Archive

CNC Operator

|

14 September 2026

|
No comments

CNC Operator Jobs

STS Technical Services is hiring a CNC Operator in West Point, Mississippi, to support precision metal cutting and fabrication operations in a manufacturing environment.

This role is responsible for setting up and operating CNC equipment, loading programs, verifying cut quality, inspecting finished parts and maintaining production accuracy in accordance with engineering drawings, work orders and Quality Management System requirements.

Position Overview

The CNC Operator supports daily production by safely operating computer-numerically controlled cutting equipment used to produce precision metal components.

This position requires hands-on CNC experience, the ability to read engineering drawings and GD&T callouts, familiarity with G-code and a strong understanding of material handling, inspection, preventive maintenance and shop safety.

Machine Setup and Operation

  • Set up and operate CNC equipment according to daily work orders and router packages
  • Load and interpret CNC programs using G-code or machine-native formats
  • Make minor program edits as authorized
  • Select and install the correct consumables based on material type and thickness
  • Install tips, electrodes, shields and swirl rings as required
  • Set plasma cutting parameters, including amperage, cut speed, pierce delay and gas pressure
  • Nest parts using CAM or nesting software to maximize material utilization and reduce scrap
  • Perform test cuts before beginning full production runs
  • Verify dimensional accuracy before releasing parts for production

Quality and Inspection

  • Perform in-process inspections using calipers, squares and tape measures
  • Verify part dimensions against engineering requirements
  • Read and interpret engineering drawings
  • Interpret GD&T callouts and cut-to-size specifications
  • Identify, tag and segregate nonconforming material
  • Initiate nonconformance documentation when required
  • Maintain first-article documentation
  • Complete traveler sign-offs according to QMS procedures
  • Monitor cut quality, including dross, bevel angle, kerf width and surface condition

Material Handling

  • Stage plate, sheet and structural material at the machine
  • Use overhead cranes, forklifts or manual handling methods as required
  • Verify material certifications before cutting
  • Confirm heat and lot traceability
  • Label, handle and store completed parts to protect them from damage
  • Maintain part identification throughout production
  • Return and properly store remnant material
  • Update material inventory when required

Preventive Maintenance and Housekeeping

  • Perform daily pre-shift machine inspections
  • Check water table levels
  • Maintain clean machine rails
  • Verify Z-axis calibration
  • Inspect consumable condition
  • Remove slag, spatter and water table debris according to preventive maintenance schedules
  • Lubricate drive components as required
  • Check drive system alignment according to OEM maintenance schedules
  • Record machine downtime
  • Track consumable usage
  • Document maintenance activities
  • Maintain a clean and organized work area in accordance with 5S standards

Safety Responsibilities

  • Follow all Lockout/Tagout procedures before maintenance or consumable changes
  • Wear required personal protective equipment
  • Maintain proper ventilation and fume extraction during cutting operations
  • Report unsafe conditions immediately
  • Report near misses and workplace incidents to supervision
  • Follow all established shop safety requirements

Minimum Qualifications

  • High school diploma or GED
  • At least two years of hands-on CNC experience in a manufacturing environment
  • Ability to read and interpret engineering drawings
  • Ability to read material certifications
  • Basic math skills involving fractions, decimals and measurement conversions
  • Proficiency using calipers, tape measures and combination squares
  • Ability to safely operate an overhead crane and/or forklift
  • Ability to obtain required equipment certification if not already certified

Preferred Qualifications

  • Technical or vocational training in welding, machining or fabrication
  • Experience using nesting software such as Hypertherm ProNest, SigmaNEST or equivalent
  • Familiarity with Hypertherm plasma cutting systems
  • Familiarity with Lincoln Electric plasma cutting systems
  • Familiarity with ESAB plasma cutting systems
  • Experience working in defense, aerospace or ISO 9001-certified manufacturing environments
  • Knowledge of mild steel, stainless steel, aluminum and high-strength steel alloys
  • Familiarity with basic G-code editing
  • Familiarity with CNC controller interfaces such as Burny, Hypertherm Phoenix or similar systems
  • Overhead crane or forklift certification

Physical Requirements

  • Ability to frequently lift and carry up to 50 pounds
  • Ability to occasionally lift or move 51 to 100 pounds with assistance or equipment
  • Ability to stand and walk on concrete flooring throughout the shift
  • Ability to frequently bend, stoop and reach
  • Ability to work around heat, noise and fumes
  • Manual dexterity required for precise machine adjustments

Work Environment

This position operates in a manufacturing shop environment with exposure to metal fumes, UV and IR arc light, elevated noise levels and hot work surfaces.

Temperatures may vary seasonally. Required personal protective equipment must be worn while working on the shop floor.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have CNC cutting experience and are ready to support precision metal fabrication operations, apply today to join STS Technical Services as a CNC Operator in West Point, Mississippi.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedSTS

Traveling Field Service Engineer

|

14 September 2026

|
No comments

Field Service Engineer Jobs

STS Technical Services is hiring a Traveling Field Service Engineer to install, troubleshoot, maintain and support Thermal Processing and Aqueous Washing Equipment at customer locations.

This is a highly travel-intensive position requiring 85 to 95 percent domestic and international travel. The Field Service Engineer will provide hands-on technical support, perform equipment startups and maintenance, troubleshoot mechanical and electrical issues and work directly with customers to help maximize equipment uptime.

Position Overview

Under the direction of the Field Service Manager, the Field Service Engineer provides on-site technical assistance for Thermal Processing and Aqueous Washing Equipment.

This position supports equipment installation, startup, troubleshooting, repair, testing and routine maintenance. The Field Service Engineer will also document service activities, provide customer training and collaborate with Engineering, Manufacturing and other technical personnel to resolve equipment issues.

Responsibilities

  • Install, configure, troubleshoot and maintain Thermal Processing and Aqueous Washing Equipment
  • Identify, analyze and repair equipment failures
  • Replace and install components or parts as required
  • Inspect and test completed work to ensure quality and safety requirements are met
  • Prepare detailed service reports documenting visits, equipment issues and troubleshooting activities
  • Log and track maintenance activities
  • Work directly with customers to address technical concerns
  • Conduct feasibility studies and apply technical knowledge to equipment problems
  • Escalate complex technical issues when required
  • Perform equipment startup testing
  • Train customers on equipment features and general maintenance requirements
  • Track newly installed Thermal Processing and Aqueous Washing Equipment
  • Coordinate with Engineering, Manufacturing and customer personnel to define and resolve problems
  • Work from intermediate mechanical and electrical drawings
  • Support equipment compliance with customer specifications and established quality standards
  • Maintain good housekeeping practices
  • Follow established safety guidelines and procedures
  • Provide daily project reports and updates to the Field Service Manager and other team members
  • Test and debug OEM equipment before shipment
  • Support work on the production floor when required
  • Travel to customer sites to perform field service activities
  • Organize work around scheduled commitments and established budgets
  • Perform other duties as assigned

Qualifications

  • High school diploma or GED
  • At least two years of related experience with a mechanical and electrical background in Thermal Processing capital equipment
  • Ability to troubleshoot mechanical and electrical equipment
  • Ability to read and work from mechanical and electrical drawings
  • Ability to accurately record and document technical information
  • Strong verbal and written communication skills
  • Strong interpersonal skills
  • Ability to manage multiple responsibilities in a fast-paced environment
  • Strong decision-making skills
  • Proficiency with general office software
  • Experience with Microsoft Office and/or MRP/ERP systems
  • Ability to follow verbal, written and diagram-based instructions
  • Basic mathematical skills involving whole numbers, fractions and decimals

Preferred Qualifications

  • Associate degree in Industrial Engineering, Electrical Engineering, Mechanical Engineering or a related field
  • Manufacturing Quality Control experience

Travel Requirements

  • Ability to travel domestically and internationally 85 to 95 percent of the time
  • Ability to travel on short notice
  • Availability to work weekends when required
  • Availability to work holidays when required

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have a strong mechanical and electrical background and are comfortable traveling extensively to install, troubleshoot and maintain industrial equipment, apply today to join STS Technical Services as a Traveling Field Service Engineer.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedSTS

Mechanical Engineer

|

14 September 2026

|
No comments

Mechanical Engineer Jobs

STS Technical Services is hiring a Mechanical Engineer in Milwaukee, Wisconsin, to support the design and development of heat processing and process cleaning equipment.

This role is ideal for an engineer with three to five years of mechanical or structural design experience who can work with 3D CAD tools, develop detailed drawings, support structural analysis and help validate systems through testing.

Position Overview

Under the direction of the Engineering Manager, the Mechanical Engineer applies mechanical and structural engineering principles to the design and development of heat processing and process cleaning equipment.

The position supports routine and intermediate engineering assignments while continuing to develop more advanced applied engineering skills.

Responsibilities

  • Prepare final drawings from engineering sketches, specifications and supporting documentation
  • Develop layouts for systems, components and parts
  • Create multiple drawing views showing component relationships
  • Identify dimensions, angles, curvatures, tolerances and materials
  • Serve as the mechanical technical lead on assigned intermediate projects
  • Use computer-assisted engineering and design software to complete engineering tasks
  • Occasionally oversee work assigned to Mechanical Engineers and Designers
  • Plan and organize structural analysis activities
  • Support compliance with structural integrity and stability requirements
  • Develop and document structural requirements used to establish system designs
  • Develop test plans and test configurations
  • Support test execution
  • Analyze and report test results
  • Verify systems and components meet requirements and specifications
  • Organize test programs used to demonstrate compliance to customers and regulatory agencies
  • Modify existing drawings based on design changes
  • Update systems, components, parts and identification details as required
  • Use 3D CAD tools including Inventor
  • Review sales contracts and identify critical project criteria
  • Support project completion within established budgets
  • Maintain accurate and organized engineering records and documentation
  • Support decision-making and problem-solving throughout assigned projects
  • Perform other duties as assigned

Minimum Qualifications

  • Bachelor’s degree in Mechanical Engineering or Structural Engineering
  • Three to five years of related experience in a mechanical or structural design environment
  • Proficiency with 3D CAD tools
  • Experience with SolidWorks, Inventor or similar platforms
  • Fundamental understanding of 2D CAD tools such as AutoCAD
  • Fundamental understanding of thermodynamics
  • Fundamental understanding of fluid flow
  • Understanding of NFPA requirements
  • Understanding of NEC requirements
  • Understanding of UL requirements
  • Understanding of CE requirements
  • Understanding of OSHA requirements
  • Ability to accurately record and document engineering information
  • Strong interpersonal, verbal and written communication skills
  • Ability to manage multiple tasks in a fast-paced environment
  • Strong decision-making skills
  • Proficiency with general office software
  • Experience with Microsoft Office and/or MRP/ERP systems
  • Ability to follow verbal, written and diagram-based instructions
  • Basic mathematical skills involving whole numbers, fractions and decimals

Preferred Qualifications

  • Experience with engineered-to-order equipment
  • Experience with machine design production environments
  • FEA experience
  • CFD experience

Physical Requirements

  • Ability to sit for extended periods
  • Ability to stand and walk regularly
  • Ability to stoop, bend and reach above shoulder level occasionally
  • Ability to use hands and fingers to handle objects and controls
  • Ability to occasionally lift up to 20 pounds
  • Visual ability sufficient for close and distance work
  • Ability to distinguish colors
  • Sufficient peripheral vision, depth perception and focus adjustment

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have mechanical or structural design experience and are ready to support engineered equipment projects from concept through testing, apply today to join STS Technical Services as a Mechanical Engineer in Milwaukee, Wisconsin.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedSTS

Electrical Engineer

|

14 September 2026

|
No comments

Electrical Engineer Jobs in Archbald, PA

STS Technical Services is hiring an Electrical Engineer in Milwaukee, Wisconsin, to support the design and development of electrical control systems for heat processing and process cleaning equipment.

This position is ideal for an engineer with hands-on PLC programming experience, strong systems integration knowledge and the ability to develop electrical schematics, control architectures and sequence-of-operations documentation.

Position Overview

Under the direction of the Electrical Engineering Manager, the Electrical Engineer II applies electrical engineering principles to the design of heat processing equipment.

Typical areas of responsibility include PLC process programming, operator interfaces, network communications, instrumentation, power distribution and electrical controls. The position performs routine and intermediate engineering assignments while continuing to develop more advanced applied engineering skills.

Responsibilities

  • Design and implement electrical control systems using PLCs, relays, contactors and related devices
  • Work with RTDs, transmitters, switches and other instrumentation
  • Develop electrical schematic drawings and bills of materials
  • Design PLC architectures for heat processing and process cleaning equipment
  • Develop and program PLC software
  • Write sequence-of-operations documentation
  • Use computer-assisted engineering and design software to complete engineering assignments
  • Serve as the electrical technical lead on assigned projects
  • Review sales contracts and identify critical project requirements
  • Support project completion within established budgets
  • Communicate directly with customers regarding approvals, required information and contract progress
  • Monitor compliance with customer requirements
  • Maintain compliance with applicable National, NFPA and UL codes
  • Follow established standards, policies and procedures
  • Maintain accurate and organized engineering records and documentation
  • Support teamwork, customer communication, decision-making and problem-solving throughout assigned projects
  • Perform other duties as assigned

Minimum Qualifications

  • Bachelor’s degree in Electrical Engineering
  • Two to four years of related experience in an Electrical Engineering or PLC environment
  • Experience with heat processing equipment or related equipment design
  • At least two years of PLC programming experience
  • Experience with PLC architecture design and software programming
  • Familiarity with systems integration
  • Experience working with PLCs and HMIs
  • Knowledge of instrumentation
  • Knowledge of networking and communications
  • Knowledge of electrical power distribution
  • Proficiency with 2D and 3D CAD tools
  • Experience with AutoCAD Electrical
  • Familiarity with gas trains and associated codes
  • Understanding of NFPA requirements
  • Understanding of NEC requirements
  • Understanding of UL requirements
  • Understanding of CE requirements
  • Understanding of OSHA requirements
  • Ability to accurately record and document technical information
  • Strong interpersonal, verbal and written communication skills
  • Ability to manage multiple responsibilities in a fast-paced environment
  • Strong decision-making skills
  • Proficiency with general office software
  • Experience with Microsoft Office and/or MRP/ERP systems
  • Ability to follow verbal, written and diagram-based instructions
  • Basic mathematical skills involving whole numbers, fractions and decimals

Preferred Qualifications

  • Associate or bachelor’s degree coursework beyond minimum requirements
  • VFD experience
  • Soft Start experience

Physical Requirements

  • Ability to sit for extended periods
  • Ability to stand and walk regularly
  • Ability to stoop, bend and reach above shoulder level occasionally
  • Ability to use hands and fingers to handle objects and controls
  • Ability to occasionally lift up to 20 pounds
  • Visual ability sufficient for close and distance work
  • Ability to distinguish colors
  • Sufficient peripheral vision, depth perception and focus adjustment

Work Environment

This position is primarily office-based with occasional visits to the plant floor.

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with leading aerospace, manufacturing, defense and industrial organizations across the United States. We connect skilled professionals with career opportunities where their experience can make an immediate impact.

Apply Today

If you have electrical engineering and PLC programming experience and are ready to support complex industrial control systems, apply today to join STS Technical Services as an Electrical Engineer in Milwaukee, Wisconsin.

Equal Opportunity Employer

STS Technical Services is an equal opportunity employer.

#IndeedSTS

Machine Operators

|

14 September 2026

|
No comments

Sheet Metal Machine Operator Jobs in High Ridge Missouri

STS Technical Services is hiring Machine Operators in Glendale, Wisconsin.

STS Technical Services is seeking Machine Operators to support production operations in Glendale, Wisconsin. In this role, you will operate equipment across one or more production value streams while producing high-quality, defect-free products that meet customer specifications and company standards.

Job Responsibilities

  • Follow Schedule Boards and Hour by Hour production boards
  • Print and produce products according to order specifications
  • Perform hand-finishing operations including laminating, stack cutting, and sheeting as required
  • Complete final pre-run inspections, in-process quality checks, and job completion verification
  • Meet established quality and production standards
  • Perform required preventive maintenance on assigned equipment
  • Handle and dispose of hazardous materials and chemicals including inks and cleaning solvents according to company procedures
  • Work from standard work instructions, written procedures, and established processes
  • Address routine production issues and escalate complex concerns to supervisors
  • Communicate with other shifts regarding current jobs, production updates, and operational issues
  • Perform additional duties as assigned

Qualifications

  • High school diploma or equivalent required
  • Basic computer and math skills required
  • Ability to accurately read a ruler within 1/64 inch
  • Ability to lift and carry up to 50 pounds
  • Ability to stand for 80% to 100% of the shift
  • Ability to push and pull up to 22 pounds
  • Ability to climb 8-inch platforms or steps
  • Strong troubleshooting, technical, and analytical skills
  • Detail-oriented with strong quality awareness and work ethic
  • Ability to work independently and within a team environment
  • Mechanical aptitude including the use of hand tools, pneumatic tools, and equipment assembly/disassembly
  • Willingness to learn and support cross-training initiatives

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with some of the largest names in aerospace, manufacturing, defense, and industrial operations. We offer direct hire, contract, and temp-to-perm career opportunities with industry-leading support and long-term career potential.

If you are ready to support high-quality manufacturing operations in Glendale, Wisconsin, apply today.

STS Technical Services is an Equal Opportunity Employer.

#IndeedSTS

Armored Multi-Purpose Vehicle Field Services Technician

|

14 September 2026

|
No comments

Armored Multi-Purpose Vehicle Field Services Technician Job in Anniston, AL STS Technical Services

STS Technical Services is seeking a highly skilled Armored Multi-Purpose Vehicle (AMPV) Field Services Technician for our client’s Anniston, Alabama location. This role requires an expert with extensive knowledge of the AMPV, including mechanical systems, air conditioning systems, hydraulic systems, electrical power management, automotive systems, fire control, weapons systems, remote weapons firing systems, and other subsystems. The ideal candidate will possess the ability to identify and troubleshoot faults, provide leadership and direction to field service teams, and train maintenance and administrative support personnel.

Key Responsibilities:

  • Travel to Military Bases: Conduct vehicle upgrades, modifications, inspections, repairs, services, and maintenance.
  • Technical Guidance: Provide expert technical guidance to internal and external customers.
  • Training: Train soldiers and support personnel on AMPV systems and maintenance.
  • Data Management: Record and communicate complex field data to management.
  • Communication: Ensure effective communication with government and military personnel at all ranks.
  • Judgment: Exercise discretion and independent judgment in all tasks.
  • Relationship Building: Develop and maintain professional relationships with customers and colleagues.
  • Decision Making: Use sound judgment to make decisions while adhering to policies, procedures, and applicable laws and regulations.

Required Skills:

  • US Army Maintenance System Proficiency: Familiarity with US Army Maintenance system or Dealer Management Systems.
  • Technical Interpretation: Ability to interpret and use engineering drawings, schematics, diagrams, and specification sheets.
  • Work Instructions: Competence in reading, understanding, and following technical work instructions and modification work orders (MWOs).
  • Computer Skills: Proficiency with computers for report writing, data management, and word processing.
  • Tools and Equipment: Skilled in using hand and power tools, oscilloscopes, digital volt and ohm meters, diagnostic computers/software, lifting devices, and support equipment.
  • Diagnostic Equipment: Familiarity with Test Measurement and Diagnostic Equipment (TMDE) for automotive, electrical, electronic, and fire control systems.
  • Self-Motivation: Ability to work with minimal supervision.
  • Troubleshooting Expertise: Expertise in troubleshooting and repairing military track vehicles and power plants.
  • Organizational Skills: Strong planning, time management, and organization skills.
  • Interpersonal Skills: Excellent interpersonal skills for interfacing, coordinating, and negotiating with personnel, customers, and suppliers.
  • Analytical Skills: Analytical skills to analyze and perform repairs.
  • Communication Skills: Strong communication skills to serve as a point of contact, resolve conflicts, and effectively communicate both orally and in writing.

Preferred Skills:

  • Military Occupational Specialty (MOS): Feeder MOS: 91M, 63T, 45T, 63M, 91A, 63E, 45E, 91P, 63D, 45D, 91B, 63B, 63S.
  • Security Clearance: Existing Secret Clearance.
  • Armored Vehicle Experience: Experience with armored tracked vehicles.
  • Heavy Equipment Experience: Experience in diagnosing, repairing, and servicing heavy equipment in the private sector.

Experience Required:

  • Field Service Experience: 3 to 5 years in a field service role, mobile mechanic, or heavy equipment mechanic/automotive technician.

Experience Preferred:

  • Extended Field Service Experience: 8 years in a field service role or as a mobile diesel mechanic.
  • Dealership Experience: Dealership experience as a mechanic/technician.
  • Quality Assurance: Quality assurance and vehicle inspection experience.

Education Required:

  • High School Diploma: High School Diploma or Equivalent.

Education Preferred:

  • OEM Training/ASE Certifications: Private sector OEM training or ASE certifications.
  • Automotive Degree: Degree in Automotive Technology.

About STS Technical Services

STS Technical Services is a leading provider of engineering and staffing solutions, dedicated to connecting highly skilled professionals with top companies in the industry. We pride ourselves on delivering exceptional service and support to our clients and employees.

Equal Opportunity Employer

STS Technical Services is committed to providing equal employment opportunities for all job applicants and employees. Employment decisions are based on job-related reasons regardless of an applicant’s race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

#IndeedSTS

Parts Clerk (Savannah)

|

14 September 2026

|
No comments

Parts Clerk Jobs (1)

STS Technical Services is hiring a Parts Clerk in Savannah, Georgia.

Position Summary

The duties and responsibilities of a parts clerk include receiving materials and parts into the facility, maintaining inventory records, and dispensing the parts and materials to other workers in the company. A parts clerk must transact materials into the company database when receiving parts into the company. Parts clerks also record materials and parts out of the system when they are transferred to a production area.

Job Duties

  • Maintain adequate stock levels of commonly used parts
  • Manage warranty part tracking and documentation
  • Interact with customers, vendors, suppliers, mechanics, and internal staff
  • Order, receive, and mark new parts into inventory using company systems
  • Restock bench stock and organize incoming shipments
  • Issue parts to technicians based on work order needs
  • Source and pick up non-standard parts using shop truck when necessary
  • Maintain and update vendor files for equipment sourcing
  • Code purchased parts and supplies to correct chart of accounts
  • Prepare parts for inter-facility transfers to support maintenance schedules
  • Conduct periodic physical inventory counts
  • Maintain a clean and safe work environment following company policies
  • Wear required PPE during all job activities
  • Perform additional tasks as assigned

Qualifications

  • Detail-oriented with strong paperwork and processing accuracy
  • Proficient computer skills and experience with inventory systems
  • Excellent listening and communication abilities, including phone etiquette
  • Effective problem-solving and multitasking skills
  • Customer-focused with a commitment to service quality

Education & Experience

  • High school diploma or equivalent required
  • 2–5 years of experience in parts handling, preferably in a truck or automotive environment

Physical Requirements

  • Regularly required to sit, use hands, reach with arms, and communicate effectively
  • Visual acuity needed for close, distance, and depth perception

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with some of the largest names in aerospace, manufacturing, defense, and industrial operations.

Our recruiting teams put talented professionals to work at client locations all over the world. With hundreds of career opportunities to explore, we invite you to learn more and apply today.

If you’d like to speak directly with a recruiter, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#IndeedSTS

Diesel / Industrial Vehicle Mechanics (Savannah, GA)

|

14 September 2026

|
No comments

Diesel Industrial Vehicle Mechanic Jobs (1)

Do you enjoy turning wrenches and thrive on a challenge? Are you looking to work for a company that appreciates your skills and provides competitive wages? Join us at STS Technical Services in Savannah, Georgia! We offer a family-oriented work environment with opportunities to grow. Whether you have basic vehicle maintenance experience or you’re looking to expand your skills in diesel and heavy truck repair, we have a place for you. On-the-job training is available, and we’re eager to see what you can bring to the team!

Job Summary:

As a Diesel / Industrial Vehicle Mechanic, you will be responsible for maintaining, troubleshooting, and repairing various equipment, including jockey trucks, over-the-road trucks, trailers, forklifts, and automobiles. If you’re detail-oriented, hands-on, and passionate about vehicle maintenance, this role is a perfect fit for you. Pay is commensurate with your experience, and the opportunity to grow in this role is limitless.

Key Responsibilities:

  • Troubleshoot and repair diesel engines, hydraulic systems, electrical systems, and vehicle computer systems.
  • Perform routine inspections, diagnostics, and post-repair evaluations.
  • Maintain and service equipment to ensure proper function, while keeping service records.
  • Inspect, adjust, and repair air brake systems to ensure compliance with safety standards.
  • Examine and adjust safety components on all vehicles as required.
  • Perform preventive maintenance on equipment to ensure longevity and reduce future breakdowns.
  • Change tires, align wheels, and complete other necessary vehicle services.
  • Work on a wide range of vehicle components, including headlights, belts, wiper motors, seats, windows, and air valves.
  • Follow safety protocols, maintaining a clean and organized work area.
  • Test drive vehicles after repairs to ensure they’re operating properly.
  • Document work hours, parts used, and services performed to maintain accurate records.

Qualifications:

  • Basic vehicle maintenance knowledge and experience (diesel and heavy truck repair experience preferred).
  • Forklift experience is an advantage.
  • Ability to obtain a TWIC card.
  • Valid driver’s license.
  • Pass a background check and drug screen.
  • Computer knowledge is a plus (familiarity with work order systems is helpful).
  • Ability to work independently and troubleshoot problems with precision.

Why Join Us?

  • Competitive pay based on experience.
  • On-the-job training with growth opportunities.
  • Family-oriented work environment that values every team member.
  • Stability and career advancement within STS Technical Services.

About STS Technical Services:

STS Technical Services is a premier provider of staffing solutions in the aerospace, manufacturing, and industrial sectors. We connect skilled professionals with leading companies across the United States. At STS, we are committed to delivering high-quality talent while fostering an environment that encourages growth and innovation. Join our team and experience a fulfilling career with endless opportunities.

EEOC Statement:

STS Technical Services is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Apply Today:

Ready to take your career to the next level? Apply now to become a Diesel / Industrial Vehicle Mechanic with STS Technical Services in Savannah, Georgia!

#IndeedSTS

Diesel / Industrial Vehicle Mechanics (LaPorte, TX)

|

14 September 2026

|
No comments

Diesel Industrial Vehicle Mechanic Job in La Porte, Texas STS Technical Services

Job Title: Diesel / Industrial Vehicle Mechanic
Location: LaPorte, Texas
Employer: STS Technical Services

Overview:

Are you passionate about turning wrenches and always ready for a challenge? Do you want to work for a company that appreciates your hard work? Join our family-oriented team at STS Technical Services in LaPorte, Texas! We offer competitive wages and are looking for Diesel / Industrial Vehicle Mechanics to join us. Whether you’re experienced or new to the field, there’s room to grow here!

Job Summary:

As a Diesel / Industrial Vehicle Mechanic at STS Technical Services, you’ll maintain, repair, and troubleshoot a variety of vehicles and machinery. This includes working on everything from over-the-road trucks to forklifts, trailers, and jockey trucks. If you enjoy working hands-on, solving problems, and keeping things running smoothly, we want to hear from you. Competitive pay based on experience is offered, with training available to help you grow in the role.

Key Responsibilities:

  • Troubleshoot and repair various diesel engines, electrical systems, hydraulic systems, and vehicle computer systems.
  • Perform routine diagnostic and post-repair inspections on vehicles, ensuring accuracy and safety.
  • Conduct preventive maintenance and repairs on trucks, forklifts, trailers, and other industrial equipment.
  • Work with air brakes, inspecting, adjusting, and repairing brake systems as needed.
  • Replace components such as headlights, wiper motors, belts, seats, windows, brake chambers, and more.
  • Align wheels, change tires, and maintain general vehicle upkeep.
  • Follow safety procedures and maintain a clean work area in accordance with industry standards.
  • Document work hours, parts used, and services provided.
  • Perform test drives to ensure equipment is functioning properly.

Qualifications:

  • Previous experience in vehicle maintenance or industrial equipment repair (experience with diesel engines and heavy trucks is a plus).
  • Ability to operate material handling equipment such as forklifts and trucks.
  • Must be able to obtain a TWIC card and pass a background check and drug screen.
  • Basic computer skills; knowledge of work order systems and inventory software is a plus.
  • Valid driver’s license required.

Why Join Us:

  • Competitive pay based on experience.
  • On-the-job training with opportunities for career growth.
  • Family-oriented work environment with a strong team spirit.
  • Stable employment with long-term prospects and job security.

At STS Technical Services, we value dedication, work ethic, and a passion for keeping equipment in top working condition. Whether you’re new to the field or looking to take your career to the next level, we offer the support you need to succeed.

About STS Technical Services:

STS Technical Services is a leading provider of staffing and talent solutions, specializing in the aerospace, manufacturing, and industrial sectors. We connect top talent with exciting career opportunities, ensuring that both our clients and employees succeed. We pride ourselves on offering exceptional customer service and creating meaningful, long-lasting partnerships.

EEOC Statement:

STS Technical Services is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Apply Today:

If you’re ready to take the next step in your career and join a team that values your skills, apply now to become a Diesel / Industrial Vehicle Mechanic with STS Technical Services in LaPorte, Texas!

#IndeedSTS

Trailer Mechanic (Charleston)

|

14 September 2026

|
No comments

Trailer Mechanic Jobs

STS Technical Services is partnering with a leading equipment logistics solutions company to hire experienced Trailer Mechanics in Charleston, South Carolina. This is a direct-hire opportunity to join a company that has been in operation since 1946, providing dependable service across the Southeast and central U.S.

If you’re skilled in trailer maintenance and looking for long-term stability, excellent benefits, and a clean, safety-focused work environment, this is the role for you.

Position Summary

As a Trailer Mechanic, you will perform preventative maintenance, diagnostic inspections, and repairs on a variety of trailers to ensure fleet safety and operational efficiency. You will also support minor terminal tractor repairs and complete documentation within the company’s maintenance software system.

Essential Duties and Responsibilities

  • Conduct routine inspections and repairs on trailers, reporting damage and corrective actions
  • Maintain and service trailer systems including air brakes, suspension, electrical, couplers, landing gear, and more
  • Perform welding repairs in various positions (flat, horizontal, vertical, overhead)
  • Assist with minor repairs on terminal tractors as needed
  • Execute test drives to verify functionality after repairs
  • Complete work orders using fleet maintenance software, tracking parts and labor accurately
  • Support team members with additional repair tasks when needed
  • Adhere to all safety protocols and maintain a clean, organized work area
  • Perform additional duties as assigned

Qualifications

  • Experience performing trailer diagnostics, repairs, and preventative maintenance
  • Familiarity with safety procedures and compliance requirements in a maintenance facility
  • Ability to weld and perform mechanical repairs independently
  • Must be able to lift, bend, kneel, and work in various weather conditions

Certificates, Licenses, and Registrations

  • Valid Driver’s License required
  • TWIC card required
  • Forklift operator certification preferred

About the Company

Our client owns and operates more than 2,000 Jockey Trucks/Terminal Tractors and 1,300+ specialty trailers across the United States. Their Houston (La Porte) location is actively growing, and this is your chance to be part of a high-performing, well-established team in a crucial operational role.

Compensation and Benefits

  • Competitive pay based on experience
  • Health, dental, and vision insurance
  • Disability and life insurance
  • 401(k) retirement plan
  • Paid vacation and holidays
  • Drug-Free Workplace

About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that partners with some of the largest names in manufacturing, logistics, defense, and aerospace. We help talented professionals find great opportunities, and we’re committed to making the hiring process as smooth and supportive as possible.

#IndeedSTS