be painted or sealed as requested by the working instructions using abrasives, solvents, and brushes.
  • Installs masking for strips or other aircraft painting detail.
  • May perform sealant application assuring compliance with technical and quality requirements.
  • May assist with application or installation of logos, symbols, or designs on painted surfaces, according to blueprint specifications, using measuring instruments, stencils, and patterns.
  • Ensures the use of appropriate technical references and tools in performing paint and sealing duties.
  • Perform cleaning and maintenance of all currently used painting or sealing equipment.
  • Sets up ladders, and scaffolding according to regulations and aircraft requirement.
  • Ensures all Federal and local environmental and OSHA/TOSHA regulations are complied with.

Basic Qualifications:

  • Generally 1-3 years of related and recent experience in aeronautical environment.
  • High School or GED familiar
  • Knowledge of preparation and painting of aircraft, support equipment, and allied components.
  • Safety procedures for Chemicals handling.
  • Knowledge of blueprints and painting diagrams.
  • Strong ability on paint spraying
  • Understand technical management and quality assurance procedures.
  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State, and Federal regulations.
  • Must be able to be respirator qualified.

Working Conditions:

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations

About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a recruiting professional directly, please call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Chief Aircraft Inspector

|

26 November 2025

|
No comments

Chief Aircraft Inspector Jobs in New Jersey

Location: Houston, Texas
Pay Range: $90,000 – $110,000

STS Technical Services is hiring a Chief Aircraft Inspector in Houston, Texas. This position requires an experienced aviation maintenance professional with a valid Inspection Authorization (IA) and a proven record of ensuring compliance, quality, and safety in all aspects of aircraft inspection and maintenance.

Key Responsibilities

  • Maintain and update all technical data for articles maintained or altered by the Repair Station, ensuring the latest revisions are secured and accessible
  • Perform detailed inspections of aircraft systems, equipment, and components for conformity to FAA, NAVAIR, and company standards
  • Oversee the installation, repair, and operation of electrical wiring, electronic, hydraulic, pneumatic, fuel, and emergency systems
  • Inspect and verify structural and electrical repairs or modifications in accordance with maintenance Technical Orders (T.O.), TCTOs, work orders, and structural repair manuals
  • Maintain the Repair Station Manual, Quality Control Manual, and Training Manual
  • Perform receiving inspections for incoming raw materials and purchased parts
  • Conduct inspections on machined parts, welds, and electrical assemblies
  • Interpret technical drawings and blueprints accurately
  • Apply shop mathematics and analytical skills to inspection and repair work

Required Qualifications

  • 5–10 years of experience in corporate aviation as an A&P Mechanic
  • Valid Inspection Authorization (IA) required
  • Strong understanding of FAA regulations and compliance procedures
  • Skilled in using inspection tools, measuring devices, mirrors, and flashlights
  • Physically able to climb, kneel, stoop, and stand for extended periods
  • Valid driver’s license with a clean driving record
  • Proficiency in Microsoft Office and related software
  • Excellent communication, organization, and time management skills

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm partnered with leading companies in aerospace, manufacturing, defense, and industrial industries. Our recruiting teams connect skilled aviation professionals with rewarding opportunities across the United States.

If you’re an experienced aviation inspector ready to lead quality operations with precision and integrity, apply today or call 1-800-359-4787 to speak directly with a recruiter.

STS Technical Services is an equal opportunity employer.

#IndeedAM

Senior Helicopter A&P Mechanic

|

26 November 2025

|
No comments

STS Technical Services is hiring Senior Helicopter A&P Mechanics in Phoenix, Arizona. This role is built for someone who wants their work to matter. Every inspection, every repair and every decision you make directly supports missions built around saving lives. If you take pride in precision and want a career with impact, this is that opportunity.

A sign on bonus up to fifteen thousand is available for qualified candidates.

Position Overview

Our client is seeking A&P licensed Aircraft Mechanics with at least two years of certified maintenance experience to support helicopter operations that require fast response and absolute reliability. You will troubleshoot, inspect and maintain high performance aircraft that are trusted in emergency situations where every second counts.

Responsibilities

  • Review and evaluate daily maintenance or inspection needs to ensure aircraft airworthiness.
  • Notify the Lead Mechanic of unusual conditions that affect schedules aircraft availability manpower or technical support.
  • Oversee maintenance of assigned aircraft at field bases including monitoring stock levels and requesting necessary parts.
  • Maintain safety and security of all company assets at field locations.
  • Prepare and certify maintenance documentation aircraft logs inspection forms and reports in accordance with FAA regulations and company standards.
  • Complete entries in maintenance software systems including work packages removals installations and aircraft status updates.
  • Maintain regular communication with the Lead Mechanic and other operational personnel to ensure timely task completion.
  • Manage parts inventory and recommend adjustments when necessary.
  • Maintain and track calibration of company issued tools.
  • Perform additional related duties as assigned.

Qualifications

  • High school diploma required.
  • FAA Mechanic Certificate with Airframe and Powerplant ratings.
  • Minimum of 2 years of experience as a certified aircraft mechanic.
  • Strong communication skills and basic computer proficiency.
  • Ability to pass a physical exam functional capacity assessment lifting up to 100 lbs drug screening and background check.

Additional Requirements for Roving Maintenance Technicians

  • Sheet metal repair and or avionics troubleshooting experience.
  • Ability to travel frequently including with short notice.
  • Ability to work night shifts based on maintenance needs.

Compensation and Benefits

The client offers a competitive total rewards package which may include

  • Competitive pay
  • Shift bonuses and incentives
  • Annual safety bonus
  • Annual employee bonus
  • Comprehensive benefits
  • Sign on bonus up to fifteen thousand

Schedule and Location

  • 7 days on 7 days off schedule
  • Candidates must reside within one hour or 60 miles of the base whichever is greater
  • Travel between bases may be required

Core Competencies

  • Safety Commitment to a zero incident workplace and strict adherence to safety standards
  • Efficiency Effective use of resources to support a high performance organization
  • Quality Delivery of reliable high quality maintenance outcomes
  • Service Dedication to supporting customers communities and team members

About the Work

For more than 40 years our client has supported critical air medical missions throughout the United States. Their teams use advanced aircraft technology rigorous training and a strong safety culture to deliver life saving capability with consistency and care.

Disclaimer

The above statements describe the general nature and responsibilities of the position. They are not intended to represent an exhaustive list of duties skills or qualifications.

About STS Technical Services

STS Technical Services is a top tier staffing firm that partners with some of the largest names in aviation defense manufacturing and industrial operations. We help skilled professionals find long term careers with teams who value expertise pride and performance.

#IndeedAM

Director of Engineering

|

26 November 2025

|
No comments

STS Technical Services is hiring a Director of Engineering in Hebron, Kentucky. This is a senior leadership role for someone who understands aircraft at a deep technical level and knows how to steer an engineering organization toward better performance, higher reliability and stronger operational results. If you want a seat at the table where strategy meets execution, this is where you belong.

The Director of Engineering will guide all aircraft engineering activity for the company. Your work will shape fleet performance, regulatory compliance, technical excellence and long term safety outcomes. You will lead teams, build systems, and influence decisions that directly impact the success of daily operations.

Responsibilities

  • Lead and manage the Engineering Departments including aircraft structures avionics systems
  • Ensure all engineering activities comply with applicable aviation authorities FAA EASA Transport Canada etc. and company policies
  • Develop and implement engineering strategies to optimize fleet reliability availability and cost efficiency
  • Oversee aircraft modifications repairs airworthiness directives ADs and service bulletin SB compliance
  • Coordinate the provisioning of 24 7 technical support to Maintenance Control Line Maintenance and Heavy Maintenance teams
  • Manage relationships with OEMs regulatory bodies and third party vendors
  • Direct the preparation and management of engineering budgets and resource allocation
  • Establish and monitor performance metrics for fleet reliability and engineering productivity
  • Lead root cause analysis and corrective action processes for technical issues and delays
  • Support fleet acquisition lease return and aircraft transition projects
  • Mentor and develop engineering staff ensuring a strong pipeline of technical talent
  • Participate in industry working groups steering committees meetings and conferences

Qualifications

  • Bachelor’s degree in Aerospace Mechanical or Electrical Engineering master’s preferred
  • Professional Engineering PE license or equivalent certification an asset
  • Minimum 10 to 15 years of progressive experience in aircraft engineering or technical operations with at least 5 years in a leadership role
  • Strong knowledge of airworthiness regulations maintenance programs and engineering documentation requirements
  • Proven experience managing fleet reliability modification programs and engineering projects
  • Excellent leadership communication and decision making skills
  • Ability to manage budgets contracts and cross functional teams
  • Strong problem solving mindset with a focus on safety compliance and operational excellence

About STS Technical Services

STS Technical Services is a top tier staffing firm that partners with aviation defense manufacturing and industrial organizations worldwide. We connect accomplished professionals with impactful leadership roles and long term career paths where expertise and accountability matter.

#IndeedAM

Senior Helicopter A&P Mechanic

|

26 November 2025

|
No comments

STS Technical Services is hiring experienced Senior Helicopter A&P Mechanics in Ashtabula, Ohio. Join a life-saving aviation team and take advantage of a sign-on bonus of up to $35,000. Apply today and make a difference.

Every detail matters because every flight can save a life. As an A&P Mechanic, you will play a critical role in maintaining aircraft to the highest standards of safety, reliability, and performance. If you have strong troubleshooting skills, hands-on experience with airframe and powerplant systems, and a passion for excellence, this opportunity allows you to contribute to meaningful, life-saving work.

Key Responsibilities

  • Review and evaluate daily maintenance and inspection requirements to ensure airworthiness.
  • Notify the Lead Mechanic of unusual circumstances requiring schedule changes, aircraft adjustments, or additional manpower or technical assistance.
  • Oversee maintenance at assigned field bases, monitor stock levels, and requisition parts as needed.
  • Ensure the safety and security of company assets at all assigned locations.
  • Prepare reports, requisitions, inventories, and certify aircraft logs and inspection forms in compliance with FAA, manufacturer, and company requirements.
  • Complete maintenance records and system entries accurately.
  • Communicate effectively with the Lead Mechanic, AMBS, and other stakeholders to ensure efficient and timely completion of work.
  • Manage parts inventory and recommend stock level changes as necessary.
  • Maintain company-provided special tools and ensure scheduled calibration.
  • Perform other related duties as assigned.

Qualifications

  • High School diploma or equivalent.
  • FAA Mechanic Certificate with both Airframe and Powerplant ratings.
  • Minimum of 2 years of certified aircraft maintenance experience.
  • Strong communication and computer skills.
  • Must pass a pre-employment physical exam (including strength and flexibility assessment), drug screening, and background check.
  • For members of the roving maintenance team: sheet metal repair and/or avionics troubleshooting/repair experience required.
  • Must be able to travel frequently, sometimes on short notice, and work night shifts as needed.

Compensation and Benefits

  • Competitive pay and benefits package.
  • Shift bonuses, incentives, and annual safety and employee performance bonuses.
  • Sign-on bonus of up to $35,000 for eligible new hires.

Schedule and Location

  • 7 & 7 rotational schedule.
  • Candidates must live within a one-hour drive or 60 miles (whichever is greater) from the assigned base.
  • Travel between bases may be required.

Core Competencies

  • Safety: Commitment to maintaining a zero-incident safety culture.
  • Efficiency: Focused on maximizing productivity and sustainability.
  • Quality: Dedicated to consistent, high-level performance.
  • Service: Committed to supporting customers, communities, and teammates with professionalism and care.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with some of the largest names in the aerospace, manufacturing, defense, and industrial industries. Our recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore.

If you’re ready to join a team that values safety, quality, and mission-driven performance, apply today to become part of STS Technical Services.

#IndeedAM

Senior Aircraft Structures Engineer

|

26 November 2025

|
No comments

Sr. Aircraft Structures Engineer Jobs

STS Technical Services is hiring a Senior Structures Engineer in Hebron, Kentucky. In this role, you’ll play a critical part in ensuring the safety, airworthiness, and reliability of aircraft by developing engineering data, technical documents, and support plans across multiple ATA chapter subjects.

Position Summary

The Senior Structures Engineer is responsible for providing engineering instructions, guidance, and technical support that balance both safety and operational efficiency. This role involves developing solutions to meet Federal Aviation Regulations (FARs), addressing Airworthiness Directives (ADs), evaluating corrosion and fatigue damage, and coordinating with manufacturers, MROs, and regulatory authorities.

Key Responsibilities

  • Provide guidance and technical oversight to Structures Engineering staff.
  • Issue engineering instructions and documentation to support safe, timely aircraft return-to-service.
  • Develop compliance plans and solutions for FARs, ADs, NPRMs, and in-service issues.
  • Liaise with manufacturers, MRO facilities, regulatory authorities, and outside engineering groups.
  • Review the work of consultants, contractors, and MRO Structures Engineers.
  • Evaluate and respond to FAA directives, NPRMs, SBs, SLs, and other in-service notifications.
  • Develop approved or acceptable data and Alternate Methods of Compliance (AMOCs).
  • Support the Corrosion Protection Control Program (CPCP) with corrective action plans.
  • Submit mandatory FAA reports as required.
  • Develop product improvement modifications and support reliability-driven initiatives.
  • Organize and deliver engineering documentation for repairs, alterations, and modifications within set timelines and budgets.
  • Provide 24/7 technical support in cooperation with other Engineering staff.
  • Support the Repair Assessment Program (RAP) and Widespread Fatigue Damage (WFD) initiatives.
  • Initiate and manage maintenance program changes.

Qualifications

  • Bachelor’s degree in Engineering or Technical Engineering required.
  • Minimum of 5 years of experience in Aircraft Structural Engineering.
  • Strong knowledge of ATA chapter subjects: 25, 27 (structural aspects), 51–57, 71 (structural aspects), and 78 (structural aspects).
  • Excellent attention to detail, organizational skills, and commitment to deadlines.
  • Ability to produce accurate, dependable, and consistent work.
  • Strong analytical and problem-solving skills.
  • Flexibility and availability to travel domestically and internationally.
  • Demonstrated ability to provide reliable, thorough technical support.

About STS Technical Services

STS Technical Services is a leading provider of workforce management, engineering, and staffing solutions across the aviation, defense, manufacturing, and industrial industries. With a strong reputation for excellence, we connect top engineering talent with the world’s most advanced organizations.

To learn more and apply, visit: www.ststechnicaljobs.com

#IndeedAM