Field Service Engineer (Structural)

|

13 November 2026

|
No comments

Head of Safety Jobs in Birmingham, UK STS Aviation Services (1)

STS Technical Services is hiring a Field Service Engineer (FSE) in Milwaukee, Wisconsin, to support aircraft maintenance, structural modifications, systems upgrades, on-the-job training and aircraft depot setup at customer sites.

This position requires extensive aircraft maintenance expertise, technical leadership experience and the ability to manage on-site program execution while supporting customer requirements, contractual deadlines and quality standards.

Candidates must have at least 10 years of progressively responsible aircraft maintenance experience, including significant hands-on experience with heavy structural repairs, aircraft modifications and depot-level maintenance.

The position also requires domestic and international travel for assignments lasting up to 12 weeks without return trips.

Position Details

  • Job Title: Field Service Engineer
  • Location: Milwaukee, Wisconsin
  • Company: STS Technical Services
  • Reports To: Director of Engineering and Technical Solutions
  • Travel: Domestic and International, Up to 12 Weeks at a Time Without Return Trips

Position Overview

The Field Service Engineer supports Technical Solutions programs through oversight of aircraft maintenance, structural modifications, system upgrades, on-the-job training and aircraft depot setup at customer sites.

While deployed, the FSE manages on-site work to ensure customer satisfaction and timely delivery within the established scope and quality standards.

This position requires extensive expertise in general aircraft maintenance practices to serve as a Subject Matter Expert (SME).

Duties and Responsibilities

  • Provide technical oversight of customer and/or subcontractor work to verify compliance with contractual requirements, objectives and applicable quality standards.
  • Manage on-site program execution and subcontractors to meet contractual deadlines, control costs and remain within scope.
  • Lead daily and weekly planning meetings with subcontractors and, as needed, customers to address challenges affecting schedule, cost or scope.
  • Ensure worksite compliance with aerospace quality standards, safety regulations and standard industry practices.
  • Facilitate clear communication between the customer, S3 program manager and on-site contractors, consistently representing S3 courteously and professionally.
  • Prepare and submit regular reports to the S3 program manager and customer as required.
  • Informally coach and mentor site staff.
  • Formally address scope changes, out-of-scope repairs and over-and-above work through customer negotiations.
  • Act as S3’s subject matter expert on aircraft systems, general maintenance, structural repairs and structural modifications.
  • Support the business development team with technical input for proposals and program planning.

Required Qualifications and Experience

  • 10 or more years of progressively responsible aircraft maintenance experience, including significant hands-on experience performing or supervising heavy structural repair, aircraft modification and depot-level or unscheduled depot-level maintenance.
  • Prior maintenance leadership experience as an aircraft crew chief, aircraft maintenance supervisor, production superintendent or equivalent, with broad aircraft systems knowledge.
  • Current Airframe and Powerplant (A&P) certification.
  • Ability to travel domestically and internationally for up to 12 weeks at a time without return trips.
  • Expertise in aircraft drawings and technical data, including USAF technical orders, USN NAVAIR publications and U.S. Army technical manuals.
  • Experience managing customer relationships.
  • Significant experience working across cultures with international customers, host-nation personnel and multinational teams.
  • Strong interpersonal, communication, negotiation, diplomacy, documentation and conflict-resolution skills.
  • Ability to make sound decisions and solve problems under pressure.
  • Fluency in American English.

Desired Qualifications

  • Experience with AS 9110 and/or ASA-100.
  • Proficiency in spoken French and Spanish.

About STS Technical Services

STS Technical Services connects skilled professionals with career opportunities across the aerospace, defense, manufacturing and industrial sectors.

We work with employers throughout the United States to recruit experienced professionals for specialized technical positions.

Apply Today

STS Technical Services is hiring a Field Service Engineer in Milwaukee, Wisconsin, to support Technical Solutions programs involving aircraft maintenance, structural modifications, system upgrades and depot-level operations.

If you have the aircraft maintenance expertise, leadership background, A&P certification and travel availability outlined above, we encourage you to apply.

#IndeedAM

CNC Machinist

|

13 November 2026

|
No comments

CNC Machinists

STS Technical Services is hiring an experienced CNC Machinist in Germantown, Wisconsin, to perform machine setup, operation and programming of complex machined components for a variety of industries.

This position requires at least five years of machining experience, strong blueprint-reading skills, working knowledge of geometric dimensioning and tolerancing (GD&T), and the ability to inspect machined components against specified requirements.

We’re looking for a machinist with mechanical aptitude, strong mathematical skills and the ability to mentor and train operators.

Position Overview

The CNC Machinist performs setup, operation and programming of complex machined components for multiple industries.

Responsibilities include setting up documented repeat jobs, running first pieces to print specifications, inspecting parts, interpreting blueprints and supporting production operations.

Essential Duties and Responsibilities

  • Set up repeat jobs that are fully documented.
  • Run first pieces to print specifications.
  • Apply knowledge of programming, with the potential to make program edits or perform programming.
  • Manually inspect parts according to inspection sheet criteria.
  • Read blueprints at a medium to high level and correlate specifications with inspection protocols and documentation.
  • Apply working knowledge of GD&T tolerancing.
  • Run multiple machines simultaneously as a production cell when required.
  • Use advanced shop mathematics, including trigonometry and geometry.
  • Mentor and train operators.
  • Perform other duties as assigned.

An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The responsibilities listed reflect the general and essential functions of the position and are not intended to represent every duty that may be assigned.

Skills and Competencies

  • Mechanical aptitude.
  • Above-average mathematical skills.
  • Willingness to learn.

Education and Qualifications

Education

  • High school diploma.
  • CNC technical diploma preferred.

Experience and Training

  • Minimum of five years of machining experience.

Licenses and Certifications

  • None required.

Technology and Equipment

  • Ability to use a computer.

Physical and Mental Demands

The physical and mental requirements described below are representative of those necessary to perform the essential functions of this position.

For reference, the frequency classifications are:

  • Intermittent: Less than 15% of the time.
  • Occasional: 15% to 45% of the time.
  • Frequent: 50% to 75% of the time.
  • Continuous: More than 75% of the time.

Position requirements include:

  • Frequent repetitive bending and twisting.
  • Occasional walking, operating machines with the feet, climbing or balancing, stooping, kneeling, crouching or crawling, reaching above the shoulders and moving from place to place.
  • Continuous standing for up to 10 hours.
  • Intermittent sitting and talking, frequent listening and frequent use of hands to finger, handle or touch.
  • Close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.
  • Occasional lifting of up to 50 pounds.
  • Frequent lifting of up to 30 pounds, including moving parts from material storage and moving parts into and out of the work area.

Working Environment

This position operates in a factory environment.

Working conditions include:

  • Occasional exposure to wet or humid conditions.
  • Occasional exposure to toxic or caustic chemicals.
  • Frequent exposure to fumes or airborne particles.
  • Frequent work near moving mechanical parts.
  • A loud working environment.

These conditions are representative of those encountered while performing the essential functions of the position. The description is not intended to include every condition or activity that may be associated with the role.

About STS Technical Services

STS Technical Services connects skilled professionals with career opportunities across the aerospace, defense, manufacturing and industrial sectors.

We work with employers throughout the United States to recruit experienced professionals for technical and manufacturing positions.

Apply Today

If you’re an experienced CNC Machinist looking for an opportunity in Germantown, Wisconsin, and have the machining, blueprint interpretation and inspection skills outlined above, we encourage you to apply.

STS Technical Services is hiring. Apply today.

#IndeedSTS

Senior Mechanic

|

13 November 2026

|
No comments

Technical Illustrator

STS Technical Services is hiring a Senior Mechanic in Hiram, Georgia, to support equipment repair, calibration, maintenance and troubleshooting within a hands-on manufacturing environment.

This role is ideal for a mechanically skilled professional with experience working with hydraulic, electrical, gas and diesel systems. The Senior Mechanic will also support equipment diagnostics and repairs while helping Assemblers strengthen their troubleshooting and maintenance skills.

Position Overview

The Senior Mechanic performs equipment repairs, calibration and maintenance while supporting equipment diagnosis and troubleshooting activities.

This position requires basic knowledge of DC electricity and hydraulics, familiarity with diagnostic tools and the ability to follow written and verbal work instructions while maintaining established quality and safety standards.

Responsibilities

  • Complete equipment repairs and service requirements outlined in sales change orders
  • Install equipment accessories including decals, mud flaps, cameras and lights
  • Support equipment diagnosis and repair activities
  • Direct and assist Assemblers with troubleshooting and equipment maintenance
  • Follow verbal and written work instructions
  • Maintain attention to detail and adhere to established quality standards
  • Apply basic knowledge of DC electricity and hydraulic systems
  • Read and understand basic technical prints
  • Use multimeters, pressure testers, analyzers and related diagnostic tools
  • Use an iPad or laptop to document findings and enter required information
  • Learn to operate a forklift as required
  • Assist with inventory accuracy through data entry
  • Maintain a clean and safe work environment
  • Follow established procedures, rules and safety requirements
  • Maintain regular and reliable attendance
  • Work overtime and extended schedules as required
  • Perform other assigned duties and responsibilities

Qualifications

  • High school diploma or GED
  • At least one year of experience working with hydraulic, electrical, gas and diesel systems
  • Basic mechanical aptitude
  • Strong math skills
  • Basic knowledge of DC electrical systems
  • Basic knowledge of hydraulic systems
  • Ability to read and understand basic technical prints
  • Basic computer skills
  • Ability to use an iPad or laptop for data entry
  • Basic understanding of multimeters, pressure testers and analyzers
  • Ability and willingness to work overtime as needed, including evenings, weekends and holidays
  • Ability to maintain regular and reliable on-site attendance

Preferred Qualifications

  • Strong organizational and communication skills
  • Ability to manage multiple responsibilities
  • Good analytical and troubleshooting skills
  • Positive, team-oriented attitude
  • Willingness to evaluate opportunities to improve safety and performance
  • Continuous improvement mindset
  • Willingness to learn

Physical Requirements

  • Ability to stand for extended periods
  • Ability to walk long distances throughout the workday
  • Ability to stoop and work in low positions
  • Ability to lift within established safe and permissible limits

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have hands-on mechanical experience and are ready to support equipment repair, maintenance and troubleshooting operations, apply today to join STS Technical Services as a Senior Mechanic in Hiram, Georgia.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedSTS

Senior Mechanic

|

13 November 2026

|
No comments

Technical Illustrator

STS Technical Services is hiring a Senior Mechanic in Terre Haute, Indiana, to support equipment repair, calibration, maintenance and troubleshooting within a hands-on manufacturing environment.

This role is ideal for a mechanically skilled professional with experience working with hydraulic, electrical, gas and diesel systems. The Senior Mechanic will also support equipment diagnostics and repairs while helping Assemblers strengthen their troubleshooting and maintenance skills.

Position Overview

The Senior Mechanic performs equipment repairs, calibration and maintenance while supporting equipment diagnosis and troubleshooting activities.

This position requires basic knowledge of DC electricity and hydraulics, familiarity with diagnostic tools and the ability to follow written and verbal work instructions while maintaining established quality and safety standards.

Responsibilities

  • Complete equipment repairs and service requirements outlined in sales change orders
  • Install equipment accessories including decals, mud flaps, cameras and lights
  • Support equipment diagnosis and repair activities
  • Direct and assist Assemblers with troubleshooting and equipment maintenance
  • Follow verbal and written work instructions
  • Maintain attention to detail and adhere to established quality standards
  • Apply basic knowledge of DC electricity and hydraulic systems
  • Read and understand basic technical prints
  • Use multimeters, pressure testers, analyzers and related diagnostic tools
  • Use an iPad or laptop to document findings and enter required information
  • Learn to operate a forklift as required
  • Assist with inventory accuracy through data entry
  • Maintain a clean and safe work environment
  • Follow established procedures, rules and safety requirements
  • Maintain regular and reliable attendance
  • Work overtime and extended schedules as required
  • Perform other assigned duties and responsibilities

Qualifications

  • High school diploma or GED
  • At least one year of experience working with hydraulic, electrical, gas and diesel systems
  • Basic mechanical aptitude
  • Strong math skills
  • Basic knowledge of DC electrical systems
  • Basic knowledge of hydraulic systems
  • Ability to read and understand basic technical prints
  • Basic computer skills
  • Ability to use an iPad or laptop for data entry
  • Basic understanding of multimeters, pressure testers and analyzers
  • Ability and willingness to work overtime as needed, including evenings, weekends and holidays
  • Ability to maintain regular and reliable on-site attendance

Preferred Qualifications

  • Strong organizational and communication skills
  • Ability to manage multiple responsibilities
  • Good analytical and troubleshooting skills
  • Positive, team-oriented attitude
  • Willingness to evaluate opportunities to improve safety and performance
  • Continuous improvement mindset
  • Willingness to learn

Physical Requirements

  • Ability to stand for extended periods
  • Ability to walk long distances throughout the workday
  • Ability to stoop and work in low positions
  • Ability to lift within established safe and permissible limits

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have hands-on mechanical experience and are ready to support equipment repair, maintenance and troubleshooting operations, apply today to join STS Technical Services as a Senior Mechanic in Terre Haute, Indiana.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedSTS

A&P Mechanics

|

13 November 2026

|
No comments

STS Line Maintenance is hiring A&P Mechanics in Fort Myers, Florida.

Position Summary:

STS Line Maintenance is looking for highly motivated Aircraft Maintenance Professionals to help us grow our line maintenance station in Ft Myers FL (RSW).  The A&P Aircraft Maintenance Technician supports the daily needs of the maintenance operations for our customers and ensures an outstanding experience by providing top-level service.

STS Line Maintenance is one of the largest line maintenance support providers in the United States, and we pride ourselves in providing high quality and reliable aircraft maintenance support  throughout our extensive, rapid-response, nation-wide network

Job Responsibilities & Duties:

  • This position reports directly to the Line Maintenance Station Manager and Station Leads. Candidate will work in close partnership with the field airlines, flight crew and other Aircraft Maintenance Controllers.
  • The candidate will ensure aircraft are maintained to airworthiness standards prescribed by applicable regulations, airworthiness directives, company policies and best practices.
  • Inspect, test, troubleshoot, adjust and repair different transport category aircraft airframes and engines using hand tools and test equipment.
  • Maintain the highest level of quality and integrity.
  • Adjust, repair or replace defective components based on analysis of test results while following maintenance manuals, schematics, handbooks and other technical documentation.
  • Use precision instruments and equipment to measure parts for wear and repair or replace as required.
  • Other duties as may be deemed necessary.
  • Able to work outdoors and in inclement weather as required.
  • Work will be performed on various Commercial and Large Regional aircraft, including but not limited to the Airbus A320, CRJ, and Embraer 170.

The Ideal Candidate Requirements & Qualification:

  • Must hold a current and valid FAA Airframe and Powerplant certifications  (A&P) with no history of infractions.
  • Recent A&P experience on turbine powered aircraft considered a plus.
  • Own set of standard line maintenance tools (calibrated & specialty tooling will be provided).
  • Self-motivated with a positive attitude while being able to perform your job with minimal supervision.
  • With or without accommodations, employees must be able to work standing, climb ladders and stairs and must be able to lift 50 lbs. unassisted.
  • Must be able to pass background check as well as drug & alcohol test. In addition, he / she must be able to obtain customs & border patrol clearance.
  • Must have basic-to-mid-level computer & organizational skills.
  • Experience working under a FAA approved Part 145 repair station or Part 135 experience is highly desired.
  • Inspection Authorization (IA) license is a plus.
  • Must be able to read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing, or replacing, malfunctioning and/or damaged components.
  • Ability to work with little supervision while being able to trouble shoot and repair systems on aircraft airframes and engine(s). This includes electrical, mechanical and hydraulic.
  • Versatility and flexibility will be important as the schedule could include days, nights, weekends and holidays.
  • Superior customer focus, communication skills, and work ethic with a commitment to excellence.

Rate Of Pay:

  • Starting Rate of pay is determined by previous experience and formal training, and will range between $32 to $40 per hour.
  • Yearly raises are available upon evaluation.

Benefits:

  • Full Time: PTO, Health Insurance, 401K. No Benefits for Part Time.

About STS Line Maintenance:

STS Line Maintenance operates 51 line maintenance stations throughout the United States, Bahamas, United Kingdom and France.

At each of these stations, our team(s) offer a full range of support services, FAA / DER engineering assistance, AOG response teams and enhanced reliability through rapid response times. Skilled mechanics stand ready to handle RON maintenance, turnaround checks, non-routine discrepancy reports and ground equipment maintenance via scheduled or on-call action.

To learn more about STS Line Maintenance and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-359-4787 ext. 9176.

#IndeedAM

Production Technician

|

13 November 2026

|
No comments

Production Associate Jobs in York, Pennsylvania (1)

STS Technical Services is hiring Production Technician in York, Pennsylvania to support operations at Harley-Davidson’s York Vehicle Operations facility.

If you want to work on iconic motorcycles in a fast-paced manufacturing environment, this is your opportunity. We are actively hiring team members to support assembly operations at one of the most recognized motorcycle brands in the world.

Company Overview

Harley-Davidson represents more than machines. It represents adventure, craftsmanship, and a culture built around freedom and performance. York Vehicle Operations plays a critical role in producing Softail and Touring models, limited edition custom motorcycles, and replacement parts for current and legacy platforms.

Position Summary

Production Associates perform manufacturing and assembly tasks in a high-speed production environment. While this role may include material handling, equipment loading and unloading, and related production duties, current openings are focused on assembly operations.

This is a temporary agency position supporting bargaining unit work. Temporary agency employees are not covered by the union collective bargaining agreement.

Key Responsibilities

  • Operate pre-set equipment for repetitive production tasks
  • Assemble components by placing parts in specified relationships
  • Inspect parts for fit, function, and cosmetic quality
  • Perform simple equipment adjustments as required
  • Align components and tighten fasteners
  • Perform general servicing and gauging operations
  • Use a variety of hand and production tools
  • Inspect and evaluate parts, components, and assemblies throughout the production process
  • Report defects during all phases of manufacturing
  • Stand for extended periods in a high-speed manufacturing environment

Qualifications

Candidates must meet one of the following requirements:

  • High School Diploma
  • GED
  • One year of work experience
  • Manufacturing Skills Standard Certification (MSSC)

Candidates must be comfortable working in a fast-paced production environment and performing repetitive assembly tasks.

Schedule

  • 1st Shift
  • Monday through Thursday
  • 6:30 AM to 5:00 PM

Temporary agency employees must be able to work day shift hours and are not guaranteed a minimum number of hours. Future night shift opportunities may become available.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading manufacturers, aerospace companies, defense contractors, and industrial organizations nationwide. We connect skilled professionals with high-impact opportunities and provide support throughout the hiring process.

If you are ready to build world-class motorcycles in York, Pennsylvania, apply today.

STS Technical Services is an Equal Opportunity Employer.

#IndeedSTS

Large Machinist

|

13 November 2026

|
No comments

Machinist Jobs

STS Technical Services is hiring a Large Machinist in Mount Airy, North Carolina, to support precision manufacturing operations using large-format CNC equipment.

This hands-on role is designed for experienced machinists who can read complex blueprints, program and set up CNC equipment, select tooling and fixtures, and run large machining centers from initial setup through finished-part inspection.

Position Overview

The Large Machinist sets up and operates large CNC machining equipment used to produce precision metallic components.

This position requires strong blueprint-reading skills, CNC programming and setup experience, mechanical aptitude and the ability to make machining adjustments based on tolerances, materials and production requirements.

Responsibilities

  • Review blueprints, manuals, specifications and sample parts to determine dimensions, tolerances, machining sequences and setup requirements
  • Select existing CNC programs or create programs and tool setups from scratch
  • Determine tooling requirements based on tolerances, material type, quantity and available resources
  • Measure, mark and scribe dimensions and reference points on materials and workpieces
  • Select, align and secure holding fixtures
  • Install and position cutting tools, attachments, accessories and materials for milling operations
  • Select, install and adjust tools within automatic tool-change magazines for lathe operations
  • Prepare and load parts into machining centers
  • Operate large CNC machining centers through complete production cycles
  • Monitor machining operations for malfunctions and out-of-tolerance conditions
  • Adjust machine controls as required
  • Unload completed parts after machining
  • Follow written, verbal, diagram and schedule-based work instructions
  • Troubleshoot practical machining and setup issues on the shop floor

Qualifications

  • High school diploma or GED
  • Three to five years of related machining experience
  • At least one year of CNC programming and setup experience
  • An equivalent combination of education and experience may be considered
  • Ability to read and interpret complex blueprints
  • Experience using precision measuring tools
  • Strong mechanical aptitude
  • Strong math skills
  • Ability to perform standard and metric calculations
  • Working knowledge of basic algebra and geometry
  • Ability to solve practical machining and production problems
  • Ability to work from written, verbal, diagram and schedule instructions

Work Environment

This is an active shop-floor position that requires regular standing and lifting up to 50 pounds.

Employees may be exposed to dust, oil, moving mechanical equipment and elevated noise levels while working in a hands-on precision manufacturing environment.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have experience programming, setting up and operating large CNC machining equipment, apply today to join STS Technical Services as a Large Machinist in Mount Airy, North Carolina.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedSTS

Traveling Welder

|

13 November 2026

|
No comments

STS Technical Services is hiring Welders in Homer City, Pennsylvania. In this role, you’ll perform precision welds on component parts per customer specifications and dimensions. Welders will also inspect all completed welds for non-conformities, assemble parts using fixtures or blueprints, and ensure work meets customer design requirements. Candidates must be able to pass welding certifications on all procedures outlined within customer specifications.

Job Requirements

Education:

  • High school diploma or general education degree (GED)

Experience:

  • 5 to 10 years of welding experience required

Responsibilities

  • Proficient at welding and assembly provided by all levels of assemblers
  • Use welding tools to weld metals
  • Enter accurate data into job tracking and quality software programs
  • Proficiently uses inspection tools, records the measurements on inspection sheets and understands the impact dimensions have on part quality and function
  • Performs all weld functions in the production shop, excluding robotic applications
  • Maintains a minimum quality yield performance of 99% when fully trained
  • Completes traceability requirements
  • Must pass weld assessment test given by the Company
  • Ability to weld all metals and any combination of metals
  • Ability to select and use the correct wire for the metals being welded
  • Ability to repair parts that fail inspection
  • Ability to weld product that is not fixtured
  • Ability to weld product that is located on positioners
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
  • Ability to read and comprehend simple instructions, short correspondence, and memos
  • Ability to deal with problems involving a few concrete variables in standardized situations
  • Ability to foster a positive team environment
  • Ability to effectively communicate with customers, co-workers and management

Safety Requirements & Physical Demands

  • Sit, stand, and walk for extended periods of time
  • Read, see, hear, and speak English
  • Lift, push, pull, and carry up to 50 pounds regularly; larger amounts with assistance
  • Operate cranes and forklifts as needed
  • Work in a warehouse and fabrication shop environment with exposure to dirt, dust, fumes, smoke, and loud noises
  • Frequent exposure to extreme heat
  • Use basic hand tools, saws, grinders, mills, lathes, bending tools, drill press, band saw, scale, stamping tool, and welding tools
  • Wear required PPE at all times (gloves, safety glasses, ear protection, and steel-toed boots)
  • Follow all safety policies and identify hazards
  • Participate in safety training programs and continuous improvement efforts

About STS Technical Services

STS Technical Services is a leading provider of staffing and workforce solutions to the aerospace, defense, manufacturing, and industrial sectors. With over 30 years of experience, we deliver specialized talent to meet our clients’ needs and help professionals grow their careers in dynamic industries.

#IndeedSTS

Traveling Machinist

|

13 November 2026

|
No comments

Machinist Jobs

STS Technical Services is hiring Traveling Machinists in Homer City, Pennsylvania. In this role, you will set up and operate CNC and conventional machining equipment to fabricate precision metal components according to specifications. You will also perform preventive maintenance and ensure all parts meet quality standards through inspection and verification.

Key Responsibilities

  • Collaborate with engineers, programmers, and production staff to resolve machining or assembly problems.
  • Participate in training and evaluation of team members.
  • Review blueprints, setup sheets, manuals, and sample parts to determine dimensions, tolerances, and sequence of operations.
  • Measure and mark reference points on materials and workpieces for accurate machining.
  • Select, align, and secure holding fixtures, cutting tools, attachments, and materials for use with mills, lathes, borers, grinders, and shapers.
  • Calculate and set machine controls for speed, feed rate, coolant flow, and cutting depth.
  • Operate CNC and conventional machines to perform trial runs and verify setup accuracy.
  • Monitor machine operations to detect malfunctions or out-of-tolerance conditions, making adjustments as needed.
  • Verify finished parts meet blueprint and specification requirements.
  • Install replacement parts, perform functionality tests, and ensure proper performance of equipment.
  • Maintain 5S standards for cleanliness, organization, and efficiency within the department.

Safety Requirements and Physical Demands

  • Must be able to sit, stand, and walk for extended periods.
  • Must be able to read, see, hear, and speak English clearly.
  • Frequent lifting, pushing, and pulling up to 50 pounds; heavier loads with assistance.
  • May be required to operate cranes and forklifts as needed.
  • Work performed in a warehouse and fabrication shop environment with exposure to dust, fumes, and loud noise.
  • Occasional exposure to outdoor elements such as heat, cold, and precipitation.
  • Must use tools including hand tools, saws, grinders, mills, lathes, and drill presses.
  • Must wear Personal Protective Equipment (PPE) including gloves, safety glasses, ear protection, and steel-toed boots (provided by the company except boots).
  • Follow all company safety policies and procedures.
  • Actively identify hazards, report issues, and participate in safety training programs.

Requirements

Education:

  • High School Diploma or GED required

Experience:

  • Minimum of 3 years of machinist experience or equivalent
  • Experience with FANUC controls and horizontal boring machining required

Other Abilities:

  • Ability to work independently with limited supervision.
  • Strong communication and teamwork skills.
  • Able to interpret blueprints, technical drawings, and work instructions.
  • Flexibility in working hours and willingness to work overtime as needed.
  • Strong math and measurement skills.
  • Positive, team-oriented attitude.

Shift:

  • Starting on 2nd shift initially but may move to 1st shift
    1st shift – 5:00 AM to 1:00 PM or 3:00 PM
    2nd shift – Sunday through Thursday 6:00 PM to 2:00 AM, 4:00 PM start on Thursdays.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm partnered with some of the largest names in aerospace, manufacturing, defense, and industrial industries. Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore.

If you want to speak with a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedSTS

Quality Manager (Final Assembly Line)

|

13 November 2026

|
No comments

Quality Manager Jobs

STS Technical Services is hiring an experienced Quality Manager in Stuart, Florida, to lead production quality and regulatory compliance for a new aircraft Final Assembly Line.

This role is responsible for overseeing the Quality Management System, maintaining compliance with EASA Part-21G requirements and approved production procedures, and ensuring aircraft, assemblies, components and manufacturing processes meet applicable quality and conformity standards.

The Quality Manager will support aircraft release and initial airworthiness activities, drive continuous improvement and help establish a strong quality culture across production and engineering operations.

Position Overview

The Quality Manager will lead production quality activities while maintaining the Quality Management System and ensuring compliance with applicable aerospace regulatory requirements.

This position requires extensive aerospace manufacturing or aircraft production quality experience, strong leadership capabilities and a thorough understanding of product conformity, audits, nonconformance management and corrective action processes.

Responsibilities

  • Implement and maintain the Quality Management System in accordance with EASA Part-21G requirements and approved production procedures
  • Oversee production inspections and conformity verification
  • Manage production quality controls
  • Support applicable aircraft release activities
  • Lead root cause analysis for production and quality issues
  • Develop and manage corrective and preventive actions
  • Resolve nonconformances and support efforts to prevent recurrence
  • Manage internal quality audits
  • Support external regulatory audits
  • Support customer audits
  • Ensure audit findings are addressed and closed in a timely manner
  • Monitor quality metrics and production performance
  • Identify opportunities to reduce defects and rework
  • Manage production quality risks
  • Lead Lean, Six Sigma and other continuous improvement initiatives
  • Manage and develop quality personnel
  • Establish competency requirements for quality team members
  • Provide training and development
  • Promote accountability across production and engineering teams
  • Serve as a key quality contact for regulatory authorities as applicable
  • Support customer and internal leadership quality requirements

Qualifications

  • Bachelor’s or master’s degree in aerospace, quality management, engineering or a related field
  • Significant quality management experience in aerospace manufacturing or aircraft production
  • Demonstrated leadership experience managing quality teams
  • Experience leading production quality functions
  • Experience working under EASA Part-21G or an equivalent aerospace production regulatory framework
  • Strong knowledge of Quality Management Systems
  • Experience with internal and external quality audits
  • Strong understanding of product conformity requirements
  • Experience managing nonconformances
  • Experience with root cause analysis and corrective action processes
  • Strong analytical and problem-solving skills
  • Excellent communication and leadership skills
  • Proficiency with Microsoft Office
  • Experience using quality management systems or related software
  • Ability to travel to Europe for up to three months during the transfer phase

Preferred Qualifications

  • Experience working directly with aviation regulatory authorities
  • Six Sigma Green Belt certification
  • Six Sigma Black Belt certification
  • Lean Manufacturing training
  • Experience supporting new aircraft production programs
  • Experience with manufacturing transfers
  • Experience supporting certification activities
  • Experience establishing or improving quality processes within a new or expanding aircraft manufacturing facility

Physical Requirements and Work Environment

  • Ability to work in both office and aircraft manufacturing environments
  • Ability to sit, stand and walk as required
  • Ability to reach and perform visual inspection activities
  • Ability to lift up to 50 pounds
  • Ability to wear required personal protective equipment in manufacturing areas

Reasonable accommodations may be made for qualified individuals with disabilities.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have extensive aerospace quality management experience and are ready to lead production quality and regulatory compliance for a new aircraft Final Assembly Line, apply today to join STS Technical Services as a Quality Manager in Stuart, Florida.

#IndeedAM